Re: [PATCH v2 1/2] drm/i915/vlv: Make intel_crt_reset() per-encoder

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Fri, Apr 15, 2016 at 03:40:09PM -0400, Lyude wrote:
> This lets call intel_crt_reset() in contexts where IRQs are disabled and
> as such, can't hold the locks required to work with the connectors.
> 
> CC: stable@xxxxxxxxxxxxxxx
> Signed-off-by: Lyude <cpaul@xxxxxxxxxx>

Reviewed-by: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>

> ---
>  drivers/gpu/drm/i915/intel_crt.c | 10 +++++-----
>  1 file changed, 5 insertions(+), 5 deletions(-)
> 
> diff --git a/drivers/gpu/drm/i915/intel_crt.c b/drivers/gpu/drm/i915/intel_crt.c
> index a2a31fd..220ca91 100644
> --- a/drivers/gpu/drm/i915/intel_crt.c
> +++ b/drivers/gpu/drm/i915/intel_crt.c
> @@ -707,11 +707,11 @@ static int intel_crt_set_property(struct drm_connector *connector,
>  	return 0;
>  }
>  
> -static void intel_crt_reset(struct drm_connector *connector)
> +static void intel_crt_reset(struct drm_encoder *encoder)
>  {
> -	struct drm_device *dev = connector->dev;
> +	struct drm_device *dev = encoder->dev;
>  	struct drm_i915_private *dev_priv = dev->dev_private;
> -	struct intel_crt *crt = intel_attached_crt(connector);
> +	struct intel_crt *crt = intel_encoder_to_crt(to_intel_encoder(encoder));
>  
>  	if (INTEL_INFO(dev)->gen >= 5) {
>  		u32 adpa;
> @@ -733,7 +733,6 @@ static void intel_crt_reset(struct drm_connector *connector)
>   */
>  
>  static const struct drm_connector_funcs intel_crt_connector_funcs = {
> -	.reset = intel_crt_reset,
>  	.dpms = drm_atomic_helper_connector_dpms,
>  	.detect = intel_crt_detect,
>  	.fill_modes = drm_helper_probe_single_connector_modes,
> @@ -751,6 +750,7 @@ static const struct drm_connector_helper_funcs intel_crt_connector_helper_funcs
>  };
>  
>  static const struct drm_encoder_funcs intel_crt_enc_funcs = {
> +	.reset = intel_crt_reset,
>  	.destroy = intel_encoder_destroy,
>  };
>  
> @@ -896,5 +896,5 @@ void intel_crt_init(struct drm_device *dev)
>  		dev_priv->fdi_rx_config = I915_READ(FDI_RX_CTL(PIPE_A)) & fdi_config;
>  	}
>  
> -	intel_crt_reset(connector);
> +	intel_crt_reset(&crt->base.base);
>  }
> -- 
> 2.5.5

-- 
Ville Syrjälä
Intel OTC
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel




[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux