Add support for the JDI lt070me05000 WUXGA DSI panel used in
Nexus 7 2013 devices.
Programming sequence for the panel is was originally found in the
android-msm-flo-3.4-lollipop-release branch from:
https://android.googlesource.com/kernel/msm.git
And video mode setting is from dsi-panel-jdi-dualmipi1-video.dtsi
file in:
git://codeaurora.org/kernel/msm-3.10.git LNX.LA.3.6_rb1.27
Other fixes folded in were provided
by Archit Taneja <archit.taneja@xxxxxxxxx>
Cc: Archit Taneja <archit.taneja@xxxxxxxxx>
Signed-off-by: Vinay Simha BN <simhavcs@xxxxxxxxx>
[sumit.semwal: Ported to the drm/panel framework]
Signed-off-by: Sumit Semwal <sumit.semwal@xxxxxxxxxx>
[jstultz: Cherry-picked to mainline, folded down other fixes
from Vinay and Archit]
Signed-off-by: John Stultz <john.stultz@xxxxxxxxxx>
Acked-by: John Stultz <john.stultz@xxxxxxxxxx>
[vinay simha bn: added interface setting cmd mode, cmd or video
mode panel setting selection in panel_init based on mode_flags]
Signed-off-by: Vinay Simha BN <simhavcs@xxxxxxxxx>
---
.../bindings/display/panel/jdi,lt070me05000.txt | 27 +
.../devicetree/bindings/vendor-prefixes.txt | 1 +
drivers/gpu/drm/panel/Kconfig | 11 +
drivers/gpu/drm/panel/Makefile | 1 +
drivers/gpu/drm/panel/panel-jdi-lt070me05000.c | 685 +++++++++++++++++++++
5 files changed, 725 insertions(+)
create mode 100644 Documentation/devicetree/bindings/display/panel/jdi,lt070me05000.txt
create mode 100644 drivers/gpu/drm/panel/panel-jdi-lt070me05000.c
diff --git a/Documentation/devicetree/bindings/display/panel/jdi,lt070me05000.txt b/Documentation/devicetree/bindings/display/panel/jdi,lt070me05000.txt
new file mode 100644
index 0000000..35c5ac7
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/jdi,lt070me05000.txt
@@ -0,0 +1,27 @@
+JDI model LT070ME05000 1920x1200 7" DSI Panel
+
+Basic data sheet is at:
+ http://panelone.net/en/7-0-inch/JDI_LT070ME05000_7.0_inch-datasheet
+
+This panel has video mode implemented currently in the driver.
+
+Required properties:
+- compatible: should be "jdi,lt070me05000"
+
+Optional properties:
+- power-supply: phandle of the regulator that provides the supply voltage
+- reset-gpio: phandle of gpio for reset line
+- backlight: phandle of the backlight device attached to the panel
+
+Example:
+
+ dsi@54300000 {
+ panel: panel@0 {
+ compatible = "jdi,lt070me05000";
+ reg = <0>;
+
+ power-supply = <...>;
+ reset-gpio = <...>;
+ backlight = <...>;
+ };
+ };
diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt
index a580f3e..ec42bb4 100644
--- a/Documentation/devicetree/bindings/vendor-prefixes.txt
+++ b/Documentation/devicetree/bindings/vendor-prefixes.txt
@@ -130,6 +130,7 @@ invensense InvenSense Inc.
isee ISEE 2007 S.L.
isil Intersil
issi Integrated Silicon Solutions Inc.
+jdi Japan Display Inc.
jedec JEDEC Solid State Technology Association
karo Ka-Ro electronics GmbH
keymile Keymile GmbH
diff --git a/drivers/gpu/drm/panel/Kconfig b/drivers/gpu/drm/panel/Kconfig
index 1500ab9..f41690e 100644
--- a/drivers/gpu/drm/panel/Kconfig
+++ b/drivers/gpu/drm/panel/Kconfig
@@ -61,6 +61,17 @@ config DRM_PANEL_SHARP_LQ101R1SX01
To compile this driver as a module, choose M here: the module
will be called panel-sharp-lq101r1sx01.
+config DRM_PANEL_JDI_LT070ME05000
+ tristate "JDI LT070ME05000 WUXGA DSI panel"
+ depends on OF
+ depends on DRM_MIPI_DSI
+ depends on BACKLIGHT_CLASS_DEVICE
+ help
+ Say Y here if you want to enable support for JDI WUXGA DSI video/
+ command mode panel as found in Google Nexus 7 (2013) devices.
+ The panel has a 1200(RGB)×1920 (WUXGA) resolution and uses
+ 24 bit RGB per pixel.
+
config DRM_PANEL_SHARP_LS043T1LE01
tristate "Sharp LS043T1LE01 qHD video mode panel"
depends on OF
diff --git a/drivers/gpu/drm/panel/Makefile b/drivers/gpu/drm/panel/Makefile
index f277eed..e6c6fc8 100644
--- a/drivers/gpu/drm/panel/Makefile
+++ b/drivers/gpu/drm/panel/Makefile
@@ -5,3 +5,4 @@ obj-$(CONFIG_DRM_PANEL_SAMSUNG_LD9040) += panel-samsung-ld9040.o
obj-$(CONFIG_DRM_PANEL_SAMSUNG_S6E8AA0) += panel-samsung-s6e8aa0.o
obj-$(CONFIG_DRM_PANEL_SHARP_LQ101R1SX01) += panel-sharp-lq101r1sx01.o
obj-$(CONFIG_DRM_PANEL_SHARP_LS043T1LE01) += panel-sharp-ls043t1le01.o
+obj-$(CONFIG_DRM_PANEL_JDI_LT070ME05000) += panel-jdi-lt070me05000.o
diff --git a/drivers/gpu/drm/panel/panel-jdi-lt070me05000.c b/drivers/gpu/drm/panel/panel-jdi-lt070me05000.c
new file mode 100644
index 0000000..051aa1b
--- /dev/null
+++ b/drivers/gpu/drm/panel/panel-jdi-lt070me05000.c
@@ -0,0 +1,685 @@
+/*
+ * Copyright (C) 2015 InforceComputing
+ * Author: Vinay Simha BN <simhavcs@xxxxxxxxx>
+ *
+ * Copyright (C) 2015 Linaro Ltd
+ * Author: Sumit Semwal <sumit.semwal@xxxxxxxxxx>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/backlight.h>
+#include <linux/gpio/consumer.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/regulator/consumer.h>
+
+#include <drm/drmP.h>
+#include <drm/drm_crtc.h>
+#include <drm/drm_mipi_dsi.h>
+#include <drm/drm_panel.h>
+
+#include <video/mipi_display.h>
+
+/*
+ * From internet archives, the panel for Nexus 7 2nd Gen, 2013 model is a
+ * JDI model LT070ME05000, and its data sheet is at:
+ * http://panelone.net/en/7-0-inch/JDI_LT070ME05000_7.0_inch-datasheet
+ */
+struct jdi_panel {
+ struct drm_panel base;
+ struct mipi_dsi_device *dsi;
+
+ /* TODO: Add backilght support */
+ struct backlight_device *backlight;
+ struct regulator *supply;
+ struct gpio_desc *reset_gpio;
+ struct gpio_desc *enable_gpio;
+ struct gpio_desc *vcc_gpio;
+
+ struct regulator *backlit;
+ struct regulator *lvs7;
+ struct regulator *avdd;
+ struct regulator *iovdd;
+ struct gpio_desc *pwm_gpio;
+
+ bool prepared;
+ bool enabled;
+
+ const struct drm_display_mode *mode;
+};
+
+static inline struct jdi_panel *to_jdi_panel(struct drm_panel *panel)
+{
+ return container_of(panel, struct jdi_panel, base);
+}
+
+static char MCAP[2] = {0xB0, 0x00};
+static char interface_setting_cmd[6] = {0xB3, 0x04, 0x08, 0x00, 0x22, 0x00};
+static char interface_setting[6] = {0xB3, 0x26, 0x08, 0x00, 0x20, 0x00};
+
+static char interface_ID_setting[2] = {0xB4, 0x0C};
+static char DSI_control[3] = {0xB6, 0x3A, 0xD3};
+
+static char tear_scan_line[3] = {0x44, 0x03, 0x00};
+
+/* for fps control, set fps to 60.32Hz */
+static char LTPS_timing_setting[2] = {0xC6, 0x78};
+static char sequencer_timing_control[2] = {0xD6, 0x01};
+
+/* set brightness */
+static char write_display_brightness[] = {0x51, 0xFF};
+/* enable LEDPWM pin output, turn on LEDPWM output, turn off pwm dimming */
+static char write_control_display[] = {0x53, 0x24};
+/*
+ * choose cabc mode, 0x00(-0%), 0x01(-15%), 0x02(-40%), 0x03(-54%),
+ * disable SRE(sunlight readability enhancement)
+ */
+static char write_cabc[] = {0x55, 0x00};
+/* for cabc mode 0x1(-15%) */
+static char backlight_control1[] = {0xB8, 0x07, 0x87, 0x26, 0x18, 0x00, 0x32};
+/* for cabc mode 0x2(-40%) */
+static char backlight_control2[] = {0xB9, 0x07, 0x75, 0x61, 0x20, 0x16, 0x87};
+/* for cabc mode 0x3(-54%) */
+static char backlight_control3[] = {0xBA, 0x07, 0x70, 0x81, 0x20, 0x45, 0xB4};
+/* for pwm frequency and dimming control */
+static char backlight_control4[] = {0xCE, 0x7D, 0x40, 0x48, 0x56, 0x67, 0x78,
+ 0x88, 0x98, 0xA7, 0xB5, 0xC3, 0xD1, 0xDE, 0xE9, 0xF2, 0xFA,
+ 0xFF, 0x37, 0xF5, 0x0F, 0x0F, 0x42, 0x00};
+
+static int jdi_panel_init(struct jdi_panel *jdi)
+{
+ struct mipi_dsi_device *dsi = jdi->dsi;
+ int ret;
+
+ dsi->mode_flags |= MIPI_DSI_MODE_LPM;
+
+ if (dsi->mode_flags & MIPI_DSI_MODE_VIDEO) {
+ ret = mipi_dsi_dcs_soft_reset(dsi);
+ if (ret < 0)
+ return ret;
+
+ mdelay(10);
+
+ ret = mipi_dsi_dcs_set_pixel_format(dsi, 0x70);
+ if (ret < 0)
+ return ret;
+
+ ret = mipi_dsi_dcs_set_column_address(dsi, 0x0000, 0x04AF);
+ if (ret < 0)
+ return ret;
+
+ ret = mipi_dsi_dcs_set_page_address(dsi, 0x0000, 0x077F);
+ if (ret < 0)
+ return ret;
+
+ ret = mipi_dsi_dcs_set_tear_on(dsi,
+ MIPI_DSI_DCS_TEAR_MODE_VBLANK);
+ if (ret < 0)
+ return ret;
+ mdelay(5);
+
+ ret = mipi_dsi_generic_write(dsi, tear_scan_line,
+ sizeof(tear_scan_line));
+ if (ret < 0)
+ return ret;
+
+ ret = mipi_dsi_dcs_write_buffer(dsi, write_display_brightness,
+ sizeof(write_display_brightness)
+ );
+ if (ret < 0)
+ return ret;
+
+ ret = mipi_dsi_dcs_write_buffer(dsi, write_control_display,
+ sizeof(write_control_display));
+ if (ret < 0)
+ return ret;
+
+ ret = mipi_dsi_dcs_write_buffer(dsi, write_cabc,
+ sizeof(write_cabc));
+ if (ret < 0)
+ return ret;
+
+ ret = mipi_dsi_dcs_exit_sleep_mode(dsi);
+ if (ret < 0)
+ return ret;
+ mdelay(120);
+
+ ret = mipi_dsi_generic_write(dsi, MCAP, sizeof(MCAP));
+ if (ret < 0)
+ return ret;
+ mdelay(10);
+
+ ret = mipi_dsi_generic_write(dsi, interface_setting,
+ sizeof(interface_setting));
+ if (ret < 0)
+ return ret;
+ mdelay(20);
+
+ backlight_control4[18] = 0x04;
+ backlight_control4[19] = 0x00;
+
+ ret = mipi_dsi_generic_write(dsi, backlight_control4,
+ sizeof(backlight_control4));
+ if (ret < 0)
+ return ret;
+ mdelay(20);
+
+ MCAP[1] = 0x03;
+ ret = mipi_dsi_generic_write(dsi, MCAP, sizeof(MCAP));
+ if (ret < 0)
+ return ret;
+ } else {
+ /*
+ * TODO : need to verify panel settings when
+ * dsi cmd mode supported for apq8064 - simhavcs
+ */
+ ret = mipi_dsi_dcs_soft_reset(dsi);
+ if (ret < 0)
+ return ret;
+
+ mdelay(5);
+
+ ret = mipi_dsi_generic_write(dsi, MCAP, sizeof(MCAP));
+ if (ret < 0)
+ return ret;
+
+ ret = mipi_dsi_generic_write(dsi, interface_setting_cmd,
+ sizeof(interface_setting_cmd));
+ if (ret < 0)
+ return ret;
+
+ ret = mipi_dsi_generic_write(dsi, interface_ID_setting,
+ sizeof(interface_ID_setting));
+ if (ret < 0)
+ return ret;
+
+ ret = mipi_dsi_generic_write(dsi, DSI_control,
+ sizeof(DSI_control));
+ if (ret < 0)
+ return ret;
+
+ ret = mipi_dsi_generic_write(dsi, LTPS_timing_setting,
+ sizeof(LTPS_timing_setting));
+ if (ret < 0)
+ return ret;
+
+ ret = mipi_dsi_generic_write(dsi, sequencer_timing_control,
+ sizeof(sequencer_timing_control));
+ if (ret < 0)
+ return ret;
+
+ ret = mipi_dsi_dcs_write_buffer(dsi, write_display_brightness,
+ sizeof(write_display_brightness)
+ );
+ if (ret < 0)
+ return ret;
+
+ ret = mipi_dsi_dcs_write_buffer(dsi, write_control_display,
+ sizeof(write_control_display));
+ if (ret < 0)
+ return ret;
+
+ ret = mipi_dsi_dcs_write_buffer(dsi, write_cabc,
+ sizeof(write_cabc));
+ if (ret < 0)
+ return ret;
+
+ ret = mipi_dsi_generic_write(dsi, backlight_control1,
+ sizeof(backlight_control1));
+ if (ret < 0)
+ return ret;
+
+ ret = mipi_dsi_generic_write(dsi, backlight_control2,
+ sizeof(backlight_control2));
+ if (ret < 0)
+ return ret;
+
+ ret = mipi_dsi_generic_write(dsi, backlight_control3,
+ sizeof(backlight_control3));
+ if (ret < 0)
+ return ret;
+
+ ret = mipi_dsi_generic_write(dsi, backlight_control4,
+ sizeof(backlight_control4));
+ if (ret < 0)
+ return ret;
+
+ ret = mipi_dsi_dcs_set_pixel_format(dsi, 0x77);
+ if (ret < 0)
+ return ret;
+
+ ret = mipi_dsi_dcs_set_column_address(dsi, 0x0000, 0x04AF);
+ if (ret < 0)
+ return ret;
+
+ ret = mipi_dsi_dcs_set_page_address(dsi, 0x0000, 0x077F);
+ if (ret < 0)
+ return ret;
+ mdelay(120);
+
+ ret = mipi_dsi_dcs_exit_sleep_mode(dsi);
+ if (ret < 0)
+ return ret;
+ }
+
+ return 0;
+}
+
+static int jdi_panel_on(struct jdi_panel *jdi)
+{
+ struct mipi_dsi_device *dsi = jdi->dsi;
+ int ret;
+
+ dsi->mode_flags |= MIPI_DSI_MODE_LPM;
+
+ ret = mipi_dsi_dcs_set_display_on(dsi);
+ if (ret < 0)
+ return ret;
+
+ return 0;
+}
+
+static int jdi_panel_off(struct jdi_panel *jdi)
+{
+ struct mipi_dsi_device *dsi = jdi->dsi;
+ int ret;
+
+ dsi->mode_flags &= ~MIPI_DSI_MODE_LPM;
+
+ ret = mipi_dsi_dcs_set_display_off(dsi);
+ if (ret < 0)
+ return ret;
+
+ ret = mipi_dsi_dcs_enter_sleep_mode(dsi);
+ if (ret < 0)
+ return ret;
+
+ ret = mipi_dsi_dcs_set_tear_off(dsi);
+ if (ret < 0)
+ return ret;
+
+ msleep(100);
+
+ return 0;
+}
+
+static int jdi_panel_disable(struct drm_panel *panel)
+{
+ struct jdi_panel *jdi = to_jdi_panel(panel);
+
+ if (!jdi->enabled)
+ return 0;
+
+ DRM_DEBUG("disable\n");
+
+ if (jdi->backlight) {
+ jdi->backlight->props.power = FB_BLANK_POWERDOWN;
+ backlight_update_status(jdi->backlight);
+ }
+
+ jdi->enabled = false;
+
+ return 0;
+}
+
+static int jdi_panel_unprepare(struct drm_panel *panel)
+{
+ struct jdi_panel *jdi = to_jdi_panel(panel);
+ int ret;
+
+ if (!jdi->prepared)
+ return 0;
+
+ DRM_DEBUG("unprepare\n");
+
+ ret = jdi_panel_off(jdi);
+ if (ret) {
+ dev_err(panel->dev, "failed to set panel off: %d\n", ret);
+ return ret;
+ }
+
+ regulator_disable(jdi->supply);
+
+ if (jdi->vcc_gpio)
+ gpiod_set_value(jdi->vcc_gpio, 0);
+
+ if (jdi->reset_gpio)
+ gpiod_set_value(jdi->reset_gpio, 0);
+
+ if (jdi->enable_gpio)
+ gpiod_set_value(jdi->enable_gpio, 0);
+
+ jdi->prepared = false;
+
+ return 0;
+}
+
+static int jdi_panel_prepare(struct drm_panel *panel)
+{
+ struct jdi_panel *jdi = to_jdi_panel(panel);
+ int ret;
+
+ if (jdi->prepared)
+ return 0;
+
+ DRM_DEBUG("prepare\n");
+
+ ret = regulator_enable(jdi->iovdd);
+ if (ret < 0)
+ return ret;
+
+ ret = regulator_enable(jdi->avdd);
+ if (ret < 0)
+ return ret;
+
+ ret = regulator_enable(jdi->backlit);
+ if (ret < 0)
+ return ret;
+
+ ret = regulator_enable(jdi->lvs7);
+ if (ret < 0)
+ return ret;
+
+ ret = regulator_enable(jdi->supply);
+ if (ret < 0)
+ return ret;
+
+ msleep(20);
+
+ if (jdi->vcc_gpio) {
+ gpiod_set_value(jdi->vcc_gpio, 1);
+ usleep_range(10, 20);
+ }
+
+ if (jdi->reset_gpio) {
+ gpiod_set_value(jdi->reset_gpio, 1);
+ usleep_range(10, 20);
+ }
+
+ if (jdi->pwm_gpio) {
+ gpiod_set_value(jdi->pwm_gpio, 1);
+ usleep_range(10, 20);
+ }
+
+ if (jdi->enable_gpio) {
+ gpiod_set_value(jdi->enable_gpio, 1);
+ usleep_range(10, 20);
+ }
+
+ ret = jdi_panel_init(jdi);
+ if (ret) {
+ dev_err(panel->dev, "failed to init panel: %d\n", ret);
+ goto poweroff;
+ }
+
+ ret = jdi_panel_on(jdi);
+ if (ret) {
+ dev_err(panel->dev, "failed to set panel on: %d\n", ret);
+ goto poweroff;
+ }
+
+ jdi->prepared = true;
+
+ return 0;
+
+poweroff:
+ regulator_disable(jdi->supply);
+ if (jdi->reset_gpio)
+ gpiod_set_value(jdi->reset_gpio, 0);
+ if (jdi->enable_gpio)
+ gpiod_set_value(jdi->enable_gpio, 0);
+ if (jdi->vcc_gpio)
+ gpiod_set_value(jdi->vcc_gpio, 0);
+
+ return ret;
+}
+
+static int jdi_panel_enable(struct drm_panel *panel)
+{
+ struct jdi_panel *jdi = to_jdi_panel(panel);
+
+ if (jdi->enabled)
+ return 0;
+
+ DRM_DEBUG("enable\n");
+
+ if (jdi->backlight) {
+ jdi->backlight->props.power = FB_BLANK_UNBLANK;
+ backlight_update_status(jdi->backlight);
+ }
+
+ jdi->enabled = true;
+
+ return 0;
+}
+
+static const struct drm_display_mode default_mode = {
+ .clock = 155000,
+ .hdisplay = 1200,
+ .hsync_start = 1200 + 48,
+ .hsync_end = 1200 + 48 + 32,
+ .htotal = 1200 + 48 + 32 + 60,
+ .vdisplay = 1920,
+ .vsync_start = 1920 + 3,
+ .vsync_end = 1920 + 3 + 5,
+ .vtotal = 1920 + 3 + 5 + 6,
+ .vrefresh = 60,
+ .flags = 0,
+};
+
+static int jdi_panel_get_modes(struct drm_panel *panel)
+{
+ struct drm_display_mode *mode;
+
+ mode = drm_mode_duplicate(panel->drm, &default_mode);
+ if (!mode) {
+ dev_err(panel->drm->dev, "failed to add mode %ux%ux@%u\n",
+ default_mode.hdisplay, default_mode.vdisplay,
+ default_mode.vrefresh);
+ return -ENOMEM;
+ }
+
+ drm_mode_set_name(mode);
+
+ drm_mode_probed_add(panel->connector, mode);
+
+ return 1;
+}
+
+static const struct drm_panel_funcs jdi_panel_funcs = {
+ .disable = jdi_panel_disable,
+ .unprepare = jdi_panel_unprepare,
+ .prepare = jdi_panel_prepare,
+ .enable = jdi_panel_enable,
+ .get_modes = jdi_panel_get_modes,
+};
+
+static const struct of_device_id jdi_of_match[] = {
+ { .compatible = "jdi,lt070me05000", },
+ { }
+};
+MODULE_DEVICE_TABLE(of, jdi_of_match);
+
+static int jdi_panel_add(struct jdi_panel *jdi)
+{
+ struct device *dev = &jdi->dsi->dev;
+ int ret;
+
+ jdi->mode = &default_mode;
+
+ /* lvs5 */
+ jdi->supply = devm_regulator_get(dev, "power");
+ if (IS_ERR(jdi->supply))
+ return PTR_ERR(jdi->supply);
+
+ /* l17 */
+ jdi->backlit = devm_regulator_get(dev, "backlit");
+ if (IS_ERR(jdi->supply))
+ return PTR_ERR(jdi->supply);
+
+ jdi->lvs7 = devm_regulator_get(dev, "lvs7");
+ if (IS_ERR(jdi->lvs7))
+ return PTR_ERR(jdi->lvs7);
+
+ jdi->avdd = devm_regulator_get(dev, "avdd");
+ if (IS_ERR(jdi->avdd))
+ return PTR_ERR(jdi->avdd);
+
+ jdi->iovdd = devm_regulator_get(dev, "iovdd");
+ if (IS_ERR(jdi->iovdd))
+ return PTR_ERR(jdi->iovdd);
+
+ jdi->vcc_gpio = devm_gpiod_get(dev, "vcc", GPIOD_OUT_LOW);
+ if (IS_ERR(jdi->vcc_gpio)) {
+ dev_err(dev, "cannot get vcc-gpio %ld\n",
+ PTR_ERR(jdi->vcc_gpio));
+ jdi->vcc_gpio = NULL;
+ } else {
+ gpiod_direction_output(jdi->vcc_gpio, 0);
+ }
+
+ jdi->reset_gpio = devm_gpiod_get(dev, "reset", GPIOD_OUT_LOW);
+ if (IS_ERR(jdi->reset_gpio)) {
+ dev_err(dev, "cannot get reset-gpios %ld\n",
+ PTR_ERR(jdi->reset_gpio));
+ jdi->reset_gpio = NULL;
+ } else {
+ gpiod_direction_output(jdi->reset_gpio, 0);
+ }
+
+ jdi->enable_gpio = devm_gpiod_get(dev, "enable", GPIOD_OUT_LOW);
+ if (IS_ERR(jdi->enable_gpio)) {
+ dev_err(dev, "cannot get enable-gpio %ld\n",
+ PTR_ERR(jdi->enable_gpio));
+ jdi->enable_gpio = NULL;
+ } else {
+ gpiod_direction_output(jdi->enable_gpio, 0);
+ }
+
+ jdi->pwm_gpio = devm_gpiod_get(dev, "pwm", GPIOD_OUT_LOW);
+ if (IS_ERR(jdi->pwm_gpio)) {
+ dev_err(dev, "cannot get pwm-gpio %ld\n",
+ PTR_ERR(jdi->pwm_gpio));
+ jdi->pwm_gpio = NULL;
+ } else {
+ gpiod_direction_output(jdi->pwm_gpio, 0);
+ }
+
+ /* we don't have backlight right now, proceed further */
+#ifdef BACKLIGHT
+ np = of_parse_phandle(dev->of_node, "backlight", 0);
+ if (np) {
+ jdi->backlight = of_find_backlight_by_node(np);
+ of_node_put(np);
+
+ if (!jdi->backlight)
+ return -EPROBE_DEFER;
+ }
+#endif
+
+ drm_panel_init(&jdi->base);
+ jdi->base.funcs = &jdi_panel_funcs;
+ jdi->base.dev = &jdi->dsi->dev;
+
+ ret = drm_panel_add(&jdi->base);
+ if (ret < 0)
+ goto put_backlight;
+
+ return 0;
+
+put_backlight:
+ if (jdi->backlight)
+ put_device(&jdi->backlight->dev);
+
+ return ret;
+}
+
+static void jdi_panel_del(struct jdi_panel *jdi)
+{
+ if (jdi->base.dev)
+ drm_panel_remove(&jdi->base);
+
+ if (jdi->backlight)
+ put_device(&jdi->backlight->dev);
+}
+
+static int jdi_panel_probe(struct mipi_dsi_device *dsi)
+{
+ struct jdi_panel *jdi;
+ int ret;
+
+ dsi->lanes = 4;
+ dsi->format = MIPI_DSI_FMT_RGB888;
+ dsi->mode_flags = MIPI_DSI_MODE_VIDEO_HSE | MIPI_DSI_MODE_VIDEO |
+ MIPI_DSI_MODE_VIDEO_HFP | MIPI_DSI_MODE_VIDEO_HBP |
+ MIPI_DSI_MODE_VIDEO_HSA |
+ MIPI_DSI_CLOCK_NON_CONTINUOUS;
+
+ jdi = devm_kzalloc(&dsi->dev, sizeof(*jdi), GFP_KERNEL);
+ if (!jdi)
+ return -ENOMEM;
+
+ mipi_dsi_set_drvdata(dsi, jdi);
+
+ jdi->dsi = dsi;
+
+ ret = jdi_panel_add(jdi);
+ if (ret < 0)
+ return ret;
+
+ return mipi_dsi_attach(dsi);
+}
+
+static int jdi_panel_remove(struct mipi_dsi_device *dsi)
+{
+ struct jdi_panel *jdi = mipi_dsi_get_drvdata(dsi);
+ int ret;
+
+ ret = jdi_panel_disable(&jdi->base);
+ if (ret < 0)
+ dev_err(&dsi->dev, "failed to disable panel: %d\n", ret);
+
+ ret = mipi_dsi_detach(dsi);
+ if (ret < 0)
+ dev_err(&dsi->dev, "failed to detach from DSI host: %d\n",
+ ret);
+
+ drm_panel_detach(&jdi->base);
+ jdi_panel_del(jdi);
+
+ return 0;
+}
+
+static void jdi_panel_shutdown(struct mipi_dsi_device *dsi)
+{
+ struct jdi_panel *jdi = mipi_dsi_get_drvdata(dsi);
+
+ jdi_panel_disable(&jdi->base);
+}
+
+static struct mipi_dsi_driver jdi_panel_driver = {
+ .driver = {
+ .name = "panel-jdi-lt070me05000",
+ .of_match_table = jdi_of_match,
+ },
+ .probe = jdi_panel_probe,
+ .remove = jdi_panel_remove,
+ .shutdown = jdi_panel_shutdown,
+};
+module_mipi_dsi_driver(jdi_panel_driver);
+
+MODULE_AUTHOR("Sumit Semwal <sumit.semwal@xxxxxxxxxx>");
+MODULE_AUTHOR("Vinay Simha BN <simhavcs@xxxxxxxxx>");
+MODULE_DESCRIPTION("JDI WUXGA LT070ME05000 DSI video/command mode panel driver");
+MODULE_LICENSE("GPL v2");
--
2.1.2
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel
