This patch cleans up interface type relevant codes.
Trigger mode is determinded only by i80 mode, which isn't
related to Display types - HDMI or Display controller.
So this patch makes the trigger mode to be set only in case of
i80 mode - For DECON-TV, HW Trigger mode is flaged mandatorily
because HDMI Timing Generator generates VSYNC signal
which works as a hardware trigger.
Changelog v2.
- If interface type is HDMI then set out_type to I80.
- fix compile warning.
Signed-off-by: Inki Dae <inki.dae@xxxxxxxxxxx>
---
drivers/gpu/drm/exynos/exynos5433_drm_decon.c | 57 ++++++++++++++-------------
1 file changed, 30 insertions(+), 27 deletions(-)
diff --git a/drivers/gpu/drm/exynos/exynos5433_drm_decon.c b/drivers/gpu/drm/exynos/exynos5433_drm_decon.c
index 5245bc5..eacbb73 100644
--- a/drivers/gpu/drm/exynos/exynos5433_drm_decon.c
+++ b/drivers/gpu/drm/exynos/exynos5433_drm_decon.c
@@ -28,6 +28,10 @@
#define WINDOWS_NR 3
#define MIN_FB_WIDTH_FOR_16WORD_BURST 128
+#define IFTYPE_I80 (1 << 0)
+#define I80_HW_TRG (1 << 1)
+#define IFTYPE_HDMI (1 << 2)
+
static const char * const decon_clks_name[] = {
"pclk",
"aclk_decon",
@@ -38,12 +42,6 @@ static const char * const decon_clks_name[] = {
"sclk_decon_eclk",
};
-enum decon_iftype {
- IFTYPE_RGB,
- IFTYPE_I80,
- IFTYPE_HDMI
-};
-
enum decon_flag_bits {
BIT_CLKS_ENABLED,
BIT_IRQS_ENABLED,
@@ -61,7 +59,7 @@ struct decon_context {
struct clk *clks[ARRAY_SIZE(decon_clks_name)];
int pipe;
unsigned long flags;
- enum decon_iftype out_type;
+ unsigned long out_type;
int first_win;
};
@@ -95,7 +93,7 @@ static int decon_enable_vblank(struct exynos_drm_crtc *crtc)
if (!test_and_set_bit(BIT_IRQS_ENABLED, &ctx->flags)) {
val = VIDINTCON0_INTEN;
- if (ctx->out_type == IFTYPE_I80)
+ if (ctx->out_type & IFTYPE_I80)
val |= VIDINTCON0_FRAMEDONE;
else
val |= VIDINTCON0_INTFRMEN;
@@ -119,7 +117,7 @@ static void decon_disable_vblank(struct exynos_drm_crtc *crtc)
static void decon_setup_trigger(struct decon_context *ctx)
{
- u32 val = (ctx->out_type != IFTYPE_HDMI)
+ u32 val = !(ctx->out_type & I80_HW_TRG)
? TRIGCON_TRIGEN_PER_F | TRIGCON_TRIGEN_F |
TRIGCON_TE_AUTO_MASK | TRIGCON_SWTRIGEN
: TRIGCON_TRIGEN_PER_F | TRIGCON_TRIGEN_F |
@@ -136,7 +134,7 @@ static void decon_commit(struct exynos_drm_crtc *crtc)
if (test_bit(BIT_SUSPENDED, &ctx->flags))
return;
- if (ctx->out_type == IFTYPE_HDMI) {
+ if (ctx->out_type & IFTYPE_HDMI) {
m->crtc_hsync_start = m->crtc_hdisplay + 10;
m->crtc_hsync_end = m->crtc_htotal - 92;
m->crtc_vsync_start = m->crtc_vdisplay + 1;
@@ -151,17 +149,20 @@ static void decon_commit(struct exynos_drm_crtc *crtc)
/* lcd on and use command if */
val = VIDOUT_LCD_ON;
- if (ctx->out_type == IFTYPE_I80)
+ if (ctx->out_type & IFTYPE_I80) {
val |= VIDOUT_COMMAND_IF;
- else
+ decon_setup_trigger(ctx);
+ } else {
val |= VIDOUT_RGB_IF;
+ }
+
writel(val, ctx->addr + DECON_VIDOUTCON0);
val = VIDTCON2_LINEVAL(m->vdisplay - 1) |
VIDTCON2_HOZVAL(m->hdisplay - 1);
writel(val, ctx->addr + DECON_VIDTCON2);
- if (ctx->out_type != IFTYPE_I80) {
+ if (!(ctx->out_type & IFTYPE_I80)) {
val = VIDTCON00_VBPD_F(
m->crtc_vtotal - m->crtc_vsync_end - 1) |
VIDTCON00_VFPD_F(
@@ -183,8 +184,6 @@ static void decon_commit(struct exynos_drm_crtc *crtc)
writel(val, ctx->addr + DECON_VIDTCON11);
}
- decon_setup_trigger(ctx);
-
/* enable output and display signal */
decon_set_bits(ctx, DECON_VIDCON0, VIDCON0_ENVID | VIDCON0_ENVID_F, ~0);
}
@@ -300,7 +299,7 @@ static void decon_update_plane(struct exynos_drm_crtc *crtc,
val = dma_addr + pitch * state->src.h;
writel(val, ctx->addr + DECON_VIDW0xADD1B0(win));
- if (ctx->out_type != IFTYPE_HDMI)
+ if (!(ctx->out_type & IFTYPE_HDMI))
val = BIT_VAL(pitch - state->crtc.w * bpp, 27, 14)
| BIT_VAL(state->crtc.w * bpp, 13, 0);
else
@@ -348,7 +347,7 @@ static void decon_atomic_flush(struct exynos_drm_crtc *crtc)
for (i = ctx->first_win; i < WINDOWS_NR; i++)
decon_shadow_protect_win(ctx, i, false);
- if (ctx->out_type == IFTYPE_I80)
+ if (ctx->out_type & IFTYPE_I80)
set_bit(BIT_WIN_UPDATED, &ctx->flags);
}
@@ -374,7 +373,7 @@ static void decon_swreset(struct decon_context *ctx)
WARN(tries == 0, "failed to software reset DECON\n");
- if (ctx->out_type != IFTYPE_HDMI)
+ if (!(ctx->out_type & IFTYPE_HDMI))
return;
writel(VIDCON0_CLKVALUP | VIDCON0_VLCKFREE, ctx->addr + DECON_VIDCON0);
@@ -383,7 +382,9 @@ static void decon_swreset(struct decon_context *ctx)
writel(VIDCON1_VCLK_RUN_VDEN_DISABLE, ctx->addr + DECON_VIDCON1);
writel(CRCCTRL_CRCEN | CRCCTRL_CRCSTART_F | CRCCTRL_CRCCLKEN,
ctx->addr + DECON_CRCCTRL);
- decon_setup_trigger(ctx);
+
+ if (ctx->out_type & IFTYPE_I80)
+ decon_setup_trigger(ctx);
}
static void decon_enable(struct exynos_drm_crtc *crtc)
@@ -509,7 +510,7 @@ static int decon_bind(struct device *dev, struct device *master, void *data)
}
exynos_plane = &ctx->planes[ctx->first_win];
- out_type = (ctx->out_type == IFTYPE_HDMI) ? EXYNOS_DISPLAY_TYPE_HDMI
+ out_type = (ctx->out_type & IFTYPE_HDMI) ? EXYNOS_DISPLAY_TYPE_HDMI
: EXYNOS_DISPLAY_TYPE_LCD;
ctx->crtc = exynos_drm_crtc_create(drm_dev, &exynos_plane->base,
ctx->pipe, out_type,
@@ -617,11 +618,11 @@ static const struct dev_pm_ops exynos5433_decon_pm_ops = {
static const struct of_device_id exynos5433_decon_driver_dt_match[] = {
{
.compatible = "samsung,exynos5433-decon",
- .data = (void *)IFTYPE_RGB
+ .data = (void *)I80_HW_TRG
},
{
.compatible = "samsung,exynos5433-decon-tv",
- .data = (void *)IFTYPE_HDMI
+ .data = (void *)(I80_HW_TRG | IFTYPE_HDMI)
},
{},
};
@@ -644,12 +645,14 @@ static int exynos5433_decon_probe(struct platform_device *pdev)
ctx->dev = dev;
of_id = of_match_device(exynos5433_decon_driver_dt_match, &pdev->dev);
- ctx->out_type = (enum decon_iftype)of_id->data;
+ ctx->out_type = (unsigned long)of_id->data;
- if (ctx->out_type == IFTYPE_HDMI)
+ if (ctx->out_type & IFTYPE_HDMI) {
ctx->first_win = 1;
- else if (of_get_child_by_name(dev->of_node, "i80-if-timings"))
- ctx->out_type = IFTYPE_I80;
+ ctx->out_type |= IFTYPE_I80;
+ } else if (of_get_child_by_name(dev->of_node, "i80-if-timings")) {
+ ctx->out_type |= IFTYPE_I80;
+ }
for (i = 0; i < ARRAY_SIZE(decon_clks_name); i++) {
struct clk *clk;
@@ -674,7 +677,7 @@ static int exynos5433_decon_probe(struct platform_device *pdev)
}
res = platform_get_resource_byname(pdev, IORESOURCE_IRQ,
- (ctx->out_type == IFTYPE_I80) ? "lcd_sys" : "vsync");
+ (ctx->out_type & IFTYPE_I80) ? "lcd_sys" : "vsync");
if (!res) {
dev_err(dev, "cannot find IRQ resource\n");
return -ENXIO;
--
1.9.1
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel
