On Mon, Apr 04, 2016 at 12:16:02AM -0500, Rob Herring wrote:
> On Fri, Apr 01, 2016 at 05:21:51PM +0100, Liviu Dudau wrote:
> > Add DT bindings documentation for the Mali Display Processor. The bindings
> > describe the Mali DP500, DP550 and DP650 processors from ARM Ltd.
> >
> > Cc: Rob Herring <robh+dt@xxxxxxxxxx>
> > Cc: Pawel Moll <pawel.moll@xxxxxxx>
> > Cc: Mark Rutland <mark.rutland@xxxxxxx>
> > Cc: Ian Campbell <ijc+devicetree@xxxxxxxxxxxxxx>
> > Cc: Kumar Gala <galak@xxxxxxxxxxxxxx>
> >
> > Signed-off-by: Liviu Dudau <Liviu.Dudau@xxxxxxx>
> > ---
> > .../devicetree/bindings/display/arm,malidp.txt | 65 ++++++++++++++++++++++
> > 1 file changed, 65 insertions(+)
> > create mode 100644 Documentation/devicetree/bindings/display/arm,malidp.txt
> >
> > diff --git a/Documentation/devicetree/bindings/display/arm,malidp.txt b/Documentation/devicetree/bindings/display/arm,malidp.txt
> > new file mode 100644
> > index 0000000..ed70de3
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/display/arm,malidp.txt
> > @@ -0,0 +1,65 @@
> > +ARM Mali-DP
> > +
> > +The following bindings apply to a family of Display Processors sold as
> > +licensable IP by ARM Ltd. The bindings describe the Mali DP500, DP550 and
> > +DP650 processors that offer multiple composition layers, support for
> > +rotation and scaling output.
> > +
> > +Required properties:
> > + - compatible: should be one of
> > + "arm,mali-dp500"
> > + "arm,mali-dp550"
> > + "arm,mali-dp650"
> > + depending on the particular implementation present in the hardware
>
> I assume these have revisions and configuration options. These will need
> SoC specific properties as well. No need to add one now if you don't
> have an SoC to list, but just note something to this effect.
There are revisions, indeed, but contrained at the moment to ARM's internal
builds. As for the configuration options, those are being detected in the
driver by querying a config_id register. Not all the features there correspond
to a revision number though, so I'll take a "wait and see" approach to adding
additional information in the DT bindings.
>
> > + - reg: Physical base address and size of the block of registers used by
> > + the processor.
> > + - interrupts: Interrupt list, as defined in ../interrupt-controller/interrupts.txt,
> > + interrupt client nodes.
> > + - interrupt-names: name of the engine inside the processor that will
> > + use the corresponding interrupt. Should be one of "DE" or "SE".
>
> This is worded like it is either one, but the example shows both.
You (and MarkR) are right, the intent was to say that for each interrupt in the
interrupts list you use a name in the interrupt-name and that name can be either
"DE" or "SE". I will rephrase it to make it more clear.
>
> > + - clocks: A list of phandle + clock-specifier pairs, one for each entry
> > + in 'clock-names'
> > + - clock-names: A list of clock names. It should contain:
> > + - "pclk": for the APB interface clock
> > + - "aclk": for the AXI interface clock
> > + - "mclk": for the main processor clock
> > + - "pxlclk": for the pixel clock feeding the output PLL of the processor.
> > + - arm,malidp-output-port-lines: Array of u8 values describing the number
> > + of output lines per channel (R, G and B).
>
> This should be a function of the type of panel you connect and
> shouldn't be needed.
Hmm, not sure I understand you here. Mali DP can export a number of parallel lines
per color component, but that doesn't automatically translate into how many of those
are being used as input to the encoder, and there are no standard bindings in the
encoders either to query the configuration. So I need a way somewhere to describe
how hardware has been wired. I thought DTs are one such place. Do you have a better
idea or example?
>
> > +
> > +Required sub-nodes:
> > + - port: The Mali DP connection to an encoder input port. The connection
> > + is modelled using the OF graph bindings specified in
> > + Documentation/devicetree/bindings/graph.txt
> > +
> > +Optional properties:
> > + - memory-region: phandle to a node describing memory (see
> > + Documentation/devicetree/bindings/reserved-memory/reserved-memory.txt)
> > + to be used for the framebuffer; if not present, the framebuffer may
> > + be located anywhere in memory.
> > +
> > +
> > +Example:
> > +
> > +/ {
> > + ...
> > +
> > + dp0: malidp@6f200000 {
>
> display-controller@
Will change!
Thanks for the review!
Liviu
>
> > + compatible = "arm,mali-dp650";
> > + reg = <0 0x6f200000 0 0x20000>;
> > + memory-region = <&display_reserved>;
> > + interrupts = <0 168 IRQ_TYPE_LEVEL_HIGH>,
> > + <0 168 IRQ_TYPE_LEVEL_HIGH>;
> > + interrupt-names = "DE", "SE";
> > + clocks = <&oscclk2>, <&fpgaosc0>, <&fpgaosc1>, <&fpgaosc1>;
> > + clock-names = "pxlclk", "mclk", "aclk", "pclk";
> > + arm,malidp-output-port-lines = /bits/ 8 <8 8 8>;
> > + port {
> > + dp0_output: endpoint {
> > + remote-endpoint = <&tda998x_2_input>;
> > + };
> > + };
> > + };
> > +
> > + ...
> > +};
> > --
> > 2.7.1
> >
> > --
> > To unsubscribe from this list: send the line "unsubscribe devicetree" in
> > the body of a message to majordomo@xxxxxxxxxxxxxxx
> > More majordomo info at http://vger.kernel.org/majordomo-info.html
>
--
====================
| I would like to |
| fix the world, |
| but they're not |
| giving me the |
\ source code! /
---------------
¯\_(ツ)_/¯
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel
