Re: [PATCH 1/5] drm: Add new DCS commands in the enum list

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 03/30/2016 04:03 PM, Jani Nikula wrote:
> From: Deepak M <m.deepak@xxxxxxxxx>
>
> Adding new DCS commands which are specified in the
> DCS 1.3 spec related to CABC.
>
> v2: Sorted the Macro`s by value (Andrzej)
>
> v3 by Jani: sort all of enum, refer to MIPI DCS 1.3
>
> Cc: Andrzej Hajda <a.hajda@xxxxxxxxxxx>
> Cc: Thierry Reding <thierry.reding@xxxxxxxxx>
> Cc: David Airlie <airlied@xxxxxxxx>
> Cc: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
> Cc: Daniel Vetter <daniel.vetter@xxxxxxxxx>
> Cc: <dri-devel@xxxxxxxxxxxxxxxxxxxxx>
> Suggested-by: Jani Nikula <jani.nikula@xxxxxxxxx>
> Signed-off-by: Deepak M <m.deepak@xxxxxxxxx>
> Signed-off-by: Jani Nikula <jani.nikula@xxxxxxxxx>

DCS 1.3 introduces also:
get_error_count_on_DSI 05h
get_image_checksum_ct 15h
get_image_checksum_rgb 14h
read_PPS_continue a9h
read_PPS_start A2h

It would be good to add them, but as the patch
says it adds only CABC related commands so no big deal.

Reviewed-by: Andrzej Hajda <a.hajda@xxxxxxxxxxx>

Regards
Andrzej

> ---
>  include/video/mipi_display.h | 8 ++++++++
>  1 file changed, 8 insertions(+)
>
> diff --git a/include/video/mipi_display.h b/include/video/mipi_display.h
> index ddcc8ca7316b..19aa65a35546 100644
> --- a/include/video/mipi_display.h
> +++ b/include/video/mipi_display.h
> @@ -115,6 +115,14 @@ enum {
>  	MIPI_DCS_READ_MEMORY_CONTINUE	= 0x3E,
>  	MIPI_DCS_SET_TEAR_SCANLINE	= 0x44,
>  	MIPI_DCS_GET_SCANLINE		= 0x45,
> +	MIPI_DCS_SET_DISPLAY_BRIGHTNESS = 0x51,		/* MIPI DCS 1.3 */
> +	MIPI_DCS_GET_DISPLAY_BRIGHTNESS = 0x52,		/* MIPI DCS 1.3 */
> +	MIPI_DCS_WRITE_CONTROL_DISPLAY  = 0x53,		/* MIPI DCS 1.3 */
> +	MIPI_DCS_GET_CONTROL_DISPLAY	= 0x54,		/* MIPI DCS 1.3 */
> +	MIPI_DCS_WRITE_POWER_SAVE	= 0x55,		/* MIPI DCS 1.3 */
> +	MIPI_DCS_GET_POWER_SAVE		= 0x56,		/* MIPI DCS 1.3 */
> +	MIPI_DCS_SET_CABC_MIN_BRIGHTNESS = 0x5E,	/* MIPI DCS 1.3 */
> +	MIPI_DCS_GET_CABC_MIN_BRIGHTNESS = 0x5F,	/* MIPI DCS 1.3 */
>  	MIPI_DCS_READ_DDB_START		= 0xA1,
>  	MIPI_DCS_READ_DDB_CONTINUE	= 0xA8,
>  };

_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel




[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux