[PATCH 25/52] drm/amd/powerplay: add thermal control for elm/baf

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Eric Huang <JinHuiEric.Huang@xxxxxxx>

Signed-off-by: Eric Huang <JinHuiEric.Huang@xxxxxxx>
Reviewed-by: Alex Deucher <alexander.deucher@xxxxxxx>
---
 drivers/gpu/drm/amd/powerplay/hwmgr/Makefile       |   2 +-
 .../gpu/drm/amd/powerplay/hwmgr/ellesmere_hwmgr.c  |  39 +-
 .../drm/amd/powerplay/hwmgr/ellesmere_thermal.c    | 711 +++++++++++++++++++++
 .../drm/amd/powerplay/hwmgr/ellesmere_thermal.h    |  62 ++
 4 files changed, 801 insertions(+), 13 deletions(-)
 create mode 100644 drivers/gpu/drm/amd/powerplay/hwmgr/ellesmere_thermal.c
 create mode 100644 drivers/gpu/drm/amd/powerplay/hwmgr/ellesmere_thermal.h

diff --git a/drivers/gpu/drm/amd/powerplay/hwmgr/Makefile b/drivers/gpu/drm/amd/powerplay/hwmgr/Makefile
index 2982d5c..f13327d 100644
--- a/drivers/gpu/drm/amd/powerplay/hwmgr/Makefile
+++ b/drivers/gpu/drm/amd/powerplay/hwmgr/Makefile
@@ -9,7 +9,7 @@ HARDWARE_MGR = hwmgr.o processpptables.o functiontables.o \
                tonga_hwmgr.o pppcielanes.o  tonga_thermal.o\
                fiji_powertune.o fiji_hwmgr.o tonga_clockpowergating.o \
                fiji_clockpowergating.o fiji_thermal.o \
-	       ellesmere_hwmgr.o ellesmere_powertune.o
+	       ellesmere_hwmgr.o ellesmere_powertune.o ellesmere_thermal.o
 
 AMD_PP_HWMGR = $(addprefix $(AMD_PP_PATH)/hwmgr/,$(HARDWARE_MGR))
 
diff --git a/drivers/gpu/drm/amd/powerplay/hwmgr/ellesmere_hwmgr.c b/drivers/gpu/drm/amd/powerplay/hwmgr/ellesmere_hwmgr.c
index 10e8e87..3ef8d3c 100644
--- a/drivers/gpu/drm/amd/powerplay/hwmgr/ellesmere_hwmgr.c
+++ b/drivers/gpu/drm/amd/powerplay/hwmgr/ellesmere_hwmgr.c
@@ -57,6 +57,8 @@
 #include "dce/dce_10_0_d.h"
 #include "dce/dce_10_0_sh_mask.h"
 
+#include "ellesmere_thermal.h"
+
 #define MC_CG_ARB_FREQ_F0           0x0a
 #define MC_CG_ARB_FREQ_F1           0x0b
 #define MC_CG_ARB_FREQ_F2           0x0c
@@ -4198,8 +4200,14 @@ static int ellesmere_set_power_state_tasks(struct pp_hwmgr *hwmgr, const void *i
 
 static int ellesmere_set_max_fan_pwm_output(struct pp_hwmgr *hwmgr, uint16_t us_max_fan_pwm)
 {
+	hwmgr->thermal_controller.
+	advanceFanControlParameters.usMaxFanPWM = us_max_fan_pwm;
 
+	if (phm_is_hw_access_blocked(hwmgr))
 		return 0;
+
+	return smum_send_msg_to_smc_with_parameter(hwmgr->smumgr,
+			PPSMC_MSG_SetFanPwmMax, us_max_fan_pwm);
 }
 
 int ellesmere_notify_smc_display_change(struct pp_hwmgr *hwmgr, bool has_display)
@@ -4290,9 +4298,16 @@ int ellesmere_display_configuration_changed_task(struct pp_hwmgr *hwmgr)
 * @param    usMaxFanRpm:  max operating fan RPM value.
 * @return   The response that came from the SMC.
 */
-static int ellesmere_set_max_fan_rpm_output(struct pp_hwmgr *hwmgr, uint16_t us_max_fan_pwm)
+static int ellesmere_set_max_fan_rpm_output(struct pp_hwmgr *hwmgr, uint16_t us_max_fan_rpm)
 {
-	return 0;
+	hwmgr->thermal_controller.
+	advanceFanControlParameters.usMaxFanRPM = us_max_fan_rpm;
+
+	if (phm_is_hw_access_blocked(hwmgr))
+		return 0;
+
+	return smum_send_msg_to_smc_with_parameter(hwmgr->smumgr,
+			PPSMC_MSG_SetFanRpmMax, us_max_fan_rpm);
 }
 
 int ellesmere_register_internal_thermal_interrupt(struct pp_hwmgr *hwmgr,
@@ -4529,15 +4544,15 @@ static const struct pp_hwmgr_func ellesmere_hwmgr_funcs = {
 	.display_config_changed = ellesmere_display_configuration_changed_task,
 	.set_max_fan_pwm_output = ellesmere_set_max_fan_pwm_output,
 	.set_max_fan_rpm_output = ellesmere_set_max_fan_rpm_output,
-	.get_temperature = NULL,
-	.stop_thermal_controller = NULL,
-	.get_fan_speed_info = NULL,
-	.get_fan_speed_percent = NULL,
-	.set_fan_speed_percent = NULL,
-	.reset_fan_speed_to_default = NULL,
-	.get_fan_speed_rpm = NULL,
-	.set_fan_speed_rpm = NULL,
-	.uninitialize_thermal_controller = NULL,
+	.get_temperature = ellesmere_thermal_get_temperature,
+	.stop_thermal_controller = ellesmere_thermal_stop_thermal_controller,
+	.get_fan_speed_info = ellesmere_fan_ctrl_get_fan_speed_info,
+	.get_fan_speed_percent = ellesmere_fan_ctrl_get_fan_speed_percent,
+	.set_fan_speed_percent = ellesmere_fan_ctrl_set_fan_speed_percent,
+	.reset_fan_speed_to_default = ellesmere_fan_ctrl_reset_fan_speed_to_default,
+	.get_fan_speed_rpm = ellesmere_fan_ctrl_get_fan_speed_rpm,
+	.set_fan_speed_rpm = ellesmere_fan_ctrl_set_fan_speed_rpm,
+	.uninitialize_thermal_controller = ellesmere_thermal_ctrl_uninitialize_thermal_controller,
 	.register_internal_thermal_interrupt = ellesmere_register_internal_thermal_interrupt,
 	.check_smc_update_required_for_display_configuration = ellesmere_check_smc_update_required_for_display_configuration,
 	.check_states_equal = ellesmere_check_states_equal,
@@ -4554,7 +4569,7 @@ int ellesemere_hwmgr_init(struct pp_hwmgr *hwmgr)
 	hwmgr->backend = data;
 	hwmgr->hwmgr_func = &ellesmere_hwmgr_funcs;
 	hwmgr->pptable_func = &tonga_pptable_funcs;
-
+	pp_ellesmere_thermal_initialize(hwmgr);
 
 	return 0;
 }
diff --git a/drivers/gpu/drm/amd/powerplay/hwmgr/ellesmere_thermal.c b/drivers/gpu/drm/amd/powerplay/hwmgr/ellesmere_thermal.c
new file mode 100644
index 0000000..08be400
--- /dev/null
+++ b/drivers/gpu/drm/amd/powerplay/hwmgr/ellesmere_thermal.c
@@ -0,0 +1,711 @@
+/*
+ * Copyright 2016 Advanced Micro Devices, Inc.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
+ * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR
+ * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+ * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ *
+ */
+
+#include "ellesmere_thermal.h"
+#include "ellesmere_hwmgr.h"
+#include "ellesmere_smumgr.h"
+#include "ellesmere_ppsmc.h"
+#include "smu/smu_7_1_3_d.h"
+#include "smu/smu_7_1_3_sh_mask.h"
+
+int ellesmere_fan_ctrl_get_fan_speed_info(struct pp_hwmgr *hwmgr,
+		struct phm_fan_speed_info *fan_speed_info)
+{
+	if (hwmgr->thermal_controller.fanInfo.bNoFan)
+		return 0;
+
+	fan_speed_info->supports_percent_read = true;
+	fan_speed_info->supports_percent_write = true;
+	fan_speed_info->min_percent = 0;
+	fan_speed_info->max_percent = 100;
+
+	if (phm_cap_enabled(hwmgr->platform_descriptor.platformCaps,
+			PHM_PlatformCaps_FanSpeedInTableIsRPM) &&
+		hwmgr->thermal_controller.fanInfo.ucTachometerPulsesPerRevolution) {
+		fan_speed_info->supports_rpm_read = true;
+		fan_speed_info->supports_rpm_write = true;
+		fan_speed_info->min_rpm = hwmgr->thermal_controller.fanInfo.ulMinRPM;
+		fan_speed_info->max_rpm = hwmgr->thermal_controller.fanInfo.ulMaxRPM;
+	} else {
+		fan_speed_info->min_rpm = 0;
+		fan_speed_info->max_rpm = 0;
+	}
+
+	return 0;
+}
+
+int ellesmere_fan_ctrl_get_fan_speed_percent(struct pp_hwmgr *hwmgr,
+		uint32_t *speed)
+{
+	uint32_t duty100;
+	uint32_t duty;
+	uint64_t tmp64;
+
+	if (hwmgr->thermal_controller.fanInfo.bNoFan)
+		return 0;
+
+	duty100 = PHM_READ_VFPF_INDIRECT_FIELD(hwmgr->device, CGS_IND_REG__SMC,
+			CG_FDO_CTRL1, FMAX_DUTY100);
+	duty = PHM_READ_VFPF_INDIRECT_FIELD(hwmgr->device, CGS_IND_REG__SMC,
+			CG_THERMAL_STATUS, FDO_PWM_DUTY);
+
+	if (duty100 == 0)
+		return -EINVAL;
+
+
+	tmp64 = (uint64_t)duty * 100;
+	do_div(tmp64, duty100);
+	*speed = (uint32_t)tmp64;
+
+	if (*speed > 100)
+		*speed = 100;
+
+	return 0;
+}
+
+int ellesmere_fan_ctrl_get_fan_speed_rpm(struct pp_hwmgr *hwmgr, uint32_t *speed)
+{
+	uint32_t tach_period;
+	uint32_t crystal_clock_freq;
+
+	if (hwmgr->thermal_controller.fanInfo.bNoFan ||
+			(hwmgr->thermal_controller.fanInfo.
+				ucTachometerPulsesPerRevolution == 0))
+		return 0;
+
+	tach_period = PHM_READ_VFPF_INDIRECT_FIELD(hwmgr->device, CGS_IND_REG__SMC,
+			CG_TACH_STATUS, TACH_PERIOD);
+
+	if (tach_period == 0)
+		return -EINVAL;
+
+	crystal_clock_freq = tonga_get_xclk(hwmgr);
+
+	*speed = 60 * crystal_clock_freq * 10000 / tach_period;
+
+	return 0;
+}
+
+/**
+* Set Fan Speed Control to static mode, so that the user can decide what speed to use.
+* @param    hwmgr  the address of the powerplay hardware manager.
+*           mode    the fan control mode, 0 default, 1 by percent, 5, by RPM
+* @exception Should always succeed.
+*/
+int ellesmere_fan_ctrl_set_static_mode(struct pp_hwmgr *hwmgr, uint32_t mode)
+{
+
+	if (hwmgr->fan_ctrl_is_in_default_mode) {
+		hwmgr->fan_ctrl_default_mode =
+				PHM_READ_VFPF_INDIRECT_FIELD(hwmgr->device,	CGS_IND_REG__SMC,
+						CG_FDO_CTRL2, FDO_PWM_MODE);
+		hwmgr->tmin =
+				PHM_READ_VFPF_INDIRECT_FIELD(hwmgr->device, CGS_IND_REG__SMC,
+						CG_FDO_CTRL2, TMIN);
+		hwmgr->fan_ctrl_is_in_default_mode = false;
+	}
+
+	PHM_WRITE_VFPF_INDIRECT_FIELD(hwmgr->device, CGS_IND_REG__SMC,
+			CG_FDO_CTRL2, TMIN, 0);
+	PHM_WRITE_VFPF_INDIRECT_FIELD(hwmgr->device, CGS_IND_REG__SMC,
+			CG_FDO_CTRL2, FDO_PWM_MODE, mode);
+
+	return 0;
+}
+
+/**
+* Reset Fan Speed Control to default mode.
+* @param    hwmgr  the address of the powerplay hardware manager.
+* @exception Should always succeed.
+*/
+int ellesmere_fan_ctrl_set_default_mode(struct pp_hwmgr *hwmgr)
+{
+	if (!hwmgr->fan_ctrl_is_in_default_mode) {
+		PHM_WRITE_VFPF_INDIRECT_FIELD(hwmgr->device, CGS_IND_REG__SMC,
+				CG_FDO_CTRL2, FDO_PWM_MODE, hwmgr->fan_ctrl_default_mode);
+		PHM_WRITE_VFPF_INDIRECT_FIELD(hwmgr->device, CGS_IND_REG__SMC,
+				CG_FDO_CTRL2, TMIN, hwmgr->tmin);
+		hwmgr->fan_ctrl_is_in_default_mode = true;
+	}
+
+	return 0;
+}
+
+int ellesmere_fan_ctrl_start_smc_fan_control(struct pp_hwmgr *hwmgr)
+{
+	int result;
+
+	if (phm_cap_enabled(hwmgr->platform_descriptor.platformCaps,
+			PHM_PlatformCaps_ODFuzzyFanControlSupport)) {
+		cgs_write_register(hwmgr->device, mmSMC_MSG_ARG_0, FAN_CONTROL_FUZZY);
+		result = smum_send_msg_to_smc(hwmgr->smumgr, PPSMC_StartFanControl);
+
+		if (phm_cap_enabled(hwmgr->platform_descriptor.platformCaps,
+				PHM_PlatformCaps_FanSpeedInTableIsRPM))
+			hwmgr->hwmgr_func->set_max_fan_rpm_output(hwmgr,
+					hwmgr->thermal_controller.
+					advanceFanControlParameters.usMaxFanRPM);
+		else
+			hwmgr->hwmgr_func->set_max_fan_pwm_output(hwmgr,
+					hwmgr->thermal_controller.
+					advanceFanControlParameters.usMaxFanPWM);
+
+	} else {
+		cgs_write_register(hwmgr->device, mmSMC_MSG_ARG_0, FAN_CONTROL_TABLE);
+		result = smum_send_msg_to_smc(hwmgr->smumgr, PPSMC_StartFanControl);
+	}
+
+	if (!result && hwmgr->thermal_controller.
+			advanceFanControlParameters.ucTargetTemperature)
+		result = smum_send_msg_to_smc_with_parameter(hwmgr->smumgr,
+				PPSMC_MSG_SetFanTemperatureTarget,
+				hwmgr->thermal_controller.
+				advanceFanControlParameters.ucTargetTemperature);
+
+	return result;
+}
+
+
+int ellesmere_fan_ctrl_stop_smc_fan_control(struct pp_hwmgr *hwmgr)
+{
+	return smum_send_msg_to_smc(hwmgr->smumgr, PPSMC_StopFanControl);
+}
+
+/**
+* Set Fan Speed in percent.
+* @param    hwmgr  the address of the powerplay hardware manager.
+* @param    speed is the percentage value (0% - 100%) to be set.
+* @exception Fails is the 100% setting appears to be 0.
+*/
+int ellesmere_fan_ctrl_set_fan_speed_percent(struct pp_hwmgr *hwmgr,
+		uint32_t speed)
+{
+	uint32_t duty100;
+	uint32_t duty;
+	uint64_t tmp64;
+
+	if (hwmgr->thermal_controller.fanInfo.bNoFan)
+		return 0;
+
+	if (speed > 100)
+		speed = 100;
+
+	if (phm_cap_enabled(hwmgr->platform_descriptor.platformCaps,
+			PHM_PlatformCaps_MicrocodeFanControl))
+		ellesmere_fan_ctrl_stop_smc_fan_control(hwmgr);
+
+	duty100 = PHM_READ_VFPF_INDIRECT_FIELD(hwmgr->device, CGS_IND_REG__SMC,
+			CG_FDO_CTRL1, FMAX_DUTY100);
+
+	if (duty100 == 0)
+		return -EINVAL;
+
+	tmp64 = (uint64_t)speed * 100;
+	do_div(tmp64, duty100);
+	duty = (uint32_t)tmp64;
+
+	PHM_WRITE_VFPF_INDIRECT_FIELD(hwmgr->device, CGS_IND_REG__SMC,
+			CG_FDO_CTRL0, FDO_STATIC_DUTY, duty);
+
+	return ellesmere_fan_ctrl_set_static_mode(hwmgr, FDO_PWM_MODE_STATIC);
+}
+
+/**
+* Reset Fan Speed to default.
+* @param    hwmgr  the address of the powerplay hardware manager.
+* @exception Always succeeds.
+*/
+int ellesmere_fan_ctrl_reset_fan_speed_to_default(struct pp_hwmgr *hwmgr)
+{
+	int result;
+
+	if (hwmgr->thermal_controller.fanInfo.bNoFan)
+		return 0;
+
+	if (phm_cap_enabled(hwmgr->platform_descriptor.platformCaps,
+			PHM_PlatformCaps_MicrocodeFanControl)) {
+		result = ellesmere_fan_ctrl_set_static_mode(hwmgr, FDO_PWM_MODE_STATIC);
+		if (!result)
+			result = ellesmere_fan_ctrl_start_smc_fan_control(hwmgr);
+	} else
+		result = ellesmere_fan_ctrl_set_default_mode(hwmgr);
+
+	return result;
+}
+
+/**
+* Set Fan Speed in RPM.
+* @param    hwmgr  the address of the powerplay hardware manager.
+* @param    speed is the percentage value (min - max) to be set.
+* @exception Fails is the speed not lie between min and max.
+*/
+int ellesmere_fan_ctrl_set_fan_speed_rpm(struct pp_hwmgr *hwmgr, uint32_t speed)
+{
+	uint32_t tach_period;
+	uint32_t crystal_clock_freq;
+
+	if (hwmgr->thermal_controller.fanInfo.bNoFan ||
+			(hwmgr->thermal_controller.fanInfo.
+			ucTachometerPulsesPerRevolution == 0) ||
+			(speed < hwmgr->thermal_controller.fanInfo.ulMinRPM) ||
+			(speed > hwmgr->thermal_controller.fanInfo.ulMaxRPM))
+		return 0;
+
+	if (phm_cap_enabled(hwmgr->platform_descriptor.platformCaps,
+			PHM_PlatformCaps_MicrocodeFanControl))
+		ellesmere_fan_ctrl_stop_smc_fan_control(hwmgr);
+
+	crystal_clock_freq = tonga_get_xclk(hwmgr);
+
+	tach_period = 60 * crystal_clock_freq * 10000 / (8 * speed);
+
+	PHM_WRITE_VFPF_INDIRECT_FIELD(hwmgr->device, CGS_IND_REG__SMC,
+				CG_TACH_STATUS, TACH_PERIOD, tach_period);
+
+	return ellesmere_fan_ctrl_set_static_mode(hwmgr, FDO_PWM_MODE_STATIC);
+}
+
+/**
+* Reads the remote temperature from the SIslands thermal controller.
+*
+* @param    hwmgr The address of the hardware manager.
+*/
+int ellesmere_thermal_get_temperature(struct pp_hwmgr *hwmgr)
+{
+	int temp;
+
+	temp = PHM_READ_VFPF_INDIRECT_FIELD(hwmgr->device, CGS_IND_REG__SMC,
+			CG_MULT_THERMAL_STATUS, CTF_TEMP);
+
+	/* Bit 9 means the reading is lower than the lowest usable value. */
+	if (temp & 0x200)
+		temp = ELLESMERE_THERMAL_MAXIMUM_TEMP_READING;
+	else
+		temp = temp & 0x1ff;
+
+	temp *= PP_TEMPERATURE_UNITS_PER_CENTIGRADES;
+
+	return temp;
+}
+
+/**
+* Set the requested temperature range for high and low alert signals
+*
+* @param    hwmgr The address of the hardware manager.
+* @param    range Temperature range to be programmed for high and low alert signals
+* @exception PP_Result_BadInput if the input data is not valid.
+*/
+static int ellesmere_thermal_set_temperature_range(struct pp_hwmgr *hwmgr,
+		uint32_t low_temp, uint32_t high_temp)
+{
+	uint32_t low = ELLESMERE_THERMAL_MINIMUM_ALERT_TEMP *
+			PP_TEMPERATURE_UNITS_PER_CENTIGRADES;
+	uint32_t high = ELLESMERE_THERMAL_MAXIMUM_ALERT_TEMP *
+			PP_TEMPERATURE_UNITS_PER_CENTIGRADES;
+
+	if (low < low_temp)
+		low = low_temp;
+	if (high > high_temp)
+		high = high_temp;
+
+	if (low > high)
+		return -EINVAL;
+
+	PHM_WRITE_VFPF_INDIRECT_FIELD(hwmgr->device, CGS_IND_REG__SMC,
+			CG_THERMAL_INT, DIG_THERM_INTH,
+			(high / PP_TEMPERATURE_UNITS_PER_CENTIGRADES));
+	PHM_WRITE_VFPF_INDIRECT_FIELD(hwmgr->device, CGS_IND_REG__SMC,
+			CG_THERMAL_INT, DIG_THERM_INTL,
+			(low / PP_TEMPERATURE_UNITS_PER_CENTIGRADES));
+	PHM_WRITE_VFPF_INDIRECT_FIELD(hwmgr->device, CGS_IND_REG__SMC,
+			CG_THERMAL_CTRL, DIG_THERM_DPM,
+			(high / PP_TEMPERATURE_UNITS_PER_CENTIGRADES));
+
+	return 0;
+}
+
+/**
+* Programs thermal controller one-time setting registers
+*
+* @param    hwmgr The address of the hardware manager.
+*/
+static int ellesmere_thermal_initialize(struct pp_hwmgr *hwmgr)
+{
+	if (hwmgr->thermal_controller.fanInfo.ucTachometerPulsesPerRevolution)
+		PHM_WRITE_VFPF_INDIRECT_FIELD(hwmgr->device, CGS_IND_REG__SMC,
+				CG_TACH_CTRL, EDGE_PER_REV,
+				hwmgr->thermal_controller.fanInfo.
+				ucTachometerPulsesPerRevolution - 1);
+
+	PHM_WRITE_VFPF_INDIRECT_FIELD(hwmgr->device, CGS_IND_REG__SMC,
+			CG_FDO_CTRL2, TACH_PWM_RESP_RATE, 0x28);
+
+	return 0;
+}
+
+/**
+* Enable thermal alerts on the RV770 thermal controller.
+*
+* @param    hwmgr The address of the hardware manager.
+*/
+static int ellesmere_thermal_enable_alert(struct pp_hwmgr *hwmgr)
+{
+	uint32_t alert;
+
+	alert = PHM_READ_VFPF_INDIRECT_FIELD(hwmgr->device, CGS_IND_REG__SMC,
+			CG_THERMAL_INT, THERM_INT_MASK);
+	alert &= ~(ELLESMERE_THERMAL_HIGH_ALERT_MASK | ELLESMERE_THERMAL_LOW_ALERT_MASK);
+	PHM_WRITE_VFPF_INDIRECT_FIELD(hwmgr->device, CGS_IND_REG__SMC,
+			CG_THERMAL_INT, THERM_INT_MASK, alert);
+
+	/* send message to SMU to enable internal thermal interrupts */
+	return smum_send_msg_to_smc(hwmgr->smumgr, PPSMC_MSG_Thermal_Cntl_Enable);
+}
+
+/**
+* Disable thermal alerts on the RV770 thermal controller.
+* @param    hwmgr The address of the hardware manager.
+*/
+static int ellesmere_thermal_disable_alert(struct pp_hwmgr *hwmgr)
+{
+	uint32_t alert;
+
+	alert = PHM_READ_VFPF_INDIRECT_FIELD(hwmgr->device, CGS_IND_REG__SMC,
+			CG_THERMAL_INT, THERM_INT_MASK);
+	alert |= (ELLESMERE_THERMAL_HIGH_ALERT_MASK | ELLESMERE_THERMAL_LOW_ALERT_MASK);
+	PHM_WRITE_VFPF_INDIRECT_FIELD(hwmgr->device, CGS_IND_REG__SMC,
+			CG_THERMAL_INT, THERM_INT_MASK, alert);
+
+	/* send message to SMU to disable internal thermal interrupts */
+	return smum_send_msg_to_smc(hwmgr->smumgr, PPSMC_MSG_Thermal_Cntl_Disable);
+}
+
+/**
+* Uninitialize the thermal controller.
+* Currently just disables alerts.
+* @param    hwmgr The address of the hardware manager.
+*/
+int ellesmere_thermal_stop_thermal_controller(struct pp_hwmgr *hwmgr)
+{
+	int result = ellesmere_thermal_disable_alert(hwmgr);
+
+	if (!hwmgr->thermal_controller.fanInfo.bNoFan)
+		ellesmere_fan_ctrl_set_default_mode(hwmgr);
+
+	return result;
+}
+
+/**
+* Set up the fan table to control the fan using the SMC.
+* @param    hwmgr  the address of the powerplay hardware manager.
+* @param    pInput the pointer to input data
+* @param    pOutput the pointer to output data
+* @param    pStorage the pointer to temporary storage
+* @param    Result the last failure code
+* @return   result from set temperature range routine
+*/
+int tf_ellesmere_thermal_setup_fan_table(struct pp_hwmgr *hwmgr,
+		void *input, void *output, void *storage, int result)
+{
+	struct ellesmere_hwmgr *data = (struct ellesmere_hwmgr *)(hwmgr->backend);
+	SMU74_Discrete_FanTable fan_table = { FDO_MODE_HARDWARE };
+	uint32_t duty100;
+	uint32_t t_diff1, t_diff2, pwm_diff1, pwm_diff2;
+	uint16_t fdo_min, slope1, slope2;
+	uint32_t reference_clock;
+	int res;
+	uint64_t tmp64;
+
+	if (data->fan_table_start == 0) {
+		phm_cap_unset(hwmgr->platform_descriptor.platformCaps,
+				PHM_PlatformCaps_MicrocodeFanControl);
+		return 0;
+	}
+
+	duty100 = PHM_READ_VFPF_INDIRECT_FIELD(hwmgr->device, CGS_IND_REG__SMC,
+			CG_FDO_CTRL1, FMAX_DUTY100);
+
+	if (duty100 == 0) {
+		phm_cap_unset(hwmgr->platform_descriptor.platformCaps,
+				PHM_PlatformCaps_MicrocodeFanControl);
+		return 0;
+	}
+
+	tmp64 = hwmgr->thermal_controller.advanceFanControlParameters.
+			usPWMMin * duty100;
+	do_div(tmp64, 10000);
+	fdo_min = (uint16_t)tmp64;
+
+	t_diff1 = hwmgr->thermal_controller.advanceFanControlParameters.usTMed -
+			hwmgr->thermal_controller.advanceFanControlParameters.usTMin;
+	t_diff2 = hwmgr->thermal_controller.advanceFanControlParameters.usTHigh -
+			hwmgr->thermal_controller.advanceFanControlParameters.usTMed;
+
+	pwm_diff1 = hwmgr->thermal_controller.advanceFanControlParameters.usPWMMed -
+			hwmgr->thermal_controller.advanceFanControlParameters.usPWMMin;
+	pwm_diff2 = hwmgr->thermal_controller.advanceFanControlParameters.usPWMHigh -
+			hwmgr->thermal_controller.advanceFanControlParameters.usPWMMed;
+
+	slope1 = (uint16_t)((50 + ((16 * duty100 * pwm_diff1) / t_diff1)) / 100);
+	slope2 = (uint16_t)((50 + ((16 * duty100 * pwm_diff2) / t_diff2)) / 100);
+
+	fan_table.TempMin = cpu_to_be16((50 + hwmgr->
+			thermal_controller.advanceFanControlParameters.usTMin) / 100);
+	fan_table.TempMed = cpu_to_be16((50 + hwmgr->
+			thermal_controller.advanceFanControlParameters.usTMed) / 100);
+	fan_table.TempMax = cpu_to_be16((50 + hwmgr->
+			thermal_controller.advanceFanControlParameters.usTMax) / 100);
+
+	fan_table.Slope1 = cpu_to_be16(slope1);
+	fan_table.Slope2 = cpu_to_be16(slope2);
+
+	fan_table.FdoMin = cpu_to_be16(fdo_min);
+
+	fan_table.HystDown = cpu_to_be16(hwmgr->
+			thermal_controller.advanceFanControlParameters.ucTHyst);
+
+	fan_table.HystUp = cpu_to_be16(1);
+
+	fan_table.HystSlope = cpu_to_be16(1);
+
+	fan_table.TempRespLim = cpu_to_be16(5);
+
+	reference_clock = tonga_get_xclk(hwmgr);
+
+	fan_table.RefreshPeriod = cpu_to_be32((hwmgr->
+			thermal_controller.advanceFanControlParameters.ulCycleDelay *
+			reference_clock) / 1600);
+
+	fan_table.FdoMax = cpu_to_be16((uint16_t)duty100);
+
+	fan_table.TempSrc = (uint8_t)PHM_READ_VFPF_INDIRECT_FIELD(
+			hwmgr->device, CGS_IND_REG__SMC,
+			CG_MULT_THERMAL_CTRL, TEMP_SEL);
+
+	res = ellesmere_copy_bytes_to_smc(hwmgr->smumgr, data->fan_table_start,
+			(uint8_t *)&fan_table, (uint32_t)sizeof(fan_table),
+			data->sram_end);
+
+	if (!res && hwmgr->thermal_controller.
+			advanceFanControlParameters.ucMinimumPWMLimit)
+		res = smum_send_msg_to_smc_with_parameter(hwmgr->smumgr,
+				PPSMC_MSG_SetFanMinPwm,
+				hwmgr->thermal_controller.
+				advanceFanControlParameters.ucMinimumPWMLimit);
+
+	if (!res && hwmgr->thermal_controller.
+			advanceFanControlParameters.ulMinFanSCLKAcousticLimit)
+		res = smum_send_msg_to_smc_with_parameter(hwmgr->smumgr,
+				PPSMC_MSG_SetFanSclkTarget,
+				hwmgr->thermal_controller.
+				advanceFanControlParameters.ulMinFanSCLKAcousticLimit);
+
+	if (res)
+		phm_cap_unset(hwmgr->platform_descriptor.platformCaps,
+				PHM_PlatformCaps_MicrocodeFanControl);
+
+	return 0;
+}
+
+/**
+* Start the fan control on the SMC.
+* @param    hwmgr  the address of the powerplay hardware manager.
+* @param    pInput the pointer to input data
+* @param    pOutput the pointer to output data
+* @param    pStorage the pointer to temporary storage
+* @param    Result the last failure code
+* @return   result from set temperature range routine
+*/
+int tf_ellesmere_thermal_start_smc_fan_control(struct pp_hwmgr *hwmgr,
+		void *input, void *output, void *storage, int result)
+{
+/* If the fantable setup has failed we could have disabled
+ * PHM_PlatformCaps_MicrocodeFanControl even after
+ * this function was included in the table.
+ * Make sure that we still think controlling the fan is OK.
+*/
+	if (phm_cap_enabled(hwmgr->platform_descriptor.platformCaps,
+			PHM_PlatformCaps_MicrocodeFanControl)) {
+		ellesmere_fan_ctrl_start_smc_fan_control(hwmgr);
+		ellesmere_fan_ctrl_set_static_mode(hwmgr, FDO_PWM_MODE_STATIC);
+	}
+
+	return 0;
+}
+
+/**
+* Set temperature range for high and low alerts
+* @param    hwmgr  the address of the powerplay hardware manager.
+* @param    pInput the pointer to input data
+* @param    pOutput the pointer to output data
+* @param    pStorage the pointer to temporary storage
+* @param    Result the last failure code
+* @return   result from set temperature range routine
+*/
+int tf_ellesmere_thermal_set_temperature_range(struct pp_hwmgr *hwmgr,
+		void *input, void *output, void *storage, int result)
+{
+	struct PP_TemperatureRange *range = (struct PP_TemperatureRange *)input;
+
+	if (range == NULL)
+		return -EINVAL;
+
+	return ellesmere_thermal_set_temperature_range(hwmgr, range->min, range->max);
+}
+
+/**
+* Programs one-time setting registers
+* @param    hwmgr  the address of the powerplay hardware manager.
+* @param    pInput the pointer to input data
+* @param    pOutput the pointer to output data
+* @param    pStorage the pointer to temporary storage
+* @param    Result the last failure code
+* @return   result from initialize thermal controller routine
+*/
+int tf_ellesmere_thermal_initialize(struct pp_hwmgr *hwmgr,
+		void *input, void *output, void *storage, int result)
+{
+    return ellesmere_thermal_initialize(hwmgr);
+}
+
+/**
+* Enable high and low alerts
+* @param    hwmgr  the address of the powerplay hardware manager.
+* @param    pInput the pointer to input data
+* @param    pOutput the pointer to output data
+* @param    pStorage the pointer to temporary storage
+* @param    Result the last failure code
+* @return   result from enable alert routine
+*/
+int tf_ellesmere_thermal_enable_alert(struct pp_hwmgr *hwmgr,
+		void *input, void *output, void *storage, int result)
+{
+	return ellesmere_thermal_enable_alert(hwmgr);
+}
+
+/**
+* Disable high and low alerts
+* @param    hwmgr  the address of the powerplay hardware manager.
+* @param    pInput the pointer to input data
+* @param    pOutput the pointer to output data
+* @param    pStorage the pointer to temporary storage
+* @param    Result the last failure code
+* @return   result from disable alert routine
+*/
+static int tf_ellesmere_thermal_disable_alert(struct pp_hwmgr *hwmgr,
+		void *input, void *output, void *storage, int result)
+{
+	return ellesmere_thermal_disable_alert(hwmgr);
+}
+
+static int tf_ellesmere_thermal_avfs_enable(struct pp_hwmgr *hwmgr,
+		void *input, void *output, void *storage, int result)
+{
+	int ret;
+	struct pp_smumgr *smumgr = (struct pp_smumgr *)(hwmgr->smumgr);
+	struct ellesmere_smumgr *smu_data = (struct ellesmere_smumgr *)(smumgr->backend);
+
+	if (smu_data->avfs.avfs_btc_status != AVFS_BTC_ENABLEAVFS)
+		return 0;
+
+	ret = (smum_send_msg_to_smc(smumgr, PPSMC_MSG_EnableAvfs) == 0) ?
+			0 : -1;
+
+	if (!ret)
+		/* If this param is not changed, this function could fire unnecessarily */
+		smu_data->avfs.avfs_btc_status = AVFS_BTC_COMPLETED_PREVIOUSLY;
+
+	return ret;
+}
+
+static struct phm_master_table_item
+ellesmere_thermal_start_thermal_controller_master_list[] = {
+	{NULL, tf_ellesmere_thermal_initialize},
+	{NULL, tf_ellesmere_thermal_set_temperature_range},
+	{NULL, tf_ellesmere_thermal_enable_alert},
+	{NULL, tf_ellesmere_thermal_avfs_enable},
+/* We should restrict performance levels to low before we halt the SMC.
+ * On the other hand we are still in boot state when we do this
+ * so it would be pointless.
+ * If this assumption changes we have to revisit this table.
+ */
+	{NULL, tf_ellesmere_thermal_setup_fan_table},
+	{NULL, tf_ellesmere_thermal_start_smc_fan_control},
+	{NULL, NULL}
+};
+
+static struct phm_master_table_header
+ellesmere_thermal_start_thermal_controller_master = {
+	0,
+	PHM_MasterTableFlag_None,
+	ellesmere_thermal_start_thermal_controller_master_list
+};
+
+static struct phm_master_table_item
+ellesmere_thermal_set_temperature_range_master_list[] = {
+	{NULL, tf_ellesmere_thermal_disable_alert},
+	{NULL, tf_ellesmere_thermal_set_temperature_range},
+	{NULL, tf_ellesmere_thermal_enable_alert},
+	{NULL, NULL}
+};
+
+struct phm_master_table_header
+ellesmere_thermal_set_temperature_range_master = {
+	0,
+	PHM_MasterTableFlag_None,
+	ellesmere_thermal_set_temperature_range_master_list
+};
+
+int ellesmere_thermal_ctrl_uninitialize_thermal_controller(struct pp_hwmgr *hwmgr)
+{
+	if (!hwmgr->thermal_controller.fanInfo.bNoFan)
+		ellesmere_fan_ctrl_set_default_mode(hwmgr);
+	return 0;
+}
+
+/**
+* Initializes the thermal controller related functions in the Hardware Manager structure.
+* @param    hwmgr The address of the hardware manager.
+* @exception Any error code from the low-level communication.
+*/
+int pp_ellesmere_thermal_initialize(struct pp_hwmgr *hwmgr)
+{
+	int result;
+
+	result = phm_construct_table(hwmgr,
+			&ellesmere_thermal_set_temperature_range_master,
+			&(hwmgr->set_temperature_range));
+
+	if (!result) {
+		result = phm_construct_table(hwmgr,
+				&ellesmere_thermal_start_thermal_controller_master,
+				&(hwmgr->start_thermal_controller));
+		if (result)
+			phm_destroy_table(hwmgr, &(hwmgr->set_temperature_range));
+	}
+
+	if (!result)
+		hwmgr->fan_ctrl_is_in_default_mode = true;
+	return result;
+}
+
diff --git a/drivers/gpu/drm/amd/powerplay/hwmgr/ellesmere_thermal.h b/drivers/gpu/drm/amd/powerplay/hwmgr/ellesmere_thermal.h
new file mode 100644
index 0000000..4263e9b
--- /dev/null
+++ b/drivers/gpu/drm/amd/powerplay/hwmgr/ellesmere_thermal.h
@@ -0,0 +1,62 @@
+/*
+ * Copyright 2016 Advanced Micro Devices, Inc.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
+ * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR
+ * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+ * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ *
+ */
+
+#ifndef _ELLESMERE_THERMAL_H_
+#define _ELLESMERE_THERMAL_H_
+
+#include "hwmgr.h"
+
+#define ELLESMERE_THERMAL_HIGH_ALERT_MASK         0x1
+#define ELLESMERE_THERMAL_LOW_ALERT_MASK          0x2
+
+#define ELLESMERE_THERMAL_MINIMUM_TEMP_READING    -256
+#define ELLESMERE_THERMAL_MAXIMUM_TEMP_READING    255
+
+#define ELLESMERE_THERMAL_MINIMUM_ALERT_TEMP      0
+#define ELLESMERE_THERMAL_MAXIMUM_ALERT_TEMP      255
+
+#define FDO_PWM_MODE_STATIC  1
+#define FDO_PWM_MODE_STATIC_RPM 5
+
+
+extern int tf_ellesmere_thermal_initialize(struct pp_hwmgr *hwmgr, void *input, void *output, void *storage, int result);
+extern int tf_ellesmere_thermal_set_temperature_range(struct pp_hwmgr *hwmgr, void *input, void *output, void *storage, int result);
+extern int tf_ellesmere_thermal_enable_alert(struct pp_hwmgr *hwmgr, void *input, void *output, void *storage, int result);
+
+extern int ellesmere_thermal_get_temperature(struct pp_hwmgr *hwmgr);
+extern int ellesmere_thermal_stop_thermal_controller(struct pp_hwmgr *hwmgr);
+extern int ellesmere_fan_ctrl_get_fan_speed_info(struct pp_hwmgr *hwmgr, struct phm_fan_speed_info *fan_speed_info);
+extern int ellesmere_fan_ctrl_get_fan_speed_percent(struct pp_hwmgr *hwmgr, uint32_t *speed);
+extern int ellesmere_fan_ctrl_set_default_mode(struct pp_hwmgr *hwmgr);
+extern int ellesmere_fan_ctrl_set_static_mode(struct pp_hwmgr *hwmgr, uint32_t mode);
+extern int ellesmere_fan_ctrl_set_fan_speed_percent(struct pp_hwmgr *hwmgr, uint32_t speed);
+extern int ellesmere_fan_ctrl_reset_fan_speed_to_default(struct pp_hwmgr *hwmgr);
+extern int pp_ellesmere_thermal_initialize(struct pp_hwmgr *hwmgr);
+extern int ellesmere_thermal_ctrl_uninitialize_thermal_controller(struct pp_hwmgr *hwmgr);
+extern int ellesmere_fan_ctrl_set_fan_speed_rpm(struct pp_hwmgr *hwmgr, uint32_t speed);
+extern int ellesmere_fan_ctrl_get_fan_speed_rpm(struct pp_hwmgr *hwmgr, uint32_t *speed);
+extern int ellesmere_fan_ctrl_stop_smc_fan_control(struct pp_hwmgr *hwmgr);
+extern uint32_t tonga_get_xclk(struct pp_hwmgr *hwmgr);
+
+#endif
+
-- 
2.5.0

_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel




[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux