On 15 March 2016 at 02:30, Mark yao <mark.yao@xxxxxxxxxxxxxx> wrote:
> On 2016年03月14日 21:35, Tomeu Vizoso wrote:
>>
>> On 2 December 2014 at 10:15, Mark Yao <mark.yao@xxxxxxxxxxxxxx> wrote:
>>>
>>> diff --git a/drivers/gpu/drm/rockchip/rockchip_drm_vop.c
>>> b/drivers/gpu/drm/rockchip/rockchip_drm_vop.c
>>> new file mode 100644
>>> index 0000000..e7ca25b
>>> --- /dev/null
>>> +++ b/drivers/gpu/drm/rockchip/rockchip_drm_vop.c
>>> @@ -0,0 +1,1455 @@
>>
>> ...
>>>
>>> +static bool vop_crtc_mode_fixup(struct drm_crtc *crtc,
>>> + const struct drm_display_mode *mode,
>>> + struct drm_display_mode *adjusted_mode)
>>> +{
>>> + if (adjusted_mode->htotal == 0 || adjusted_mode->vtotal == 0)
>>> + return false;
>>
>> Hi Mark,
>>
>> what's the rationale for this?
>>
>> Disabling a CRTC as in [0] will cause mode_fixup() to be called with
>> an empty mode, failing that test.
>>
>> Removing the check seems to get things working fine for a short while,
>> but a later modeset invariably gets the VOP to hang (as reported by
>> [1]).
>>
>> Do you know why that check was put in place and what exactly could be
>> causing the hw to hang?
>>
>> [0]
>> https://cgit.freedesktop.org/xorg/app/intel-gpu-tools/tree/lib/igt_kms.c#n1616
>> [1]
>> https://git.kernel.org/cgit/linux/kernel/git/next/linux-next.git/tree/drivers/gpu/drm/rockchip/rockchip_drm_vop.c#n873
>>
>> Thanks,
>>
>> Tomeu
>>
> Hi Tomeu
>
> Just thinking that "adjusted_mode->htotal == 0 || adjusted_mode->vtotal ==
> 0" is not a good mode for vop.
Ah, ok. Guess it should be removed then so we don't break userspace?
> And you said VOP hang, only WARN_ON error message? or system hang, die?
Sorry, the symptom was only the warning, I just went a bit too far and
assumed the VOP had stopped working at all.
> I think maybe crtc disable too fast, vblank is off, then no one can feed the
> wait_update_complete.
> Can you test it again with following patch?
Actually, in today's testing I don't see that happening any more,
sorry about that :/
What I have been looking at today is a related issue when running the
kms_flip_event_leak test from intel-gpu-tools. If I remove the check
mentioned above so CRTCs can be disabled with the SetCRTC IOCTL, I see
this page fault the second and subsequent times I run the test.
[ 75.809031] rk_iommu ff930300.iommu: Page fault at 0x01000000 of type read
[ 75.809035] rk_iommu ff930300.iommu: iova = 0x01000000: dte_index:
0x4 pte_index: 0x0 page_offset: 0x0
[ 75.809040] rk_iommu ff930300.iommu: mmu_dte_addr: 0x2c258000
dte@0x2c258010: 0x2c561001 valid: 1 pte@0x2c561000: 0x2a000006 valid:
0 page@0x00000000 flags: 0x0
[ 76.951288] rk_iommu ff930300.iommu: Enable stall request timed
out, status: 0x00004b
I have written a smaller standalone test that is attached in case you
want to check it out, but I haven't been able to find out why it only
happens when the test is rerun.
Apparently the VOP is still trying to read a BO (0x01000000) right
when the kernel frees it, but from what I can see, it should be
scanning another BO at that point.
Do you have any ideas on what could be happening?
Thanks,
Tomeu
> drivers/gpu/drm/rockchip/rockchip_drm_vop.c
> @@ -503,6 +503,8 @@ static void vop_crtc_disable(struct drm_crtc *crtc)
> if (!vop->is_enabled)
> return;
> + vop_crtc_wait_for_update(crtc);
> +
> drm_crtc_vblank_off(crtc);
>
> Thanks.
>
> --
> Ｍark Yao
>
>
#include <fcntl.h>
#include <sys/stat.h>
#include <unistd.h>
#include <string.h>
#include <stdio.h>
#include <drm.h>
#include <drm_fourcc.h>
#include <xf86drm.h>
#include <xf86drmMode.h>
__attribute__((format(printf, 1, 2)))
static void kmsg(const char *format, ...)
#define KERN_EMER "<0>"
#define KERN_ALERT "<1>"
#define KERN_CRIT "<2>"
#define KERN_ERR "<3>"
#define KERN_WARNING "<4>"
#define KERN_NOTICE "<5>"
#define KERN_INFO "<6>"
#define KERN_DEBUG "<7>"
{
va_list ap;
FILE *file;
file = fopen("/dev/kmsg", "w");
if (file == NULL)
return;
va_start(ap, format);
fprintf(file, "userspace: ");
vfprintf(file, format, ap);
va_end(ap);
fclose(file);
}
static uint32_t dumb_create(int fd, int width, int height, int bpp)
{
struct drm_mode_create_dumb create = {};
create.width = width;
create.height = height;
create.bpp = bpp;
create.handle = 0;
drmIoctl(fd, DRM_IOCTL_MODE_CREATE_DUMB, &create);
return create.handle;
}
static uint32_t fb_create(int fd, int width, int height, int format, int bo, int pitch)
{
struct drm_mode_fb_cmd2 f = {};
f.width = width;
f.height = height;
f.pixel_format = format;
f.handles[0] = bo;
f.pitches[0] = pitch;
f.fb_id = 0;
drmIoctl(fd, DRM_IOCTL_MODE_ADDFB2, &f);
return f.fb_id;
}
drmModeModeInfo *connector_get_default_mode(int fd, int conn_id)
{
drmModeConnectorPtr conn;
int i;
conn = drmModeGetConnectorCurrent(fd, conn_id);
for (i = 0; i < conn->count_modes; i++) {
if (conn->modes[i].type & DRM_MODE_TYPE_PREFERRED)
return &conn->modes[i];
}
}
static int dumb_destroy(int fd, uint32_t bo)
{
struct drm_mode_destroy_dumb arg = {};
arg.handle = bo;
return drmIoctl(fd, DRM_IOCTL_MODE_DESTROY_DUMB, &arg);
}
void test_pipe(int fd, int pipe, int conn, int crtc)
{
int ret, bo1, fb1, bo2, fb2;
drmModeModeInfo *mode;
drmVBlank wait_vbl = {};
kmsg("%s: pipe %d conn %d crtc %d\n", __func__, pipe, conn, crtc);
bo1 = dumb_create(fd, 1920, 1080, 4 * 8);
kmsg("dumb_create: %d\n", bo1);
fb1 = fb_create(fd, 1920, 1080, DRM_FORMAT_XRGB8888, bo1, 1920 * 4);
kmsg("fb_create: %d\n", fb1);
mode = connector_get_default_mode(fd, conn);
kmsg("connector_get_default_mode: %s\n", mode->name);
ret = drmModeSetCrtc(fd,
crtc,
fb1,
0, 0, /* x, y */
&conn, /* connectors */
1, /* n_connectors */
mode /* mode */);
kmsg("drmModeSetCrtc: %d\n", ret);
wait_vbl.request.type = pipe << DRM_VBLANK_HIGH_CRTC_SHIFT |
DRM_VBLANK_RELATIVE;
wait_vbl.request.sequence = 1;
ret = drmWaitVBlank(fd, &wait_vbl);
kmsg("drmWaitVBlank: %d\n", ret);
bo2 = dumb_create(fd, 1920, 1080, 4 * 8);
kmsg("dumb_create: %d\n", bo2);
fb2 = fb_create(fd, 1920, 1080, DRM_FORMAT_XRGB8888, bo2, 1920 * 4);
kmsg("fb_create: %d\n", fb2);
ret = drmModePageFlip(fd, crtc, fb2, DRM_MODE_PAGE_FLIP_EVENT, NULL);
kmsg("drmModePageFlip: %d\n", ret);
ret = dumb_destroy(fd, bo2);
kmsg("dumb_destroy: %d\n", ret);
ret = drmModeRmFB(fd, fb2);
kmsg("drmModeRmFB: %d\n", ret);
ret = dumb_destroy(fd, bo1);
kmsg("dumb_destroy: %d\n", ret);
ret = drmModeRmFB(fd, fb1);
kmsg("drmModeRmFB: %d\n", ret);
}
int main(int argc, char **argv)
{
int ret;
int fd = open("/dev/dri/card0", O_RDWR);
ret = drmSetMaster(fd);
test_pipe(fd, 0, 29, 20);
test_pipe(fd, 1, 29, 25);
ret = drmDropMaster(fd);
close(fd);
return 0;
}
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel
