Re: [PATCH] drm/i915: Fix race condition in intel_dp_destroy_mst_connector()

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, Mar 16, 2016 at 03:44:37PM -0400, Lyude Paul wrote:
> On Wed, 2016-03-16 at 21:39 +0200, Ville Syrjälä wrote:
> > On Wed, Mar 16, 2016 at 03:18:04PM -0400, Lyude wrote:
> > > 
> > > After unplugging a DP MST display from the system, we have to go through
> > > and destroy all of the DRM connectors associated with it since none of
> > > them are valid anymore. Unfortunately, intel_dp_destroy_mst_connector()
> > > doesn't do a good enough job of ensuring that throughout the destruction
> > > process that no modesettings can be done with the connectors. As it is
> > > right now, intel_dp_destroy_mst_connector() works like this:
> > > 
> > > * Take all modeset locks
> > > * Clear the configuration of the crtc on the connector, if there is one
> > > * Drop all modeset locks, this is required because of circular
> > >   dependency issues that arise with trying to remove the connector from
> > >   sysfs with modeset locks held
> > > * Unregister the connector
> > > * Take all modeset locks, again
> > > * Do the rest of the required cleaning for destroying the connector
> > > * Finally drop all modeset locks for good
> > So pretty much what I suspected
> > https://lists.freedesktop.org/archives/intel-gfx/2016-February/087734.html
> > 
> > > 
> > > 
> > > This only works sometimes. During the destruction process, it's very
> > > possible that a userspace application will attempt to do a modesetting
> > > using the connector. When we drop the modeset locks, an ioctl handler
> > > such as drm_mode_setcrtc has the oppurtunity to take all of the modeset
> > > locks from us. When this happens, one thing leads to another and
> > > eventually we end up committing a mode with the non-existent connector:
> > > 
> > > 	[drm:intel_dp_link_training_clock_recovery [i915]] *ERROR* failed to
> > > enable link training
> > > 	[drm:intel_dp_aux_ch] dp_aux_ch timeout status 0x7cf0001f
> > > 	[drm:intel_dp_start_link_train [i915]] *ERROR* failed to start channel
> > > equalization
> > > 	[drm:intel_dp_aux_ch] dp_aux_ch timeout status 0x7cf0001f
> > > 	[drm:intel_mst_pre_enable_dp [i915]] *ERROR* failed to allocate vcpi
> > > 
> > > And in some cases, such as with the T460s using an MST dock, this
> > > results in breaking modesetting and/or panicking the system.
> > Are these just kernel oopses etc.? If the hardware gets upset from
> > modesetting when the sink is gone, well, then we still have a problem
> > because the user can of course yank the cable while the modeset is already
> > underway.
> It is more then that. Unfortunately though, fixing that part is not as easy. We
> never expect an atomic modesetting commit to fail, but unfortunately any code
> having to do with turning on DP MST has the chance of failing and we turn on DP
> MST during commits. So fixing that would take moving quite a bit of code around.

SST has the same problems really. The sink may be gone so link training
etc. just won't succeed. But we should still finish the modeset without
killing the system or something.

> 
> > 
> > > 
> > > 
> > > To work around this, we now unregister the connector at the very
> > > beginning of intel_dp_destroy_mst_connector(), grab all the modesetting
> > > locks, and then hold them until we finish the rest of the function.
> > > 
> > > CC: stable@xxxxxxxxxxxxxxx
> > > Signed-off-by: Lyude <cpaul@xxxxxxxxxx>
> > > Signed-off-by: Rob Clark <rclark@xxxxxxxxxx>
> > These sobs don't make much sense to me.
> I should have mentioned that Rob Clark was the one who came up with the idea of
> just moving the connector->unregister() call to the top of the function.
> 
> > 
> > Patch itself does make sense to me, so 
> > Reviewed-by: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
> > 
> > > 
> > > ---
> > >  drivers/gpu/drm/i915/intel_dp_mst.c | 6 ++----
> > >  1 file changed, 2 insertions(+), 4 deletions(-)
> > > 
> > > diff --git a/drivers/gpu/drm/i915/intel_dp_mst.c
> > > b/drivers/gpu/drm/i915/intel_dp_mst.c
> > > index fa0dabf..b21ac88 100644
> > > --- a/drivers/gpu/drm/i915/intel_dp_mst.c
> > > +++ b/drivers/gpu/drm/i915/intel_dp_mst.c
> > > @@ -499,6 +499,8 @@ static void intel_dp_destroy_mst_connector(struct
> > > drm_dp_mst_topology_mgr *mgr,
> > >  	struct intel_connector *intel_connector =
> > > to_intel_connector(connector);
> > >  	struct drm_device *dev = connector->dev;
> > >  
> > > +	intel_connector->unregister(intel_connector);
> > > +
> > >  	/* need to nuke the connector */
> > >  	drm_modeset_lock_all(dev);
> > >  	if (connector->state->crtc) {
> > > @@ -512,11 +514,7 @@ static void intel_dp_destroy_mst_connector(struct
> > > drm_dp_mst_topology_mgr *mgr,
> > >  
> > >  		WARN(ret, "Disabling mst crtc failed with %i\n", ret);
> > >  	}
> > > -	drm_modeset_unlock_all(dev);
> > >  
> > > -	intel_connector->unregister(intel_connector);
> > > -
> > > -	drm_modeset_lock_all(dev);
> > >  	intel_connector_remove_from_fbdev(intel_connector);
> > >  	drm_connector_cleanup(connector);
> > >  	drm_modeset_unlock_all(dev);
> > > -- 
> > > 2.5.0
> > > 
> > > _______________________________________________
> > > dri-devel mailing list
> > > dri-devel@xxxxxxxxxxxxxxxxxxxxx
> > > https://lists.freedesktop.org/mailman/listinfo/dri-devel

-- 
Ville Syrjälä
Intel OTC
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel




[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux