On Thu, Apr 14, 2011 at 10:28:43AM -0400, Alex Deucher wrote: > On Thu, Apr 14, 2011 at 4:56 AM, Joerg Roedel <joro@xxxxxxxxxx> wrote: > > And this makes a difference, with this change on-top of -rc3 the box boots > > fine. So there seems to be some dependency between the GART base and the GTT > > base even when they are in different address spaces. > > > > Alex, can you comment on this? > > As Dave said, they are completely different addresses spaces. You > could put the GPU aperture at 0 if you wanted (in fact we do on some > chips). Perhaps there's some strange interaction with the nb gart > since the nb gart on that chipset was designed to be used for graphics > and the rs780/880 can be configured to use an agp aperture. > Unfortunately, I'm not that familiar with the nb gart. Actually, the nb gart is part of the cpu. It is part of the cpu north bridge and can translate io and cpu accesses. In fact, it is a remapper of physical memory addresses. The problem seems to be related to specific gpu chips. On another notebook with an hd3000 card gtt and the nb gart aperture are both on 0xa0000000 too but the box works fine. I havn't tested with an hd5000 yet. The failing notebook has an hd4200 mobility. Btw. what happens if the gpu accesses an unmapped address in the gtt range? Regards, Joerg _______________________________________________ dri-devel mailing list dri-devel@xxxxxxxxxxxxxxxxxxxxx http://lists.freedesktop.org/mailman/listinfo/dri-devel
