From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
Get rid of complex ping-pong mechanism and replace it with simpler
single buffer flipping code.
The LCDC HW appears to be designed mainly static framebuffers in
mind. There are two modes of operation, either static single buffer,
or ping pong double buffering with two static buffers switching back
and forth. Luckily the framebuffer start address is fetched only in
the beginning of the frame and changing the address after that only
takes effect after the next vertical blank. The page flipping code can
simply write the address of the new framebuffer and the page is
flipped automatically after the next vertical blank. Using the ping
pong double buffering makes the flipping code way more complex and it
does not provide any benefit, so it is better to switch to single
buffer operation.
There is still one problem in updating the framebuffer dma address on
the fly. There are two registers defining the framebuffer dma area and
things may break if the dma address is fetched in while the registers
are are being updated.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
[Added description to the patch]
Signed-off-by: Jyri Sarha <jsarha@xxxxxx>
---
drivers/gpu/drm/tilcdc/tilcdc_crtc.c | 121 +++++++++++++++--------------------
drivers/gpu/drm/tilcdc/tilcdc_drv.c | 27 +-------
2 files changed, 53 insertions(+), 95 deletions(-)
diff --git a/drivers/gpu/drm/tilcdc/tilcdc_crtc.c b/drivers/gpu/drm/tilcdc/tilcdc_crtc.c
index a6ef737..32572285 100644
--- a/drivers/gpu/drm/tilcdc/tilcdc_crtc.c
+++ b/drivers/gpu/drm/tilcdc/tilcdc_crtc.c
@@ -25,15 +25,12 @@ struct tilcdc_crtc {
struct drm_crtc base;
const struct tilcdc_panel_info *info;
- uint32_t dirty;
- dma_addr_t start, end;
struct drm_pending_vblank_event *event;
int dpms;
wait_queue_head_t frame_done_wq;
bool frame_done;
- /* fb currently set to scanout 0/1: */
- struct drm_framebuffer *scanout[2];
+ struct drm_framebuffer *curr_fb;
/* for deferred fb unref's: */
struct drm_flip_work unref_work;
@@ -54,62 +51,31 @@ static void unref_worker(struct drm_flip_work *work, void *val)
mutex_unlock(&dev->mode_config.mutex);
}
-static void set_scanout(struct drm_crtc *crtc, int n)
-{
- static const uint32_t base_reg[] = {
- LCDC_DMA_FB_BASE_ADDR_0_REG,
- LCDC_DMA_FB_BASE_ADDR_1_REG,
- };
- static const uint32_t ceil_reg[] = {
- LCDC_DMA_FB_CEILING_ADDR_0_REG,
- LCDC_DMA_FB_CEILING_ADDR_1_REG,
- };
- static const uint32_t stat[] = {
- LCDC_END_OF_FRAME0, LCDC_END_OF_FRAME1,
- };
- struct tilcdc_crtc *tilcdc_crtc = to_tilcdc_crtc(crtc);
- struct drm_device *dev = crtc->dev;
- struct tilcdc_drm_private *priv = dev->dev_private;
-
- tilcdc_write(dev, base_reg[n], tilcdc_crtc->start);
- tilcdc_write(dev, ceil_reg[n], tilcdc_crtc->end);
- if (tilcdc_crtc->scanout[n]) {
- drm_flip_work_queue(&tilcdc_crtc->unref_work, tilcdc_crtc->scanout[n]);
- drm_flip_work_commit(&tilcdc_crtc->unref_work, priv->wq);
- }
- tilcdc_crtc->scanout[n] = crtc->primary->fb;
- drm_framebuffer_reference(tilcdc_crtc->scanout[n]);
- tilcdc_crtc->dirty &= ~stat[n];
-}
-
-static void update_scanout(struct drm_crtc *crtc)
+static void set_scanout(struct drm_crtc *crtc, struct drm_framebuffer *fb)
{
struct tilcdc_crtc *tilcdc_crtc = to_tilcdc_crtc(crtc);
struct drm_device *dev = crtc->dev;
- struct drm_framebuffer *fb = crtc->primary->fb;
struct drm_gem_cma_object *gem;
unsigned int depth, bpp;
+ dma_addr_t start, end;
drm_fb_get_bpp_depth(fb->pixel_format, &depth, &bpp);
gem = drm_fb_cma_get_gem_obj(fb, 0);
- tilcdc_crtc->start = gem->paddr + fb->offsets[0] +
- (crtc->y * fb->pitches[0]) + (crtc->x * bpp/8);
+ start = gem->paddr + fb->offsets[0] +
+ crtc->y * fb->pitches[0] +
+ crtc->x * bpp / 8;
- tilcdc_crtc->end = tilcdc_crtc->start +
- (crtc->mode.vdisplay * fb->pitches[0]);
+ end = start + (crtc->mode.vdisplay * fb->pitches[0]);
- if (tilcdc_crtc->dpms == DRM_MODE_DPMS_ON) {
- /* already enabled, so just mark the frames that need
- * updating and they will be updated on vblank:
- */
- tilcdc_crtc->dirty |= LCDC_END_OF_FRAME0 | LCDC_END_OF_FRAME1;
- drm_vblank_get(dev, 0);
- } else {
- /* not enabled yet, so update registers immediately: */
- set_scanout(crtc, 0);
- set_scanout(crtc, 1);
- }
+ tilcdc_write(dev, LCDC_DMA_FB_BASE_ADDR_0_REG, start);
+ tilcdc_write(dev, LCDC_DMA_FB_CEILING_ADDR_0_REG, end);
+
+ if (tilcdc_crtc->curr_fb)
+ drm_flip_work_queue(&tilcdc_crtc->unref_work,
+ tilcdc_crtc->curr_fb);
+
+ tilcdc_crtc->curr_fb = fb;
}
static void reset(struct drm_crtc *crtc)
@@ -131,7 +97,7 @@ static void start(struct drm_crtc *crtc)
reset(crtc);
- tilcdc_set(dev, LCDC_DMA_CTRL_REG, LCDC_DUAL_FRAME_BUFFER_ENABLE);
+ tilcdc_clear(dev, LCDC_DMA_CTRL_REG, LCDC_DUAL_FRAME_BUFFER_ENABLE);
tilcdc_set(dev, LCDC_RASTER_CTRL_REG, LCDC_PALETTE_LOAD_MODE(DATA_ONLY));
tilcdc_set(dev, LCDC_RASTER_CTRL_REG, LCDC_RASTER_ENABLE);
}
@@ -179,6 +145,7 @@ static int tilcdc_crtc_page_flip(struct drm_crtc *crtc,
struct tilcdc_crtc *tilcdc_crtc = to_tilcdc_crtc(crtc);
struct drm_device *dev = crtc->dev;
int r;
+ unsigned long flags;
r = tilcdc_verify_fb(crtc, fb);
if (r)
@@ -189,12 +156,18 @@ static int tilcdc_crtc_page_flip(struct drm_crtc *crtc,
return -EBUSY;
}
+ drm_framebuffer_reference(fb);
+
crtc->primary->fb = fb;
- tilcdc_crtc->event = event;
pm_runtime_get_sync(dev->dev);
- update_scanout(crtc);
+
+ set_scanout(crtc, fb);
+
+ spin_lock_irqsave(&dev->event_lock, flags);
+ tilcdc_crtc->event = event;
+ spin_unlock_irqrestore(&dev->event_lock, flags);
pm_runtime_put_sync(dev->dev);
@@ -237,6 +210,14 @@ void tilcdc_crtc_dpms(struct drm_crtc *crtc, int mode)
}
pm_runtime_put_sync(dev->dev);
+
+ if (tilcdc_crtc->curr_fb) {
+ drm_flip_work_queue(&tilcdc_crtc->unref_work,
+ tilcdc_crtc->curr_fb);
+ tilcdc_crtc->curr_fb = NULL;
+ }
+
+ drm_flip_work_commit(&tilcdc_crtc->unref_work, priv->wq);
}
}
@@ -450,8 +431,10 @@ static int tilcdc_crtc_mode_set(struct drm_crtc *crtc,
else
tilcdc_clear(dev, LCDC_RASTER_CTRL_REG, LCDC_RASTER_ORDER);
+ drm_framebuffer_reference(crtc->primary->fb);
+
+ set_scanout(crtc, crtc->primary->fb);
- update_scanout(crtc);
tilcdc_crtc_update_clk(crtc);
pm_runtime_put_sync(dev->dev);
@@ -469,9 +452,14 @@ static int tilcdc_crtc_mode_set_base(struct drm_crtc *crtc, int x, int y,
if (r)
return r;
+ drm_framebuffer_reference(crtc->primary->fb);
+
pm_runtime_get_sync(dev->dev);
- update_scanout(crtc);
+
+ set_scanout(crtc, crtc->primary->fb);
+
pm_runtime_put_sync(dev->dev);
+
return 0;
}
@@ -661,30 +649,21 @@ irqreturn_t tilcdc_crtc_irq(struct drm_crtc *crtc)
stat = tilcdc_read_irqstatus(dev);
tilcdc_clear_irqstatus(dev, stat);
- if ((stat & LCDC_END_OF_FRAME0) || (stat & LCDC_END_OF_FRAME1)) {
- struct drm_pending_vblank_event *event;
+ if (stat & LCDC_END_OF_FRAME0) {
unsigned long flags;
- uint32_t dirty = tilcdc_crtc->dirty & stat;
-
- tilcdc_clear_irqstatus(dev, stat);
- if (dirty & LCDC_END_OF_FRAME0)
- set_scanout(crtc, 0);
-
- if (dirty & LCDC_END_OF_FRAME1)
- set_scanout(crtc, 1);
+ drm_flip_work_commit(&tilcdc_crtc->unref_work, priv->wq);
drm_handle_vblank(dev, 0);
spin_lock_irqsave(&dev->event_lock, flags);
- event = tilcdc_crtc->event;
- tilcdc_crtc->event = NULL;
- if (event)
- drm_send_vblank_event(dev, 0, event);
- spin_unlock_irqrestore(&dev->event_lock, flags);
- if (dirty && !tilcdc_crtc->dirty)
- drm_vblank_put(dev, 0);
+ if (tilcdc_crtc->event) {
+ drm_send_vblank_event(dev, 0, tilcdc_crtc->event);
+ tilcdc_crtc->event = NULL;
+ }
+
+ spin_unlock_irqrestore(&dev->event_lock, flags);
}
if (priv->rev == 2) {
diff --git a/drivers/gpu/drm/tilcdc/tilcdc_drv.c b/drivers/gpu/drm/tilcdc/tilcdc_drv.c
index e1f6979..c5d9e3a 100644
--- a/drivers/gpu/drm/tilcdc/tilcdc_drv.c
+++ b/drivers/gpu/drm/tilcdc/tilcdc_drv.c
@@ -381,6 +381,7 @@ static int tilcdc_irq_postinstall(struct drm_device *dev)
else
tilcdc_set(dev, LCDC_INT_ENABLE_SET_REG,
LCDC_V2_UNDERFLOW_INT_ENA |
+ LCDC_V2_END_OF_FRAME0_INT_ENA |
LCDC_FRAME_DONE);
return 0;
@@ -398,41 +399,19 @@ static void tilcdc_irq_uninstall(struct drm_device *dev)
} else {
tilcdc_clear(dev, LCDC_INT_ENABLE_SET_REG,
LCDC_V2_UNDERFLOW_INT_ENA | LCDC_V2_PL_INT_ENA |
- LCDC_V2_END_OF_FRAME0_INT_ENA | LCDC_V2_END_OF_FRAME1_INT_ENA |
+ LCDC_V2_END_OF_FRAME0_INT_ENA |
LCDC_FRAME_DONE);
}
-
-}
-
-static void enable_vblank(struct drm_device *dev, bool enable)
-{
- struct tilcdc_drm_private *priv = dev->dev_private;
- u32 reg, mask;
-
- if (priv->rev == 1) {
- reg = LCDC_DMA_CTRL_REG;
- mask = LCDC_V1_END_OF_FRAME_INT_ENA;
- } else {
- reg = LCDC_INT_ENABLE_SET_REG;
- mask = LCDC_V2_END_OF_FRAME0_INT_ENA |
- LCDC_V2_END_OF_FRAME1_INT_ENA;
- }
-
- if (enable)
- tilcdc_set(dev, reg, mask);
- else
- tilcdc_clear(dev, reg, mask);
}
static int tilcdc_enable_vblank(struct drm_device *dev, unsigned int pipe)
{
- enable_vblank(dev, true);
return 0;
}
static void tilcdc_disable_vblank(struct drm_device *dev, unsigned int pipe)
{
- enable_vblank(dev, false);
+ return;
}
#if defined(CONFIG_DEBUG_FS) || defined(CONFIG_PM_SLEEP)
--
1.9.1
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel
