[PATCH v2 17/26] drm/amd/dal: Add framebuffer compression HW programming

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Adds framebuffer compression programming. Currently unused.

Signed-off-by: Harry Wentland <harry.wentland@xxxxxxx>
Reviewed-by: Alex Deucher <alexander.deucher@xxxxxxx>
---
 .../gpu/drm/amd/dal/dc/dce110/dce110_compressor.c  | 886 +++++++++++++++++++++
 .../gpu/drm/amd/dal/dc/dce110/dce110_compressor.h  |  84 ++
 2 files changed, 970 insertions(+)
 create mode 100644 drivers/gpu/drm/amd/dal/dc/dce110/dce110_compressor.c
 create mode 100644 drivers/gpu/drm/amd/dal/dc/dce110/dce110_compressor.h

diff --git a/drivers/gpu/drm/amd/dal/dc/dce110/dce110_compressor.c b/drivers/gpu/drm/amd/dal/dc/dce110/dce110_compressor.c
new file mode 100644
index 000000000000..285d54439f4c
--- /dev/null
+++ b/drivers/gpu/drm/amd/dal/dc/dce110/dce110_compressor.c
@@ -0,0 +1,886 @@
+/*
+ * Copyright 2012-15 Advanced Micro Devices, Inc.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
+ * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR
+ * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+ * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ *
+ * Authors: AMD
+ *
+ */
+
+#include "dm_services.h"
+
+#include "dce/dce_11_0_d.h"
+#include "dce/dce_11_0_sh_mask.h"
+#include "gmc/gmc_8_2_sh_mask.h"
+#include "gmc/gmc_8_2_d.h"
+
+#include "include/logger_interface.h"
+#include "include/adapter_service_interface.h"
+
+#include "dce110_compressor.h"
+
+#define DCP_REG(reg)\
+	(reg + cp110->offsets.dcp_offset)
+#define DMIF_REG(reg)\
+	(reg + cp110->offsets.dmif_offset)
+
+static const struct dce110_compressor_reg_offsets reg_offsets[] = {
+{
+	.dcp_offset = (mmDCP0_GRPH_CONTROL - mmDCP0_GRPH_CONTROL),
+	.dmif_offset =
+		(mmDMIF_PG0_DPG_PIPE_DPM_CONTROL
+			- mmDMIF_PG0_DPG_PIPE_DPM_CONTROL),
+},
+{
+	.dcp_offset = (mmDCP1_GRPH_CONTROL - mmDCP0_GRPH_CONTROL),
+	.dmif_offset =
+		(mmDMIF_PG1_DPG_PIPE_DPM_CONTROL
+			- mmDMIF_PG0_DPG_PIPE_DPM_CONTROL),
+},
+{
+	.dcp_offset = (mmDCP2_GRPH_CONTROL - mmDCP0_GRPH_CONTROL),
+	.dmif_offset =
+		(mmDMIF_PG2_DPG_PIPE_DPM_CONTROL
+			- mmDMIF_PG0_DPG_PIPE_DPM_CONTROL),
+}
+};
+
+static const uint32_t dce11_one_lpt_channel_max_resolution = 2560 * 1600;
+
+enum fbc_idle_force {
+	/* Bit 0 - Display registers updated */
+	FBC_IDLE_FORCE_DISPLAY_REGISTER_UPDATE = 0x00000001,
+
+	/* Bit 2 - FBC_GRPH_COMP_EN register updated */
+	FBC_IDLE_FORCE_GRPH_COMP_EN = 0x00000002,
+	/* Bit 3 - FBC_SRC_SEL register updated */
+	FBC_IDLE_FORCE_SRC_SEL_CHANGE = 0x00000004,
+	/* Bit 4 - FBC_MIN_COMPRESSION register updated */
+	FBC_IDLE_FORCE_MIN_COMPRESSION_CHANGE = 0x00000008,
+	/* Bit 5 - FBC_ALPHA_COMP_EN register updated */
+	FBC_IDLE_FORCE_ALPHA_COMP_EN = 0x00000010,
+	/* Bit 6 - FBC_ZERO_ALPHA_CHUNK_SKIP_EN register updated */
+	FBC_IDLE_FORCE_ZERO_ALPHA_CHUNK_SKIP_EN = 0x00000020,
+	/* Bit 7 - FBC_FORCE_COPY_TO_COMP_BUF register updated */
+	FBC_IDLE_FORCE_FORCE_COPY_TO_COMP_BUF = 0x00000040,
+
+	/* Bit 24 - Memory write to region 0 defined by MC registers. */
+	FBC_IDLE_FORCE_MEMORY_WRITE_TO_REGION0 = 0x01000000,
+	/* Bit 25 - Memory write to region 1 defined by MC registers */
+	FBC_IDLE_FORCE_MEMORY_WRITE_TO_REGION1 = 0x02000000,
+	/* Bit 26 - Memory write to region 2 defined by MC registers */
+	FBC_IDLE_FORCE_MEMORY_WRITE_TO_REGION2 = 0x04000000,
+	/* Bit 27 - Memory write to region 3 defined by MC registers. */
+	FBC_IDLE_FORCE_MEMORY_WRITE_TO_REGION3 = 0x08000000,
+
+	/* Bit 28 - Memory write from any client other than MCIF */
+	FBC_IDLE_FORCE_MEMORY_WRITE_OTHER_THAN_MCIF = 0x10000000,
+	/* Bit 29 - CG statics screen signal is inactive */
+	FBC_IDLE_FORCE_CG_STATIC_SCREEN_IS_INACTIVE = 0x20000000,
+};
+
+static uint32_t lpt_size_alignment(struct dce110_compressor *cp110)
+{
+	/*LPT_ALIGNMENT (in bytes) = ROW_SIZE * #BANKS * # DRAM CHANNELS. */
+	return cp110->base.raw_size * cp110->base.banks_num *
+		cp110->base.dram_channels_num;
+}
+
+static uint32_t lpt_memory_control_config(struct dce110_compressor *cp110,
+	uint32_t lpt_control)
+{
+	/*LPT MC Config */
+	if (cp110->base.options.bits.LPT_MC_CONFIG == 1) {
+		/* POSSIBLE VALUES for LPT NUM_PIPES (DRAM CHANNELS):
+		 * 00 - 1 CHANNEL
+		 * 01 - 2 CHANNELS
+		 * 02 - 4 OR 6 CHANNELS
+		 * (Only for discrete GPU, N/A for CZ)
+		 * 03 - 8 OR 12 CHANNELS
+		 * (Only for discrete GPU, N/A for CZ) */
+		switch (cp110->base.dram_channels_num) {
+		case 2:
+			set_reg_field_value(
+				lpt_control,
+				1,
+				LOW_POWER_TILING_CONTROL,
+				LOW_POWER_TILING_NUM_PIPES);
+			break;
+		case 1:
+			set_reg_field_value(
+				lpt_control,
+				0,
+				LOW_POWER_TILING_CONTROL,
+				LOW_POWER_TILING_NUM_PIPES);
+			break;
+		default:
+			dal_logger_write(
+				cp110->base.ctx->logger,
+				LOG_MAJOR_WARNING,
+				LOG_MINOR_COMPONENT_CONTROLLER,
+				"%s: Invalid LPT NUM_PIPES!!!",
+				__func__);
+			break;
+		}
+
+		/* The mapping for LPT NUM_BANKS is in
+		 * GRPH_CONTROL.GRPH_NUM_BANKS register field
+		 * Specifies the number of memory banks for tiling
+		 * purposes. Only applies to 2D and 3D tiling modes.
+		 * POSSIBLE VALUES:
+		 * 00 - DCP_GRPH_NUM_BANKS_2BANK: ADDR_SURF_2_BANK
+		 * 01 - DCP_GRPH_NUM_BANKS_4BANK: ADDR_SURF_4_BANK
+		 * 02 - DCP_GRPH_NUM_BANKS_8BANK: ADDR_SURF_8_BANK
+		 * 03 - DCP_GRPH_NUM_BANKS_16BANK: ADDR_SURF_16_BANK */
+		switch (cp110->base.banks_num) {
+		case 16:
+			set_reg_field_value(
+				lpt_control,
+				3,
+				LOW_POWER_TILING_CONTROL,
+				LOW_POWER_TILING_NUM_BANKS);
+			break;
+		case 8:
+			set_reg_field_value(
+				lpt_control,
+				2,
+				LOW_POWER_TILING_CONTROL,
+				LOW_POWER_TILING_NUM_BANKS);
+			break;
+		case 4:
+			set_reg_field_value(
+				lpt_control,
+				1,
+				LOW_POWER_TILING_CONTROL,
+				LOW_POWER_TILING_NUM_BANKS);
+			break;
+		case 2:
+			set_reg_field_value(
+				lpt_control,
+				0,
+				LOW_POWER_TILING_CONTROL,
+				LOW_POWER_TILING_NUM_BANKS);
+			break;
+		default:
+			dal_logger_write(
+				cp110->base.ctx->logger,
+				LOG_MAJOR_WARNING,
+				LOG_MINOR_COMPONENT_CONTROLLER,
+				"%s: Invalid LPT NUM_BANKS!!!",
+				__func__);
+			break;
+		}
+
+		/* The mapping is in DMIF_ADDR_CALC.
+		 * ADDR_CONFIG_PIPE_INTERLEAVE_SIZE register field for
+		 * Carrizo specifies the memory interleave per pipe.
+		 * It effectively specifies the location of pipe bits in
+		 * the memory address.
+		 * POSSIBLE VALUES:
+		 * 00 - ADDR_CONFIG_PIPE_INTERLEAVE_256B: 256 byte
+		 * interleave
+		 * 01 - ADDR_CONFIG_PIPE_INTERLEAVE_512B: 512 byte
+		 * interleave
+		 */
+		switch (cp110->base.channel_interleave_size) {
+		case 256: /*256B */
+			set_reg_field_value(
+				lpt_control,
+				0,
+				LOW_POWER_TILING_CONTROL,
+				LOW_POWER_TILING_PIPE_INTERLEAVE_SIZE);
+			break;
+		case 512: /*512B */
+			set_reg_field_value(
+				lpt_control,
+				1,
+				LOW_POWER_TILING_CONTROL,
+				LOW_POWER_TILING_PIPE_INTERLEAVE_SIZE);
+			break;
+		default:
+			dal_logger_write(
+				cp110->base.ctx->logger,
+				LOG_MAJOR_WARNING,
+				LOG_MINOR_COMPONENT_CONTROLLER,
+				"%s: Invalid LPT INTERLEAVE_SIZE!!!",
+				__func__);
+			break;
+		}
+
+		/* The mapping for LOW_POWER_TILING_ROW_SIZE is in
+		 * DMIF_ADDR_CALC.ADDR_CONFIG_ROW_SIZE register field
+		 * for Carrizo. Specifies the size of dram row in bytes.
+		 * This should match up with NOOFCOLS field in
+		 * MC_ARB_RAMCFG (ROW_SIZE = 4 * 2 ^^ columns).
+		 * This register DMIF_ADDR_CALC is not used by the
+		 * hardware as it is only used for addrlib assertions.
+		 * POSSIBLE VALUES:
+		 * 00 - ADDR_CONFIG_1KB_ROW: Treat 1KB as DRAM row
+		 * boundary
+		 * 01 - ADDR_CONFIG_2KB_ROW: Treat 2KB as DRAM row
+		 * boundary
+		 * 02 - ADDR_CONFIG_4KB_ROW: Treat 4KB as DRAM row
+		 * boundary */
+		switch (cp110->base.raw_size) {
+		case 4096: /*4 KB */
+			set_reg_field_value(
+				lpt_control,
+				2,
+				LOW_POWER_TILING_CONTROL,
+				LOW_POWER_TILING_ROW_SIZE);
+			break;
+		case 2048:
+			set_reg_field_value(
+				lpt_control,
+				1,
+				LOW_POWER_TILING_CONTROL,
+				LOW_POWER_TILING_ROW_SIZE);
+			break;
+		case 1024:
+			set_reg_field_value(
+				lpt_control,
+				0,
+				LOW_POWER_TILING_CONTROL,
+				LOW_POWER_TILING_ROW_SIZE);
+			break;
+		default:
+			dal_logger_write(
+				cp110->base.ctx->logger,
+				LOG_MAJOR_WARNING,
+				LOG_MINOR_COMPONENT_CONTROLLER,
+				"%s: Invalid LPT ROW_SIZE!!!",
+				__func__);
+			break;
+		}
+	} else {
+		dal_logger_write(
+			cp110->base.ctx->logger,
+			LOG_MAJOR_WARNING,
+			LOG_MINOR_COMPONENT_CONTROLLER,
+			"%s: LPT MC Configuration is not provided",
+			__func__);
+	}
+
+	return lpt_control;
+}
+
+
+
+static bool is_source_bigger_than_epanel_size(
+	struct dce110_compressor *cp110,
+	uint32_t source_view_width,
+	uint32_t source_view_height)
+{
+	if (cp110->base.embedded_panel_h_size != 0 &&
+		cp110->base.embedded_panel_v_size != 0 &&
+		((source_view_width * source_view_height) >
+		(cp110->base.embedded_panel_h_size *
+			cp110->base.embedded_panel_v_size)))
+		return true;
+
+	return false;
+}
+
+static uint32_t align_to_chunks_number_per_line(
+	struct dce110_compressor *cp110,
+	uint32_t pixels)
+{
+	return 256 * ((pixels + 255) / 256);
+}
+
+static void wait_for_fbc_state_changed(
+	struct dce110_compressor *cp110,
+	bool enabled)
+{
+	uint8_t counter = 0;
+	uint32_t addr = mmFBC_STATUS;
+	uint32_t value;
+
+	while (counter < 10) {
+		value = dm_read_reg(cp110->base.ctx, addr);
+		if (get_reg_field_value(
+			value,
+			FBC_STATUS,
+			FBC_ENABLE_STATUS) == enabled)
+			break;
+		dm_delay_in_microseconds(cp110->base.ctx, 10);
+		counter++;
+	}
+
+	if (counter == 10) {
+		dal_logger_write(
+			cp110->base.ctx->logger,
+			LOG_MAJOR_WARNING,
+			LOG_MINOR_COMPONENT_CONTROLLER,
+			"%s: wait counter exceeded, changes to HW not applied",
+			__func__);
+	}
+}
+
+void dce110_compressor_power_up_fbc(struct compressor *compressor)
+{
+	uint32_t value;
+	uint32_t addr;
+
+	addr = mmFBC_CNTL;
+	value = dm_read_reg(compressor->ctx, addr);
+	set_reg_field_value(value, 0, FBC_CNTL, FBC_GRPH_COMP_EN);
+	set_reg_field_value(value, 1, FBC_CNTL, FBC_EN);
+	set_reg_field_value(value, 2, FBC_CNTL, FBC_COHERENCY_MODE);
+	if (compressor->options.bits.CLK_GATING_DISABLED == 1) {
+		/* HW needs to do power measurement comparison. */
+		set_reg_field_value(
+			value,
+			0,
+			FBC_CNTL,
+			FBC_COMP_CLK_GATE_EN);
+	}
+	dm_write_reg(compressor->ctx, addr, value);
+
+	addr = mmFBC_COMP_MODE;
+	value = dm_read_reg(compressor->ctx, addr);
+	set_reg_field_value(value, 1, FBC_COMP_MODE, FBC_RLE_EN);
+	set_reg_field_value(value, 1, FBC_COMP_MODE, FBC_DPCM4_RGB_EN);
+	set_reg_field_value(value, 1, FBC_COMP_MODE, FBC_IND_EN);
+	dm_write_reg(compressor->ctx, addr, value);
+
+	addr = mmFBC_COMP_CNTL;
+	value = dm_read_reg(compressor->ctx, addr);
+	set_reg_field_value(value, 1, FBC_COMP_CNTL, FBC_DEPTH_RGB08_EN);
+	dm_write_reg(compressor->ctx, addr, value);
+	/*FBC_MIN_COMPRESSION 0 ==> 2:1 */
+	/*                    1 ==> 4:1 */
+	/*                    2 ==> 8:1 */
+	/*                  0xF ==> 1:1 */
+	set_reg_field_value(value, 0xF, FBC_COMP_CNTL, FBC_MIN_COMPRESSION);
+	dm_write_reg(compressor->ctx, addr, value);
+	compressor->min_compress_ratio = FBC_COMPRESS_RATIO_1TO1;
+
+	value = 0;
+	dm_write_reg(compressor->ctx, mmFBC_IND_LUT0, value);
+
+	value = 0xFFFFFF;
+	dm_write_reg(compressor->ctx, mmFBC_IND_LUT1, value);
+}
+
+void dce110_compressor_enable_fbc(
+	struct compressor *compressor,
+	uint32_t paths_num,
+	struct compr_addr_and_pitch_params *params)
+{
+	struct dce110_compressor *cp110 = TO_DCE110_COMPRESSOR(compressor);
+
+	if (compressor->options.bits.FBC_SUPPORT &&
+		(compressor->options.bits.DUMMY_BACKEND == 0) &&
+		(!dce110_compressor_is_fbc_enabled_in_hw(compressor, NULL)) &&
+		(!is_source_bigger_than_epanel_size(
+			cp110,
+			params->source_view_width,
+			params->source_view_height))) {
+
+		uint32_t addr;
+		uint32_t value;
+
+		/* Before enabling FBC first need to enable LPT if applicable
+		 * LPT state should always be changed (enable/disable) while FBC
+		 * is disabled */
+		if (compressor->options.bits.LPT_SUPPORT && (paths_num < 2) &&
+			(params->source_view_width *
+				params->source_view_height <=
+				dce11_one_lpt_channel_max_resolution)) {
+			dce110_compressor_enable_lpt(compressor);
+		}
+
+		addr = mmFBC_CNTL;
+		value = dm_read_reg(compressor->ctx, addr);
+		set_reg_field_value(value, 1, FBC_CNTL, FBC_GRPH_COMP_EN);
+		set_reg_field_value(
+			value,
+			params->inst,
+			FBC_CNTL, FBC_SRC_SEL);
+		dm_write_reg(compressor->ctx, addr, value);
+
+		/* Keep track of enum controller_id FBC is attached to */
+		compressor->is_enabled = true;
+		compressor->attached_inst = params->inst;
+		cp110->offsets = reg_offsets[params->inst - 1];
+
+		/*Toggle it as there is bug in HW */
+		set_reg_field_value(value, 0, FBC_CNTL, FBC_GRPH_COMP_EN);
+		dm_write_reg(compressor->ctx, addr, value);
+		set_reg_field_value(value, 1, FBC_CNTL, FBC_GRPH_COMP_EN);
+		dm_write_reg(compressor->ctx, addr, value);
+
+		wait_for_fbc_state_changed(cp110, true);
+	}
+}
+
+void dce110_compressor_disable_fbc(struct compressor *compressor)
+{
+	struct dce110_compressor *cp110 = TO_DCE110_COMPRESSOR(compressor);
+
+	if (compressor->options.bits.FBC_SUPPORT &&
+		dce110_compressor_is_fbc_enabled_in_hw(compressor, NULL)) {
+		uint32_t reg_data;
+		/* Turn off compression */
+		reg_data = dm_read_reg(compressor->ctx, mmFBC_CNTL);
+		set_reg_field_value(reg_data, 0, FBC_CNTL, FBC_GRPH_COMP_EN);
+		dm_write_reg(compressor->ctx, mmFBC_CNTL, reg_data);
+
+		/* Reset enum controller_id to undefined */
+		compressor->attached_inst = 0;
+		compressor->is_enabled = false;
+
+		/* Whenever disabling FBC make sure LPT is disabled if LPT
+		 * supported */
+		if (compressor->options.bits.LPT_SUPPORT)
+			dce110_compressor_disable_lpt(compressor);
+
+		wait_for_fbc_state_changed(cp110, false);
+	}
+}
+
+bool dce110_compressor_is_fbc_enabled_in_hw(
+	struct compressor *compressor,
+	uint32_t *inst)
+{
+	/* Check the hardware register */
+	uint32_t value;
+
+	value = dm_read_reg(compressor->ctx, mmFBC_STATUS);
+	if (get_reg_field_value(value, FBC_STATUS, FBC_ENABLE_STATUS)) {
+		if (inst != NULL)
+			*inst = compressor->attached_inst;
+		return true;
+	}
+
+	value = dm_read_reg(compressor->ctx, mmFBC_MISC);
+	if (get_reg_field_value(value, FBC_MISC, FBC_STOP_ON_HFLIP_EVENT)) {
+		value = dm_read_reg(compressor->ctx, mmFBC_CNTL);
+
+		if (get_reg_field_value(value, FBC_CNTL, FBC_GRPH_COMP_EN)) {
+			if (inst != NULL)
+				*inst =
+					compressor->attached_inst;
+			return true;
+		}
+	}
+	return false;
+}
+
+bool dce110_compressor_is_lpt_enabled_in_hw(struct compressor *compressor)
+{
+	/* Check the hardware register */
+	uint32_t value = dm_read_reg(compressor->ctx,
+		mmLOW_POWER_TILING_CONTROL);
+
+	return get_reg_field_value(
+		value,
+		LOW_POWER_TILING_CONTROL,
+		LOW_POWER_TILING_ENABLE);
+}
+
+void dce110_compressor_program_compressed_surface_address_and_pitch(
+	struct compressor *compressor,
+	struct compr_addr_and_pitch_params *params)
+{
+	struct dce110_compressor *cp110 = TO_DCE110_COMPRESSOR(compressor);
+	uint32_t value = 0;
+	uint32_t fbc_pitch = 0;
+	uint32_t compressed_surf_address_low_part =
+		compressor->compr_surface_address.addr.low_part;
+
+	/* Clear content first. */
+	dm_write_reg(
+		compressor->ctx,
+		DCP_REG(mmGRPH_COMPRESS_SURFACE_ADDRESS_HIGH),
+		0);
+	dm_write_reg(compressor->ctx,
+		DCP_REG(mmGRPH_COMPRESS_SURFACE_ADDRESS), 0);
+
+	if (compressor->options.bits.LPT_SUPPORT) {
+		uint32_t lpt_alignment = lpt_size_alignment(cp110);
+
+		if (lpt_alignment != 0) {
+			compressed_surf_address_low_part =
+				((compressed_surf_address_low_part
+					+ (lpt_alignment - 1)) / lpt_alignment)
+					* lpt_alignment;
+		}
+	}
+
+	/* Write address, HIGH has to be first. */
+	dm_write_reg(compressor->ctx,
+		DCP_REG(mmGRPH_COMPRESS_SURFACE_ADDRESS_HIGH),
+		compressor->compr_surface_address.addr.high_part);
+	dm_write_reg(compressor->ctx,
+		DCP_REG(mmGRPH_COMPRESS_SURFACE_ADDRESS),
+		compressed_surf_address_low_part);
+
+	fbc_pitch = align_to_chunks_number_per_line(
+		cp110,
+		params->source_view_width);
+
+	if (compressor->min_compress_ratio == FBC_COMPRESS_RATIO_1TO1)
+		fbc_pitch = fbc_pitch / 8;
+	else
+		dal_logger_write(
+			compressor->ctx->logger,
+			LOG_MAJOR_WARNING,
+			LOG_MINOR_COMPONENT_CONTROLLER,
+			"%s: Unexpected DCE11 compression ratio",
+			__func__);
+
+	/* Clear content first. */
+	dm_write_reg(compressor->ctx, DCP_REG(mmGRPH_COMPRESS_PITCH), 0);
+
+	/* Write FBC Pitch. */
+	set_reg_field_value(
+		value,
+		fbc_pitch,
+		GRPH_COMPRESS_PITCH,
+		GRPH_COMPRESS_PITCH);
+	dm_write_reg(compressor->ctx, DCP_REG(mmGRPH_COMPRESS_PITCH), value);
+
+}
+
+void dce110_compressor_disable_lpt(struct compressor *compressor)
+{
+	struct dce110_compressor *cp110 = TO_DCE110_COMPRESSOR(compressor);
+	uint32_t value;
+	uint32_t addr;
+	uint32_t inx;
+
+	/* Disable all pipes LPT Stutter */
+	for (inx = 0; inx < 3; inx++) {
+		value =
+			dm_read_reg(
+				compressor->ctx,
+				DMIF_REG(mmDPG_PIPE_STUTTER_CONTROL_NONLPTCH));
+		set_reg_field_value(
+			value,
+			0,
+			DPG_PIPE_STUTTER_CONTROL_NONLPTCH,
+			STUTTER_ENABLE_NONLPTCH);
+		dm_write_reg(
+			compressor->ctx,
+			DMIF_REG(mmDPG_PIPE_STUTTER_CONTROL_NONLPTCH),
+			value);
+	}
+	/* Disable Underlay pipe LPT Stutter */
+	addr = mmDPGV0_PIPE_STUTTER_CONTROL_NONLPTCH;
+	value = dm_read_reg(compressor->ctx, addr);
+	set_reg_field_value(
+		value,
+		0,
+		DPGV0_PIPE_STUTTER_CONTROL_NONLPTCH,
+		STUTTER_ENABLE_NONLPTCH);
+	dm_write_reg(compressor->ctx, addr, value);
+
+	/* Disable LPT */
+	addr = mmLOW_POWER_TILING_CONTROL;
+	value = dm_read_reg(compressor->ctx, addr);
+	set_reg_field_value(
+		value,
+		0,
+		LOW_POWER_TILING_CONTROL,
+		LOW_POWER_TILING_ENABLE);
+	dm_write_reg(compressor->ctx, addr, value);
+
+	/* Clear selection of Channel(s) containing Compressed Surface */
+	addr = mmGMCON_LPT_TARGET;
+	value = dm_read_reg(compressor->ctx, addr);
+	set_reg_field_value(
+		value,
+		0xFFFFFFFF,
+		GMCON_LPT_TARGET,
+		STCTRL_LPT_TARGET);
+	dm_write_reg(compressor->ctx, mmGMCON_LPT_TARGET, value);
+}
+
+void dce110_compressor_enable_lpt(struct compressor *compressor)
+{
+	struct dce110_compressor *cp110 = TO_DCE110_COMPRESSOR(compressor);
+	uint32_t value;
+	uint32_t addr;
+	uint32_t value_control;
+	uint32_t channels;
+
+	/* Enable LPT Stutter from Display pipe */
+	value = dm_read_reg(compressor->ctx,
+		DMIF_REG(mmDPG_PIPE_STUTTER_CONTROL_NONLPTCH));
+	set_reg_field_value(
+		value,
+		1,
+		DPG_PIPE_STUTTER_CONTROL_NONLPTCH,
+		STUTTER_ENABLE_NONLPTCH);
+	dm_write_reg(compressor->ctx,
+		DMIF_REG(mmDPG_PIPE_STUTTER_CONTROL_NONLPTCH), value);
+
+	/* Enable Underlay pipe LPT Stutter */
+	addr = mmDPGV0_PIPE_STUTTER_CONTROL_NONLPTCH;
+	value = dm_read_reg(compressor->ctx, addr);
+	set_reg_field_value(
+		value,
+		1,
+		DPGV0_PIPE_STUTTER_CONTROL_NONLPTCH,
+		STUTTER_ENABLE_NONLPTCH);
+	dm_write_reg(compressor->ctx, addr, value);
+
+	/* Selection of Channel(s) containing Compressed Surface: 0xfffffff
+	 * will disable LPT.
+	 * STCTRL_LPT_TARGETn corresponds to channel n. */
+	addr = mmLOW_POWER_TILING_CONTROL;
+	value_control = dm_read_reg(compressor->ctx, addr);
+	channels = get_reg_field_value(value_control,
+			LOW_POWER_TILING_CONTROL,
+			LOW_POWER_TILING_MODE);
+
+	addr = mmGMCON_LPT_TARGET;
+	value = dm_read_reg(compressor->ctx, addr);
+	set_reg_field_value(
+		value,
+		channels + 1, /* not mentioned in programming guide,
+				but follow DCE8.1 */
+		GMCON_LPT_TARGET,
+		STCTRL_LPT_TARGET);
+	dm_write_reg(compressor->ctx, addr, value);
+
+	/* Enable LPT */
+	addr = mmLOW_POWER_TILING_CONTROL;
+	value = dm_read_reg(compressor->ctx, addr);
+	set_reg_field_value(
+		value,
+		1,
+		LOW_POWER_TILING_CONTROL,
+		LOW_POWER_TILING_ENABLE);
+	dm_write_reg(compressor->ctx, addr, value);
+}
+
+void dce110_compressor_program_lpt_control(
+	struct compressor *compressor,
+	struct compr_addr_and_pitch_params *params)
+{
+	struct dce110_compressor *cp110 = TO_DCE110_COMPRESSOR(compressor);
+	uint32_t rows_per_channel;
+	uint32_t lpt_alignment;
+	uint32_t source_view_width;
+	uint32_t source_view_height;
+	uint32_t lpt_control = 0;
+
+	if (!compressor->options.bits.LPT_SUPPORT)
+		return;
+
+	lpt_control = dm_read_reg(compressor->ctx,
+		mmLOW_POWER_TILING_CONTROL);
+
+	/* POSSIBLE VALUES for Low Power Tiling Mode:
+	 * 00 - Use channel 0
+	 * 01 - Use Channel 0 and 1
+	 * 02 - Use Channel 0,1,2,3
+	 * 03 - reserved */
+	switch (compressor->lpt_channels_num) {
+	/* case 2:
+	 * Use Channel 0 & 1 / Not used for DCE 11 */
+	case 1:
+		/*Use Channel 0 for LPT for DCE 11 */
+		set_reg_field_value(
+			lpt_control,
+			0,
+			LOW_POWER_TILING_CONTROL,
+			LOW_POWER_TILING_MODE);
+		break;
+	default:
+		dal_logger_write(
+			compressor->ctx->logger,
+			LOG_MAJOR_WARNING,
+			LOG_MINOR_COMPONENT_CONTROLLER,
+			"%s: Invalid selected DRAM channels for LPT!!!",
+			__func__);
+		break;
+	}
+
+	lpt_control = lpt_memory_control_config(cp110, lpt_control);
+
+	/* Program LOW_POWER_TILING_ROWS_PER_CHAN field which depends on
+	 * FBC compressed surface pitch.
+	 * LOW_POWER_TILING_ROWS_PER_CHAN = Roundup ((Surface Height *
+	 * Surface Pitch) / (Row Size * Number of Channels *
+	 * Number of Banks)). */
+	rows_per_channel = 0;
+	lpt_alignment = lpt_size_alignment(cp110);
+	source_view_width =
+		align_to_chunks_number_per_line(
+			cp110,
+			params->source_view_width);
+	source_view_height = (params->source_view_height + 1) & (~0x1);
+
+	if (lpt_alignment != 0) {
+		rows_per_channel = source_view_width * source_view_height * 4;
+		rows_per_channel =
+			(rows_per_channel % lpt_alignment) ?
+				(rows_per_channel / lpt_alignment + 1) :
+				rows_per_channel / lpt_alignment;
+	}
+
+	set_reg_field_value(
+		lpt_control,
+		rows_per_channel,
+		LOW_POWER_TILING_CONTROL,
+		LOW_POWER_TILING_ROWS_PER_CHAN);
+
+	dm_write_reg(compressor->ctx,
+		mmLOW_POWER_TILING_CONTROL, lpt_control);
+}
+
+/*
+ * DCE 11 Frame Buffer Compression Implementation
+ */
+
+
+void dce110_compressor_set_fbc_invalidation_triggers(
+	struct compressor *compressor,
+	uint32_t fbc_trigger)
+{
+	/* Disable region hit event, FBC_MEMORY_REGION_MASK = 0 (bits 16-19)
+	 * for DCE 11 regions cannot be used - does not work with S/G
+	 */
+	uint32_t addr = mmFBC_CLIENT_REGION_MASK;
+	uint32_t value = dm_read_reg(compressor->ctx, addr);
+
+	set_reg_field_value(
+		value,
+		0,
+		FBC_CLIENT_REGION_MASK,
+		FBC_MEMORY_REGION_MASK);
+	dm_write_reg(compressor->ctx, addr, value);
+
+	/* Setup events when to clear all CSM entries (effectively marking
+	 * current compressed data invalid)
+	 * For DCE 11 CSM metadata 11111 means - "Not Compressed"
+	 * Used as the initial value of the metadata sent to the compressor
+	 * after invalidation, to indicate that the compressor should attempt
+	 * to compress all chunks on the current pass.  Also used when the chunk
+	 * is not successfully written to memory.
+	 * When this CSM value is detected, FBC reads from the uncompressed
+	 * buffer. Set events according to passed in value, these events are
+	 * valid for DCE11:
+	 *     - bit  0 - display register updated
+	 *     - bit 28 - memory write from any client except from MCIF
+	 *     - bit 29 - CG static screen signal is inactive
+	 * In addition, DCE11.1 also needs to set new DCE11.1 specific events
+	 * that are used to trigger invalidation on certain register changes,
+	 * for example enabling of Alpha Compression may trigger invalidation of
+	 * FBC once bit is set. These events are as follows:
+	 *      - Bit 2 - FBC_GRPH_COMP_EN register updated
+	 *      - Bit 3 - FBC_SRC_SEL register updated
+	 *      - Bit 4 - FBC_MIN_COMPRESSION register updated
+	 *      - Bit 5 - FBC_ALPHA_COMP_EN register updated
+	 *      - Bit 6 - FBC_ZERO_ALPHA_CHUNK_SKIP_EN register updated
+	 *      - Bit 7 - FBC_FORCE_COPY_TO_COMP_BUF register updated
+	 */
+	addr = mmFBC_IDLE_FORCE_CLEAR_MASK;
+	value = dm_read_reg(compressor->ctx, addr);
+	set_reg_field_value(
+		value,
+		fbc_trigger |
+		FBC_IDLE_FORCE_GRPH_COMP_EN |
+		FBC_IDLE_FORCE_SRC_SEL_CHANGE |
+		FBC_IDLE_FORCE_MIN_COMPRESSION_CHANGE |
+		FBC_IDLE_FORCE_ALPHA_COMP_EN |
+		FBC_IDLE_FORCE_ZERO_ALPHA_CHUNK_SKIP_EN |
+		FBC_IDLE_FORCE_FORCE_COPY_TO_COMP_BUF,
+		FBC_IDLE_FORCE_CLEAR_MASK,
+		FBC_IDLE_FORCE_CLEAR_MASK);
+	dm_write_reg(compressor->ctx, addr, value);
+}
+
+bool dce110_compressor_construct(struct dce110_compressor *compressor,
+	struct dc_context *ctx, struct adapter_service *as)
+{
+	struct embedded_panel_info panel_info;
+
+	compressor->base.options.bits.FBC_SUPPORT = true;
+	if (!(dal_adapter_service_is_feature_supported(
+		FEATURE_DISABLE_LPT_SUPPORT)))
+		compressor->base.options.bits.LPT_SUPPORT = true;
+	 /* For DCE 11 always use one DRAM channel for LPT */
+	compressor->base.lpt_channels_num = 1;
+
+	if (dal_adapter_service_is_feature_supported(FEATURE_DUMMY_FBC_BACKEND))
+		compressor->base.options.bits.DUMMY_BACKEND = true;
+
+	/* Check if this system has more than 1 DRAM channel; if only 1 then LPT
+	 * should not be supported */
+	if (compressor->base.memory_bus_width == 64)
+		compressor->base.options.bits.LPT_SUPPORT = false;
+
+	if (dal_adapter_service_is_feature_supported(
+		FEATURE_DISABLE_FBC_COMP_CLK_GATE))
+		compressor->base.options.bits.CLK_GATING_DISABLED = true;
+
+	compressor->base.ctx = ctx;
+	compressor->base.embedded_panel_h_size = 0;
+	compressor->base.embedded_panel_v_size = 0;
+	compressor->base.memory_bus_width =
+		dal_adapter_service_get_asic_vram_bit_width(as);
+	compressor->base.allocated_size = 0;
+	compressor->base.preferred_requested_size = 0;
+	compressor->base.min_compress_ratio = FBC_COMPRESS_RATIO_INVALID;
+	compressor->base.options.raw = 0;
+	compressor->base.banks_num = 0;
+	compressor->base.raw_size = 0;
+	compressor->base.channel_interleave_size = 0;
+	compressor->base.dram_channels_num = 0;
+	compressor->base.lpt_channels_num = 0;
+	compressor->base.attached_inst = 0;
+	compressor->base.is_enabled = false;
+
+	if (dal_adapter_service_get_embedded_panel_info(as,
+		&panel_info)) {
+		compressor->base.embedded_panel_h_size =
+			panel_info.lcd_timing.horizontal_addressable;
+		compressor->base.embedded_panel_v_size =
+			panel_info.lcd_timing.vertical_addressable;
+	}
+	return true;
+}
+
+struct compressor *dce110_compressor_create(struct dc_context *ctx,
+	struct adapter_service *as)
+{
+	struct dce110_compressor *cp110 =
+		dm_alloc(ctx, sizeof(struct dce110_compressor));
+
+	if (!cp110)
+		return NULL;
+
+	if (dce110_compressor_construct(cp110, ctx, as))
+		return &cp110->base;
+
+	BREAK_TO_DEBUGGER();
+	dm_free(ctx, cp110);
+	return NULL;
+}
+
+void dce110_compressor_destroy(struct compressor **compressor)
+{
+	dm_free((*compressor)->ctx, TO_DCE110_COMPRESSOR(*compressor));
+	*compressor = NULL;
+}
diff --git a/drivers/gpu/drm/amd/dal/dc/dce110/dce110_compressor.h b/drivers/gpu/drm/amd/dal/dc/dce110/dce110_compressor.h
new file mode 100644
index 000000000000..0beef2243d04
--- /dev/null
+++ b/drivers/gpu/drm/amd/dal/dc/dce110/dce110_compressor.h
@@ -0,0 +1,84 @@
+/* Copyright 2012-15 Advanced Micro Devices, Inc.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
+ * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR
+ * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+ * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ *
+ * Authors: AMD
+ *
+ */
+
+#ifndef __DC_COMPRESSOR_DCE110_H__
+#define __DC_COMPRESSOR_DCE110_H__
+
+#include "../inc/compressor.h"
+
+#define TO_DCE110_COMPRESSOR(compressor)\
+	container_of(compressor, struct dce110_compressor, base)
+
+struct dce110_compressor_reg_offsets {
+	uint32_t dcp_offset;
+	uint32_t dmif_offset;
+};
+
+struct dce110_compressor {
+	struct compressor base;
+	struct dce110_compressor_reg_offsets offsets;
+};
+
+struct compressor *dce110_compressor_create(struct dc_context *ctx,
+	struct adapter_service *as);
+
+bool dce110_compressor_construct(struct dce110_compressor *cp110,
+	struct dc_context *ctx, struct adapter_service *as);
+
+void dce110_compressor_destroy(struct compressor **cp);
+
+/* FBC RELATED */
+void dce110_compressor_power_up_fbc(struct compressor *cp);
+
+void dce110_compressor_enable_fbc(struct compressor *cp, uint32_t paths_num,
+	struct compr_addr_and_pitch_params *params);
+
+void dce110_compressor_disable_fbc(struct compressor *cp);
+
+void dce110_compressor_set_fbc_invalidation_triggers(struct compressor *cp,
+	uint32_t fbc_trigger);
+
+void dce110_compressor_program_compressed_surface_address_and_pitch(
+	struct compressor *cp,
+	struct compr_addr_and_pitch_params *params);
+
+bool dce110_compressor_get_required_compressed_surface_size(
+	struct compressor *cp,
+	struct fbc_input_info *input_info,
+	struct fbc_requested_compressed_size *size);
+
+bool dce110_compressor_is_fbc_enabled_in_hw(struct compressor *cp,
+	uint32_t *fbc_mapped_crtc_id);
+
+/* LPT RELATED */
+void dce110_compressor_enable_lpt(struct compressor *cp);
+
+void dce110_compressor_disable_lpt(struct compressor *cp);
+
+void dce110_compressor_program_lpt_control(struct compressor *cp,
+	struct compr_addr_and_pitch_params *params);
+
+bool dce110_compressor_is_lpt_enabled_in_hw(struct compressor *cp);
+
+#endif
-- 
2.1.4

_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel




[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux