We weren't updating the interlaced bit, so we'd scan out incorrectly
if the firmware had brought up the TV encoder and we were switching to
HDMI.
Signed-off-by: Eric Anholt <eric@xxxxxxxxxx>
---
drivers/gpu/drm/vc4/vc4_crtc.c | 6 ++++++
drivers/gpu/drm/vc4/vc4_regs.h | 14 ++++++++++++++
2 files changed, 20 insertions(+)
diff --git a/drivers/gpu/drm/vc4/vc4_crtc.c b/drivers/gpu/drm/vc4/vc4_crtc.c
index 89562904..66499e3 100644
--- a/drivers/gpu/drm/vc4/vc4_crtc.c
+++ b/drivers/gpu/drm/vc4/vc4_crtc.c
@@ -188,6 +188,8 @@ static int vc4_get_clock_select(struct drm_crtc *crtc)
static void vc4_crtc_mode_set_nofb(struct drm_crtc *crtc)
{
+ struct drm_device *dev = crtc->dev;
+ struct vc4_dev *vc4 = to_vc4_dev(dev);
struct vc4_crtc *vc4_crtc = to_vc4_crtc(crtc);
struct drm_crtc_state *state = crtc->state;
struct drm_display_mode *mode = &state->adjusted_mode;
@@ -256,6 +258,10 @@ static void vc4_crtc_mode_set_nofb(struct drm_crtc *crtc)
PV_CONTROL_FIFO_CLR |
PV_CONTROL_EN);
+ HVS_WRITE(SCALER_DISPBKGNDX(vc4_crtc->channel),
+ SCALER_DISPBKGND_AUTOHS |
+ (interlace ? SCALER_DISPBKGND_INTERLACE : 0));
+
if (debug_dump_regs) {
DRM_INFO("CRTC %d regs after:\n", drm_crtc_index(crtc));
vc4_crtc_dump_regs(vc4_crtc);
diff --git a/drivers/gpu/drm/vc4/vc4_regs.h b/drivers/gpu/drm/vc4/vc4_regs.h
index 58d4cb3..bf42a8e 100644
--- a/drivers/gpu/drm/vc4/vc4_regs.h
+++ b/drivers/gpu/drm/vc4/vc4_regs.h
@@ -350,6 +350,17 @@
# define SCALER_DISPCTRLX_HEIGHT_SHIFT 0
#define SCALER_DISPBKGND0 0x00000044
+# define SCALER_DISPBKGND_AUTOHS BIT(31)
+# define SCALER_DISPBKGND_INTERLACE BIT(30)
+# define SCALER_DISPBKGND_GAMMA BIT(29)
+# define SCALER_DISPBKGND_TESTMODE_MASK VC4_MASK(28, 25)
+# define SCALER_DISPBKGND_TESTMODE_SHIFT 25
+/* Enables filling the scaler line with the RGB value in the low 24
+ * bits before compositing. Costs cycles, so should be skipped if
+ * opaque display planes will cover everything.
+ */
+# define SCALER_DISPBKGND_FILL BIT(24)
+
#define SCALER_DISPSTAT0 0x00000048
#define SCALER_DISPBASE0 0x0000004c
# define SCALER_DISPSTATX_MODE_MASK VC4_MASK(31, 30)
@@ -362,6 +373,9 @@
# define SCALER_DISPSTATX_EMPTY BIT(28)
#define SCALER_DISPCTRL1 0x00000050
#define SCALER_DISPBKGND1 0x00000054
+#define SCALER_DISPBKGNDX(x) (SCALER_DISPBKGND0 + \
+ (x) * (SCALER_DISPBKGND1 - \
+ SCALER_DISPBKGND0))
#define SCALER_DISPSTAT1 0x00000058
#define SCALER_DISPSTATX(x) (SCALER_DISPSTAT0 + \
(x) * (SCALER_DISPSTAT1 - \
--
2.7.0
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel
