Hi
On Thu, Feb 11, 2016 at 11:04 PM, Tiago Vignatti
<tiago.vignatti@xxxxxxxxx> wrote:
> From: Daniel Vetter <daniel.vetter@xxxxxxxx>
>
> The userspace might need some sort of cache coherency management e.g. when CPU
> and GPU domains are being accessed through dma-buf at the same time. To
> circumvent this problem there are begin/end coherency markers, that forward
> directly to existing dma-buf device drivers vfunc hooks. Userspace can make use
> of those markers through the DMA_BUF_IOCTL_SYNC ioctl. The sequence would be
> used like following:
> - mmap dma-buf fd
> - for each drawing/upload cycle in CPU 1. SYNC_START ioctl, 2. read/write
> to mmap area 3. SYNC_END ioctl. This can be repeated as often as you
> want (with the new data being consumed by the GPU or say scanout device)
> - munmap once you don't need the buffer any more
>
> v2 (Tiago): Fix header file type names (u64 -> __u64)
> v3 (Tiago): Add documentation. Use enum dma_buf_sync_flags to the begin/end
> dma-buf functions. Check for overflows in start/length.
> v4 (Tiago): use 2d regions for sync.
> v5 (Tiago): forget about 2d regions (v4); use _IOW in DMA_BUF_IOCTL_SYNC and
> remove range information from struct dma_buf_sync.
> v6 (Tiago): use __u64 structured padded flags instead enum. Adjust
> documentation about the recommendation on using sync ioctls.
> v7 (Tiago): Alex' nit on flags definition and being even more wording in the
> doc about sync usage.
> v9 (Tiago): remove useless is_dma_buf_file check. Fix sync.flags conditionals
> and its mask order check. Add <linux/types.h> include in dma-buf.h.
>
> Cc: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
> Cc: David Herrmann <dh.herrmann@xxxxxxxxx>
> Cc: Sumit Semwal <sumit.semwal@xxxxxxxxxx>
> Reviewed-by: Stéphane Marchesin <marcheu@xxxxxxxxxxxx>
> Signed-off-by: Daniel Vetter <daniel.vetter@xxxxxxxxx>
> Signed-off-by: Tiago Vignatti <tiago.vignatti@xxxxxxxxx>
> ---
>
> I left SYNC_START and SYNC_END exclusive, just how the logic was before. If we
> see an useful use case, maybe like the way David said, to store two frames
> next to each other in the same BO, we can patch up later fairly easily.
>
> About the ioctl direction, just like Ville pointed, we're doing only
> copy_from_user at the moment and seems that _IOW is all we need. So I also
> didn't touch anything on that.
Fair enough.
All I have left are comments on coding-style, and I'll refrain from
verbalizing them.. (gnah, it is so tempting).
Reviewed-by: David Herrmann <dh.herrmann@xxxxxxxxx>
Thanks!
David
> Documentation/dma-buf-sharing.txt | 21 +++++++++++++++++-
> drivers/dma-buf/dma-buf.c | 45 +++++++++++++++++++++++++++++++++++++++
> include/uapi/linux/dma-buf.h | 40 ++++++++++++++++++++++++++++++++++
> 3 files changed, 105 insertions(+), 1 deletion(-)
> create mode 100644 include/uapi/linux/dma-buf.h
>
> diff --git a/Documentation/dma-buf-sharing.txt b/Documentation/dma-buf-sharing.txt
> index 4f4a84b..32ac32e 100644
> --- a/Documentation/dma-buf-sharing.txt
> +++ b/Documentation/dma-buf-sharing.txt
> @@ -350,7 +350,26 @@ Being able to mmap an export dma-buf buffer object has 2 main use-cases:
> handles, too). So it's beneficial to support this in a similar fashion on
> dma-buf to have a good transition path for existing Android userspace.
>
> - No special interfaces, userspace simply calls mmap on the dma-buf fd.
> + No special interfaces, userspace simply calls mmap on the dma-buf fd, making
> + sure that the cache synchronization ioctl (DMA_BUF_IOCTL_SYNC) is *always*
> + used when the access happens. This is discussed next paragraphs.
> +
> + Some systems might need some sort of cache coherency management e.g. when
> + CPU and GPU domains are being accessed through dma-buf at the same time. To
> + circumvent this problem there are begin/end coherency markers, that forward
> + directly to existing dma-buf device drivers vfunc hooks. Userspace can make
> + use of those markers through the DMA_BUF_IOCTL_SYNC ioctl. The sequence
> + would be used like following:
> + - mmap dma-buf fd
> + - for each drawing/upload cycle in CPU 1. SYNC_START ioctl, 2. read/write
> + to mmap area 3. SYNC_END ioctl. This can be repeated as often as you
> + want (with the new data being consumed by the GPU or say scanout device)
> + - munmap once you don't need the buffer any more
> +
> + Therefore, for correctness and optimal performance, systems with the memory
> + cache shared by the GPU and CPU i.e. the "coherent" and also the
> + "incoherent" are always required to use SYNC_START and SYNC_END before and
> + after, respectively, when accessing the mapped address.
>
> 2. Supporting existing mmap interfaces in importers
>
> diff --git a/drivers/dma-buf/dma-buf.c b/drivers/dma-buf/dma-buf.c
> index b2ac13b..9810d1d 100644
> --- a/drivers/dma-buf/dma-buf.c
> +++ b/drivers/dma-buf/dma-buf.c
> @@ -34,6 +34,8 @@
> #include <linux/poll.h>
> #include <linux/reservation.h>
>
> +#include <uapi/linux/dma-buf.h>
> +
> static inline int is_dma_buf_file(struct file *);
>
> struct dma_buf_list {
> @@ -251,11 +253,54 @@ out:
> return events;
> }
>
> +static long dma_buf_ioctl(struct file *file,
> + unsigned int cmd, unsigned long arg)
> +{
> + struct dma_buf *dmabuf;
> + struct dma_buf_sync sync;
> + enum dma_data_direction direction;
> +
> + dmabuf = file->private_data;
> +
> + switch (cmd) {
> + case DMA_BUF_IOCTL_SYNC:
> + if (copy_from_user(&sync, (void __user *) arg, sizeof(sync)))
> + return -EFAULT;
> +
> + if (sync.flags & ~DMA_BUF_SYNC_VALID_FLAGS_MASK)
> + return -EINVAL;
> +
> + switch (sync.flags & DMA_BUF_SYNC_RW) {
> + case DMA_BUF_SYNC_READ:
> + direction = DMA_FROM_DEVICE;
> + break;
> + case DMA_BUF_SYNC_WRITE:
> + direction = DMA_TO_DEVICE;
> + break;
> + case DMA_BUF_SYNC_RW:
> + direction = DMA_BIDIRECTIONAL;
> + break;
> + default:
> + return -EINVAL;
> + }
> +
> + if (sync.flags & DMA_BUF_SYNC_END)
> + dma_buf_end_cpu_access(dmabuf, direction);
> + else
> + dma_buf_begin_cpu_access(dmabuf, direction);
> +
> + return 0;
> + default:
> + return -ENOTTY;
> + }
> +}
> +
> static const struct file_operations dma_buf_fops = {
> .release = dma_buf_release,
> .mmap = dma_buf_mmap_internal,
> .llseek = dma_buf_llseek,
> .poll = dma_buf_poll,
> + .unlocked_ioctl = dma_buf_ioctl,
> };
>
> /*
> diff --git a/include/uapi/linux/dma-buf.h b/include/uapi/linux/dma-buf.h
> new file mode 100644
> index 0000000..fb0dedb
> --- /dev/null
> +++ b/include/uapi/linux/dma-buf.h
> @@ -0,0 +1,40 @@
> +/*
> + * Framework for buffer objects that can be shared across devices/subsystems.
> + *
> + * Copyright(C) 2015 Intel Ltd
> + *
> + * This program is free software; you can redistribute it and/or modify it
> + * under the terms of the GNU General Public License version 2 as published by
> + * the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful, but WITHOUT
> + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
> + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
> + * more details.
> + *
> + * You should have received a copy of the GNU General Public License along with
> + * this program. If not, see <http://www.gnu.org/licenses/>.
> + */
> +
> +#ifndef _DMA_BUF_UAPI_H_
> +#define _DMA_BUF_UAPI_H_
> +
> +#include <linux/types.h>
> +
> +/* begin/end dma-buf functions used for userspace mmap. */
> +struct dma_buf_sync {
> + __u64 flags;
> +};
> +
> +#define DMA_BUF_SYNC_READ (1 << 0)
> +#define DMA_BUF_SYNC_WRITE (2 << 0)
> +#define DMA_BUF_SYNC_RW (DMA_BUF_SYNC_READ | DMA_BUF_SYNC_WRITE)
> +#define DMA_BUF_SYNC_START (0 << 2)
> +#define DMA_BUF_SYNC_END (1 << 2)
> +#define DMA_BUF_SYNC_VALID_FLAGS_MASK \
> + (DMA_BUF_SYNC_RW | DMA_BUF_SYNC_END)
> +
> +#define DMA_BUF_BASE 'b'
> +#define DMA_BUF_IOCTL_SYNC _IOW(DMA_BUF_BASE, 0, struct dma_buf_sync)
> +
> +#endif
> --
> 2.1.4
>
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel
