The current default configuration is as follows:
- Invert VSYNC signal (active LOW)
- Invert HSYNC signal (active LOW)
The mode flags allow to specify the required polarity per
mode. Furthermore, none of the current driver settings is
actually a standard polarity.
This patch applies the current driver default polarities as
explicit flags to the display which has been introduced with
the driver (NEC WQVGA "nec,nl4827hc19-05b"). The driver now
also parses the flags field and applies the configuration
accordingly, by using the following values as standard
polarities: (e.g. when no flags are specified):
- VSYNC signal not inverted (active HIGH)
- HSYNC signal not inverted (active HIGH)
Signed-off-by: Stefan Agner <stefan@xxxxxxxx>
---
drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_crtc.c | 11 ++++++++---
drivers/gpu/drm/panel/panel-simple.c | 1 +
2 files changed, 9 insertions(+), 3 deletions(-)
diff --git a/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_crtc.c b/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_crtc.c
index 62377e4..b36f815 100644
--- a/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_crtc.c
+++ b/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_crtc.c
@@ -74,7 +74,7 @@ static void fsl_dcu_drm_crtc_mode_set_nofb(struct drm_crtc *crtc)
struct drm_device *dev = crtc->dev;
struct fsl_dcu_drm_device *fsl_dev = dev->dev_private;
struct drm_display_mode *mode = &crtc->state->mode;
- unsigned int hbp, hfp, hsw, vbp, vfp, vsw, div, index;
+ unsigned int hbp, hfp, hsw, vbp, vfp, vsw, div, index, pol = 0;
unsigned long dcuclk;
index = drm_crtc_index(crtc);
@@ -89,6 +89,12 @@ static void fsl_dcu_drm_crtc_mode_set_nofb(struct drm_crtc *crtc)
vfp = mode->vsync_start - mode->vdisplay;
vsw = mode->vsync_end - mode->vsync_start;
+ if (mode->flags & DRM_MODE_FLAG_NHSYNC)
+ pol |= DCU_SYN_POL_INV_HS_LOW;
+
+ if (mode->flags & DRM_MODE_FLAG_NVSYNC)
+ pol |= DCU_SYN_POL_INV_VS_LOW;
+
regmap_write(fsl_dev->regmap, DCU_HSYN_PARA,
DCU_HSYN_PARA_BP(hbp) |
DCU_HSYN_PARA_PW(hsw) |
@@ -101,8 +107,7 @@ static void fsl_dcu_drm_crtc_mode_set_nofb(struct drm_crtc *crtc)
DCU_DISP_SIZE_DELTA_Y(mode->vdisplay) |
DCU_DISP_SIZE_DELTA_X(mode->hdisplay));
regmap_write(fsl_dev->regmap, DCU_DIV_RATIO, div);
- regmap_write(fsl_dev->regmap, DCU_SYN_POL,
- DCU_SYN_POL_INV_VS_LOW | DCU_SYN_POL_INV_HS_LOW);
+ regmap_write(fsl_dev->regmap, DCU_SYN_POL, pol);
regmap_write(fsl_dev->regmap, DCU_BGND, DCU_BGND_R(0) |
DCU_BGND_G(0) | DCU_BGND_B(0));
regmap_write(fsl_dev->regmap, DCU_DCU_MODE,
diff --git a/drivers/gpu/drm/panel/panel-simple.c b/drivers/gpu/drm/panel/panel-simple.c
index f88a631..2164c99 100644
--- a/drivers/gpu/drm/panel/panel-simple.c
+++ b/drivers/gpu/drm/panel/panel-simple.c
@@ -1016,6 +1016,7 @@ static const struct drm_display_mode nec_nl4827hc19_05b_mode = {
.vsync_end = 272 + 2 + 4,
.vtotal = 272 + 2 + 4 + 2,
.vrefresh = 74,
+ .flags = DRM_MODE_FLAG_NVSYNC | DRM_MODE_FLAG_NHSYNC,
};
static const struct panel_desc nec_nl4827hc19_05b = {
--
2.7.1
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel
