Signed-off-by: Chris Wilson <chris@xxxxxxxxxxxxxxxxxx>
---
drivers/gpu/drm/drm_modes.c | 52 +++++++++++++++++++++++++++++++++++++++++-
1 files changed, 50 insertions(+), 2 deletions(-)
diff --git a/drivers/gpu/drm/drm_modes.c b/drivers/gpu/drm/drm_modes.c
index 25bf873..b3e07ac 100644
--- a/drivers/gpu/drm/drm_modes.c
+++ b/drivers/gpu/drm/drm_modes.c
@@ -853,6 +853,52 @@ void drm_mode_validate_clocks(struct drm_device *dev,
}
EXPORT_SYMBOL(drm_mode_validate_clocks);
+static const char *mode_status_to_string(enum drm_mode_status status)
+{
+ const char *strings[] = {
+ [MODE_OK] = "OK",
+ [MODE_HSYNC] = "hsync out of range",
+ [MODE_VSYNC] = "vsync out of range",
+ [MODE_H_ILLEGAL] = "illegal horizontal timings",
+ [MODE_V_ILLEGAL] = "illegal vertical timings",
+ [MODE_BAD_WIDTH] = "requires an unsupported linepitch",
+ [MODE_NOMODE] = "no mode with a maching name",
+ [MODE_NO_INTERLACE] = "interlaced mode not supported",
+ [MODE_NO_DBLESCAN] = "doublescan mode not supported",
+ [MODE_NO_VSCAN] = "multiscan mode not supported",
+ [MODE_MEM] = "insufficient video memory",
+ [MODE_VIRTUAL_X] = "mode width too large for specified virtual size",
+ [MODE_VIRTUAL_Y] = "mode height too large for specified virtual size",
+ [MODE_MEM_VIRT] = "insufficient video memory given virtual size",
+ [MODE_NOCLOCK] = "no fixed clock available",
+ [MODE_CLOCK_HIGH] = "clock required is too high",
+ [MODE_CLOCK_LOW] = "clock required is too low",
+ [MODE_CLOCK_RANGE] = "clock/mode isn't in a ClockRange",
+ [MODE_BAD_HVALUE] = "horizontal timing was out of range",
+ [MODE_BAD_VVALUE] = "vertical timing was out of range",
+ [MODE_BAD_VSCAN] = "VScan value out of range",
+ [MODE_HSYNC_NARROW] = "horizontal sync too narrow",
+ [MODE_HSYNC_WIDE] = "horizontal sync too wide",
+ [MODE_HBLANK_NARROW] = "horizontal blanking too narrow",
+ [MODE_HBLANK_WIDE] = "horizontal blanking too wide",
+ [MODE_VSYNC_NARROW] = "vertical sync too narrow",
+ [MODE_VSYNC_WIDE] = "vertical sync too wide",
+ [MODE_VBLANK_NARROW] = "vertical blanking too narrow",
+ [MODE_VBLANK_WIDE] = "vertical blanking too wide",
+ [MODE_PANEL] = "exceeds panel dimensions",
+ [MODE_INTERLACE_WIDTH] = "width too large for interlaced mode",
+ [MODE_ONE_WIDTH] = "only one width is supported",
+ [MODE_ONE_HEIGHT] = "only one height is supported",
+ [MODE_ONE_SIZE] = "only one resolution is supported",
+ [MODE_NO_REDUCED] = "monitor doesn't accept reduced blanking",
+ };
+
+ if ((unsigned)status > ARRAY_SIZE(strings))
+ return "unknown";
+
+ return strings[status];
+}
+
/**
* drm_mode_prune_invalid - remove invalid modes from mode list
* @dev: DRM device
@@ -876,8 +922,10 @@ void drm_mode_prune_invalid(struct drm_device *dev,
list_del(&mode->head);
if (verbose) {
drm_mode_debug_printmodeline(mode);
- DRM_DEBUG_KMS("Not using %s mode %d\n",
- mode->name, mode->status);
+ DRM_DEBUG_KMS("Not using %s mode: %s [%d]\n",
+ mode->name,
+ mode_status_to_string(mode->status),
+ mode->status);
}
drm_mode_destroy(dev, mode);
}
--
1.7.4.1
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
http://lists.freedesktop.org/mailman/listinfo/dri-devel
