https://bugs.freedesktop.org/show_bug.cgi?id=35894 --- Comment #1 from woogie@xxxxxxxxx 2011-04-03 09:04:24 PDT --- I've experimented further with RandR, and I've found some additional information: A configuration of 1680x1050,inactive,1680x1050 does function correctly. At boot, with KMS enabled, two of my three displays are active when the radeon module loads: DisplayPort-1 and one of the two DVI displays. If I use ctrl+alt+f1 to switch back to a console when I have my display configured to use DVI-1 and DVI-0, one of the DVI displays will enter power saving mode and DisplayPort-1 will turn back on. If I then use ctrl+alt+f7 to re-enter my desktop, DisplayPort-1 turns off leaving only one of the two DVI displays enabled. I'm also having trouble coming up with consistent use cases, as behaviour is not consistent. For example, I have tried configuring 1280x1024,1280x1024,1280x1024 for my displays, and have received inconsistent results; sometimes all displays function, other times I have had one of the three displays (including DisplayPort-1) enter power-saving mode. UPDATE: DisplayPort-1 is actually a U2211H, not UV22H -- Configure bugmail: https://bugs.freedesktop.org/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are the assignee for the bug. _______________________________________________ dri-devel mailing list dri-devel@xxxxxxxxxxxxxxxxxxxxx http://lists.freedesktop.org/mailman/listinfo/dri-devel
