New algo is used for r5xx+ and legacy is used for r1xx-r4xx, rv515. I've tested on all relevant GPUs and monitors that I have access to and have found no problems. Fixes: https://bugzilla.kernel.org/show_bug.cgi?id=26562 https://bugzilla.kernel.org/show_bug.cgi?id=26552 May fix: https://bugs.freedesktop.org/show_bug.cgi?id=32556 Signed-off-by: Alex Deucher <alexdeucher@xxxxxxxxx> Cc: stable@xxxxxxxxxx --- drivers/gpu/drm/radeon/atombios_crtc.c | 18 ++++++++++++++++-- drivers/gpu/drm/radeon/radeon_atombios.c | 10 ---------- drivers/gpu/drm/radeon/radeon_display.c | 3 +++ 3 files changed, 19 insertions(+), 12 deletions(-) diff --git a/drivers/gpu/drm/radeon/atombios_crtc.c b/drivers/gpu/drm/radeon/atombios_crtc.c index 4374168..b153700 100644 --- a/drivers/gpu/drm/radeon/atombios_crtc.c +++ b/drivers/gpu/drm/radeon/atombios_crtc.c @@ -555,6 +555,7 @@ static u32 atombios_adjust_pll(struct drm_crtc *crtc, dp_clock = dig_connector->dp_clock; } } +/* this might work properly with the new pll algo */ #if 0 /* doesn't work properly on some laptops */ /* use recommended ref_div for ss */ if (radeon_encoder->devices & (ATOM_DEVICE_LCD_SUPPORT)) { @@ -572,6 +573,11 @@ static u32 atombios_adjust_pll(struct drm_crtc *crtc, adjusted_clock = mode->clock * 2; if (radeon_encoder->active_device & (ATOM_DEVICE_TV_SUPPORT)) pll->flags |= RADEON_PLL_PREFER_CLOSEST_LOWER; + /* rv515 needs more testing with this option */ + if (rdev->family != CHIP_RV515) { + if (radeon_encoder->devices & (ATOM_DEVICE_LCD_SUPPORT)) + pll->flags |= RADEON_PLL_IS_LCD; + } } else { if (encoder->encoder_type != DRM_MODE_ENCODER_DAC) pll->flags |= RADEON_PLL_NO_ODD_POST_DIV; @@ -951,8 +957,16 @@ static void atombios_crtc_set_pll(struct drm_crtc *crtc, struct drm_display_mode /* adjust pixel clock as needed */ adjusted_clock = atombios_adjust_pll(crtc, mode, pll, ss_enabled, &ss); - radeon_compute_pll_legacy(pll, adjusted_clock, &pll_clock, &fb_div, &frac_fb_div, - &ref_div, &post_div); + /* rv515 seems happier with the old algo */ + if (rdev->family == CHIP_RV515) + radeon_compute_pll_legacy(pll, adjusted_clock, &pll_clock, &fb_div, &frac_fb_div, + &ref_div, &post_div); + else if (ASIC_IS_AVIVO(rdev)) + radeon_compute_pll_avivo(pll, adjusted_clock, &pll_clock, &fb_div, &frac_fb_div, + &ref_div, &post_div); + else + radeon_compute_pll_legacy(pll, adjusted_clock, &pll_clock, &fb_div, &frac_fb_div, + &ref_div, &post_div); atombios_crtc_program_ss(crtc, ATOM_DISABLE, radeon_crtc->pll_id, &ss); diff --git a/drivers/gpu/drm/radeon/radeon_atombios.c b/drivers/gpu/drm/radeon/radeon_atombios.c index 5277790..4dc9c51 100644 --- a/drivers/gpu/drm/radeon/radeon_atombios.c +++ b/drivers/gpu/drm/radeon/radeon_atombios.c @@ -1163,16 +1163,6 @@ bool radeon_atom_get_clock_info(struct drm_device *dev) p1pll->pll_out_min = 64800; else p1pll->pll_out_min = 20000; - } else if (p1pll->pll_out_min > 64800) { - /* Limiting the pll output range is a good thing generally as - * it limits the number of possible pll combinations for a given - * frequency presumably to the ones that work best on each card. - * However, certain duallink DVI monitors seem to like - * pll combinations that would be limited by this at least on - * pre-DCE 3.0 r6xx hardware. This might need to be adjusted per - * family. - */ - p1pll->pll_out_min = 64800; } p1pll->pll_in_min = diff --git a/drivers/gpu/drm/radeon/radeon_display.c b/drivers/gpu/drm/radeon/radeon_display.c index 5fda820..2eff98c 100644 --- a/drivers/gpu/drm/radeon/radeon_display.c +++ b/drivers/gpu/drm/radeon/radeon_display.c @@ -935,6 +935,9 @@ void radeon_compute_pll_legacy(struct radeon_pll *pll, pll_out_max = pll->pll_out_max; } + if (pll_out_min > 64800) + pll_out_min = 64800; + if (pll->flags & RADEON_PLL_USE_REF_DIV) min_ref_div = max_ref_div = pll->reference_div; else { -- 1.7.1.1 _______________________________________________ dri-devel mailing list dri-devel@xxxxxxxxxxxxxxxxxxxxx http://lists.freedesktop.org/mailman/listinfo/dri-devel
