Hi Alex, On Sun, 21 Nov 2010 19:57:23 -0500, Alex Deucher wrote: > On Sun, Nov 21, 2010 at 1:51 PM, Jean Delvare <khali@xxxxxxxxxxxx> wrote: > > On Sun, 21 Nov 2010 11:12:32 -0500, Alex Deucher wrote: > >> It's probably this patch: > >> http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commitdiff;h=f30df2fad0c901e74ac9a52a488a54c69a373a41 > > > > Your guess was correct: after applying the above patch to kernel > > 2.6.36, I get the same problem. > > > >> Which exposes a bug in the 3D driver in certain cases. For some > >> reason we get a cb height of 8192 or greater in some cases in the 3D > >> driver. I haven't had time to look into why. You might try r600g for > >> comparison. > > > > Not sure how to "try r600g"? > > It's a newer driver for r6xx+ hardware. Configure mesa > (http://cgit.freedesktop.org/mesa/mesa) with --enable-gallium-r600. Unfortunately the thing doesn't seem to be willing to build on my system :( It won't find talloc even though it is installed. I don't have more time to spend on this. > I actually talked to Dave earlier today, and the problem is more > likely a command buffer getting flushed at the wrong time leading to a > buffer without cb info in it. I think I'll just wait for you to come up with a fix :) I am in no hurry, I only use wine once in a while. Let me know if I can help with testing. -- Jean Delvare _______________________________________________ dri-devel mailing list dri-devel@xxxxxxxxxxxxxxxxxxxxx http://lists.freedesktop.org/mailman/listinfo/dri-devel
