https://bugs.freedesktop.org/show_bug.cgi?id=30076 --- Comment #1 from Mathieu Belanger <b747xx@xxxxxxxxx> 2010-09-07 22:35:23 PDT --- Initializing cgroup subsys cpuset Linux version 2.6.36-rc3-NX1-dirty (root@tanith) (gcc version 4.4.3 (Gentoo 4.4.3 p1.0) ) #4 SMP PREEMPT Tue Sep 7 19:31:22 EDT 2010 Command line: root=/dev/sda2 memory_corruption_check=0 clocksource=hpet radeon.modeset=1 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009f800 (usable) BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 00000000cfde0000 (usable) BIOS-e820: 00000000cfde0000 - 00000000cfde3000 (ACPI NVS) BIOS-e820: 00000000cfde3000 - 00000000cfdf0000 (ACPI data) BIOS-e820: 00000000cfdf0000 - 00000000cfe00000 (reserved) BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) BIOS-e820: 0000000100000000 - 0000000430000000 (usable) NX (Execute Disable) protection: active DMI 2.4 present. e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved) e820 remove range: 00000000000a0000 - 0000000000100000 (usable) No AGP bridge found last_pfn = 0x430000 max_arch_pfn = 0x400000000 MTRR default type: uncachable MTRR fixed ranges enabled: 00000-9FFFF write-back A0000-BFFFF uncachable C0000-C7FFF write-protect C8000-FFFFF uncachable MTRR variable ranges enabled: 0 base 000000000000 mask FFFF80000000 write-back 1 base 000080000000 mask FFFFC0000000 write-back 2 base 0000C0000000 mask FFFFF0000000 write-back 3 base 0000CFE00000 mask FFFFFFE00000 uncachable 4 base 000100000000 mask FFFF00000000 write-back 5 base 000200000000 mask FFFE00000000 write-back 6 base 000400000000 mask FFFFE0000000 write-back 7 base 000420000000 mask FFFFF0000000 write-back TOM2: 0000000430000000 aka 17152M x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 e820 update range: 00000000cfe00000 - 0000000100000000 (usable) ==> (reserved) last_pfn = 0xcfde0 max_arch_pfn = 0x400000000 initial memory mapped : 0 - 20000000 found SMP MP-table at [ffff8800000f58d0] f58d0 Using GB pages for direct mapping init_memory_mapping: 0000000000000000-00000000cfde0000 0000000000 - 00c0000000 page 1G 00c0000000 - 00cfc00000 page 2M 00cfc00000 - 00cfde0000 page 4k kernel direct mapping tables up to cfde0000 @ 8000-b000 init_memory_mapping: 0000000100000000-0000000430000000 0100000000 - 0400000000 page 1G 0400000000 - 0430000000 page 2M kernel direct mapping tables up to 430000000 @ a000-c000 ACPI: RSDP 00000000000f7270 00014 (v00 GBT ) ACPI: RSDT 00000000cfde3000 0003C (v01 GBT GBTUACPI 42302E31 GBTU 01010101) ACPI: FACP 00000000cfde3040 00074 (v01 GBT GBTUACPI 42302E31 GBTU 01010101) ACPI: DSDT 00000000cfde30c0 07299 (v01 GBT GBTUACPI 00001000 MSFT 03000000) ACPI: FACS 00000000cfde0000 00040 ACPI: SSDT 00000000cfdea440 0088C (v01 PTLTD POWERNOW 00000001 LTP 00000001) ACPI: HPET 00000000cfdead00 00038 (v01 GBT GBTUACPI 42302E31 GBTU 00000098) ACPI: MCFG 00000000cfdead40 0003C (v01 GBT GBTUACPI 42302E31 GBTU 01010101) ACPI: TAMG 00000000cfdead80 0030A (v01 GBT GBT B0 5455312E BG?? 53450101) ACPI: APIC 00000000cfdea380 00084 (v01 GBT GBTUACPI 42302E31 GBTU 01010101) ACPI: Local APIC address 0xfee00000 (12/32 early reservations) ==> bootmem [0000000000 - 0430000000] #0 [0001000000 - 00018f39a4] TEXT DATA BSS ==> [0001000000 - 00018f39a4] #1 [00018f4000 - 00018f40fe] BRK ==> [00018f4000 - 00018f40fe] #2 [00000f58e0 - 0000100000] BIOS reserved ==> [00000f58e0 - 0000100000] #3 [00000f58d0 - 00000f58e0] MP-table mpf ==> [00000f58d0 - 00000f58e0] #4 [000009f800 - 00000f0f00] BIOS reserved ==> [000009f800 - 00000f0f00] #5 [00000f108c - 00000f58d0] BIOS reserved ==> [00000f108c - 00000f58d0] #6 [00000f0f00 - 00000f108c] MP-table mpc ==> [00000f0f00 - 00000f108c] #7 [0000001000 - 0000003000] TRAMPOLINE ==> [0000001000 - 0000003000] #8 [0000003000 - 0000007000] ACPI WAKEUP ==> [0000003000 - 0000007000] #9 [0000008000 - 000000a000] PGTABLE ==> [0000008000 - 000000a000] #10 [000000a000 - 000000b000] PGTABLE ==> [000000a000 - 000000b000] #11 [000000b000 - 0000091000] BOOTMAP ==> [000000b000 - 0000091000] [ffffea0000000000-ffffea000ebfffff] PMD -> [ffff880028a00000-ffff880036bfffff] on node 0 Zone PFN ranges: DMA 0x00000001 -> 0x00001000 DMA32 0x00001000 -> 0x00100000 Normal 0x00100000 -> 0x00430000 Movable zone start PFN for each node early_node_map[3] active PFN ranges 0: 0x00000001 -> 0x0000009f 0: 0x00000100 -> 0x000cfde0 0: 0x00100000 -> 0x00430000 On node 0 totalpages: 4193662 DMA zone: 56 pages used for memmap DMA zone: 238 pages reserved DMA zone: 3704 pages, LIFO batch:0 DMA32 zone: 14280 pages used for memmap DMA32 zone: 833048 pages, LIFO batch:31 Normal zone: 45696 pages used for memmap Normal zone: 3296640 pages, LIFO batch:31 ACPI: PM-Timer IO Port: 0x4008 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled) ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1]) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Using ACPI (MADT) for SMP configuration information ACPI: HPET id: 0x10b9a201 base: 0xfed00000 SMP: Allowing 4 CPUs, 0 hotplug CPUs nr_irqs_gsi: 40 Allocating PCI resources starting at cfe00000 (gap: cfe00000:10200000) setup_percpu: NR_CPUS:4 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1 PERCPU: Embedded 27 pages/cpu @ffff880028200000 s78016 r8192 d24384 u524288 pcpu-alloc: s78016 r8192 d24384 u524288 alloc=1*2097152 pcpu-alloc: [0] 0 1 2 3 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 4133392 Kernel command line: root=/dev/sda2 memory_corruption_check=0 clocksource=hpet radeon.modeset=1 PID hash table entries: 4096 (order: 3, 32768 bytes) Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes) Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes) Checking aperture... No AGP bridge found Node 0: aperture @ 20000000 size 32 MB Aperture pointing to e820 RAM. Ignoring. Your BIOS doesn't leave a aperture memory hole Please enable the IOMMU option in the BIOS setup This costs you 64 MB of RAM Mapping aperture over 65536 KB of RAM @ 20000000 Memory: 16377252k/17563648k available (4466k kernel code, 789000k absent, 397396k reserved, 1957k data, 444k init) Hierarchical RCU implementation. Verbose stalled-CPUs detection is disabled. NR_IRQS:384 Console: colour VGA+ 80x25 console [tty0] enabled hpet clockevent registered Fast TSC calibration using PIT Detected 3220.365 MHz processor. Calibrating delay loop (skipped), value calculated using timer frequency.. 6440.72 BogoMIPS (lpj=3220361) pid_max: default: 32768 minimum: 301 Mount-cache hash table entries: 256 Initializing cgroup subsys ns Initializing cgroup subsys devices Initializing cgroup subsys freezer Initializing cgroup subsys blkio tseg: 00cfe00000 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 mce: CPU supports 6 MCE banks using C1E aware idle routine Performance Events: AMD PMU driver. ... version: 0 ... bit width: 48 ... generic registers: 4 ... value mask: 0000ffffffffffff ... max period: 00007fffffffffff ... fixed-purpose events: 0 ... event mask: 000000000000000f ACPI: Core revision 20100702 Setting APIC routing to flat ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 CPU0: AMD Phenom(tm) II X4 925 Processor stepping 02 System has AMD C1E enabled Switch to broadcast mode on CPU0 Booting Node 0, Processors #1 Switch to broadcast mode on CPU1 #2 Switch to broadcast mode on CPU2 #3 Ok. Brought up 4 CPUs Switch to broadcast mode on CPU3 Total of 4 processors activated (25760.59 BogoMIPS). xor: automatically using best checksumming function: generic_sse generic_sse: 12760.000 MB/sec xor: using function: generic_sse (12760.000 MB/sec) NET: Registered protocol family 16 node 0 link 0: io port [c000, ffff] TOM: 00000000d0000000 aka 3328M Fam 10h mmconf [e0000000, e00fffff] node 0 link 0: mmio [a0000, bffff] node 0 link 0: mmio [d0000000, dfffffff] node 0 link 0: mmio [f0000000, fe02ffff] node 0 link 0: mmio [e0000000, e03fffff] ==> [e0100000, e03fffff] TOM2: 0000000430000000 aka 17152M bus: [00, 03] on node 0 link 0 bus: 00 index 0 [io 0x0000-0xffff] bus: 00 index 1 [mem 0x000a0000-0x000bffff] bus: 00 index 2 [mem 0xd0000000-0xdfffffff] bus: 00 index 3 [mem 0xe0400000-0xffffffff] bus: 00 index 4 [mem 0xe0100000-0xe03fffff] bus: 00 index 5 [mem 0x430000000-0xfcffffffff] ACPI: bus type pci registered PCI: Using configuration type 1 for base access PCI: Using configuration type 1 for extended access bio: create slab <bio-0> at 0 raid6: int64x1 2808 MB/s raid6: int64x2 3609 MB/s raid6: int64x4 2828 MB/s raid6: int64x8 2746 MB/s raid6: sse2x1 4300 MB/s raid6: sse2x2 7082 MB/s raid6: sse2x4 7652 MB/s raid6: using algorithm sse2x4 (7652 MB/s) ACPI: EC: Look up EC in DSDT ACPI: Interpreter enabled ACPI: (supports S0 S3 S5) ACPI: Using IOAPIC for interrupt routing PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] pci_root PNP0A03:00: host bridge window [mem 0x000c0000-0x000dffff] pci_root PNP0A03:00: host bridge window [mem 0xcff00000-0xfebfffff] pci 0000:00:00.0: reg 1c: [mem 0xe0000000-0xffffffff 64bit] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold pci 0000:00:02.0: PME# disabled pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold pci 0000:00:0a.0: PME# disabled pci 0000:00:11.0: reg 10: [io 0xff00-0xff07] pci 0000:00:11.0: reg 14: [io 0xfe00-0xfe03] pci 0000:00:11.0: reg 18: [io 0xfd00-0xfd07] pci 0000:00:11.0: reg 1c: [io 0xfc00-0xfc03] pci 0000:00:11.0: reg 20: [io 0xfb00-0xfb0f] pci 0000:00:11.0: reg 24: [mem 0xfe02f000-0xfe02f3ff] pci 0000:00:12.0: reg 10: [mem 0xfe02e000-0xfe02efff] pci 0000:00:12.1: reg 10: [mem 0xfe02d000-0xfe02dfff] pci 0000:00:12.2: reg 10: [mem 0xfe02c000-0xfe02c0ff] pci 0000:00:12.2: supports D1 D2 pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot pci 0000:00:12.2: PME# disabled pci 0000:00:13.0: reg 10: [mem 0xfe02b000-0xfe02bfff] pci 0000:00:13.1: reg 10: [mem 0xfe02a000-0xfe02afff] pci 0000:00:13.2: reg 10: [mem 0xfe029000-0xfe0290ff] pci 0000:00:13.2: supports D1 D2 pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot pci 0000:00:13.2: PME# disabled pci 0000:00:14.1: reg 10: [io 0x0000-0x0007] pci 0000:00:14.1: reg 14: [io 0x0000-0x0003] pci 0000:00:14.1: reg 18: [io 0x0000-0x0007] pci 0000:00:14.1: reg 1c: [io 0x0000-0x0003] pci 0000:00:14.1: reg 20: [io 0xfa00-0xfa0f] pci 0000:00:14.5: reg 10: [mem 0xfe028000-0xfe028fff] pci 0000:01:00.0: reg 10: [mem 0xd0000000-0xdfffffff 64bit pref] pci 0000:01:00.0: reg 18: [mem 0xfdee0000-0xfdeeffff 64bit] pci 0000:01:00.0: reg 20: [io 0xee00-0xeeff] pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0001ffff pref] pci 0000:01:00.0: supports D1 D2 pci 0000:01:00.1: reg 10: [mem 0xfdefc000-0xfdefffff 64bit] pci 0000:01:00.1: supports D1 D2 pci 0000:00:02.0: PCI bridge to [bus 01-01] pci 0000:00:02.0: bridge window [io 0xe000-0xefff] pci 0000:00:02.0: bridge window [mem 0xfde00000-0xfdefffff] pci 0000:00:02.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref] pci 0000:02:00.0: reg 10: [io 0xde00-0xdeff] pci 0000:02:00.0: reg 18: [mem 0xfdfff000-0xfdffffff 64bit pref] pci 0000:02:00.0: reg 20: [mem 0xfdfe0000-0xfdfeffff 64bit pref] pci 0000:02:00.0: reg 30: [mem 0x00000000-0x0000ffff pref] pci 0000:02:00.0: supports D1 D2 pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:02:00.0: PME# disabled pci 0000:00:0a.0: PCI bridge to [bus 02-02] pci 0000:00:0a.0: bridge window [io 0xd000-0xdfff] pci 0000:00:0a.0: bridge window [mem 0xfdb00000-0xfdbfffff] pci 0000:00:0a.0: bridge window [mem 0xfdf00000-0xfdffffff 64bit pref] pci 0000:03:06.0: reg 10: [io 0xcf00-0xcf1f] pci 0000:03:06.0: supports D1 D2 pci 0000:03:06.1: reg 10: [io 0xce00-0xce07] pci 0000:03:06.1: supports D1 D2 pci 0000:03:0e.0: reg 10: [mem 0xfddff000-0xfddff7ff] pci 0000:03:0e.0: reg 14: [mem 0xfddf8000-0xfddfbfff] pci 0000:03:0e.0: supports D1 D2 pci 0000:03:0e.0: PME# supported from D0 D1 D2 D3hot pci 0000:03:0e.0: PME# disabled pci 0000:00:14.4: PCI bridge to [bus 03-03] (subtractive decode) pci 0000:00:14.4: bridge window [io 0xc000-0xcfff] pci 0000:00:14.4: bridge window [mem 0xfdd00000-0xfddfffff] pci 0000:00:14.4: bridge window [mem 0xfdc00000-0xfdcfffff pref] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7] (subtractive decode) pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode) pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) pci 0000:00:14.4: bridge window [mem 0x000c0000-0x000dffff] (subtractive decode) pci 0000:00:14.4: bridge window [mem 0xcff00000-0xfebfffff] (subtractive decode) pci_bus 0000:00: on NUMA node 0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE2._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCEA._PRT] Unable to assume PCIe control: Disabling ASPM ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11) *0, disabled. ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11) *0, disabled. ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11) *0, disabled. ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11) *0, disabled. ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11) *0, disabled. ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11) *0, disabled. ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 10 11) *0, disabled. ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 11) *0, disabled. vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none vgaarb: loaded SCSI subsystem initialized libata version 3.00 loaded. usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: Using ACPI for IRQ routing PCI: pci_cache_line_size set to 64 bytes pci 0000:00:00.0: no compatible bridge window for [mem 0xe0000000-0xffffffff 64bit] reserve RAM buffer: 000000000009f800 - 000000000009ffff reserve RAM buffer: 00000000cfde0000 - 00000000cfffffff hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0 hpet0: 4 comparators, 32-bit 14.318180 MHz counter Switching to clocksource hpet pnp: PnP ACPI init ACPI: bus type pnp registered pnp 00:02: disabling [mem 0x00000000-0x00000fff window] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit] pnp 00:02: disabling [mem 0x00000000-0x00000fff window disabled] because it overlaps 0000:01:00.0 BAR 6 [mem 0x00000000-0x0001ffff pref] pnp 00:02: disabling [mem 0x00000000-0x00000fff window disabled] because it overlaps 0000:02:00.0 BAR 6 [mem 0x00000000-0x0000ffff pref] pnp 00:0a: disabling [mem 0x000d1c00-0x000d3fff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit] pnp 00:0a: disabling [mem 0x000f0000-0x000f7fff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit] pnp 00:0a: disabling [mem 0x000f8000-0x000fbfff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit] pnp 00:0a: disabling [mem 0x000fc000-0x000fffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit] pnp 00:0a: disabling [mem 0x00000000-0x0009ffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit] pnp 00:0a: disabling [mem 0x00100000-0xcfddffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit] pnp: PnP ACPI: found 11 devices ACPI: ACPI bus type pnp unregistered system 00:01: [io 0x04d0-0x04d1] has been reserved system 00:01: [io 0x0220-0x0225] has been reserved system 00:01: [io 0x0290-0x0294] has been reserved system 00:02: [io 0x4100-0x411f] has been reserved system 00:02: [io 0x0228-0x022f] has been reserved system 00:02: [io 0x040b] has been reserved system 00:02: [io 0x04d6] has been reserved system 00:02: [io 0x0c00-0x0c01] has been reserved system 00:02: [io 0x0c14] has been reserved system 00:02: [io 0x0c50-0x0c52] has been reserved system 00:02: [io 0x0c6c-0x0c6d] has been reserved system 00:02: [io 0x0c6f] has been reserved system 00:02: [io 0x0cd0-0x0cd1] has been reserved system 00:02: [io 0x0cd2-0x0cd3] has been reserved system 00:02: [io 0x0cd4-0x0cdf] has been reserved system 00:02: [io 0x4000-0x40fe] has been reserved system 00:02: [io 0x4210-0x4217] has been reserved system 00:02: [io 0x0b00-0x0b0f] has been reserved system 00:02: [io 0x0b10-0x0b1f] has been reserved system 00:02: [io 0x0b20-0x0b3f] has been reserved system 00:02: [mem 0xfee00400-0xfee00fff window] has been reserved system 00:09: [mem 0xe0000000-0xefffffff] has been reserved system 00:0a: [mem 0xcfde0000-0xcfdfffff] could not be reserved system 00:0a: [mem 0xffff0000-0xffffffff] has been reserved system 00:0a: [mem 0xfec00000-0xfec00fff] could not be reserved system 00:0a: [mem 0xfee00000-0xfee00fff] could not be reserved system 00:0a: [mem 0xfff80000-0xfffeffff] has been reserved pci 0000:01:00.0: BAR 6: assigned [mem 0xfde00000-0xfde1ffff pref] pci 0000:00:02.0: PCI bridge to [bus 01-01] pci 0000:00:02.0: bridge window [io 0xe000-0xefff] pci 0000:00:02.0: bridge window [mem 0xfde00000-0xfdefffff] pci 0000:00:02.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref] pci 0000:02:00.0: BAR 6: assigned [mem 0xfdf00000-0xfdf0ffff pref] pci 0000:00:0a.0: PCI bridge to [bus 02-02] pci 0000:00:0a.0: bridge window [io 0xd000-0xdfff] pci 0000:00:0a.0: bridge window [mem 0xfdb00000-0xfdbfffff] pci 0000:00:0a.0: bridge window [mem 0xfdf00000-0xfdffffff 64bit pref] pci 0000:00:14.4: PCI bridge to [bus 03-03] pci 0000:00:14.4: bridge window [io 0xc000-0xcfff] pci 0000:00:14.4: bridge window [mem 0xfdd00000-0xfddfffff] pci 0000:00:14.4: bridge window [mem 0xfdc00000-0xfdcfffff pref] pci 0000:00:02.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 pci 0000:00:02.0: setting latency timer to 64 pci 0000:00:0a.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 pci 0000:00:0a.0: setting latency timer to 64 pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff] pci_bus 0000:00: resource 8 [mem 0xcff00000-0xfebfffff] pci_bus 0000:01: resource 0 [io 0xe000-0xefff] pci_bus 0000:01: resource 1 [mem 0xfde00000-0xfdefffff] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref] pci_bus 0000:02: resource 0 [io 0xd000-0xdfff] pci_bus 0000:02: resource 1 [mem 0xfdb00000-0xfdbfffff] pci_bus 0000:02: resource 2 [mem 0xfdf00000-0xfdffffff 64bit pref] pci_bus 0000:03: resource 0 [io 0xc000-0xcfff] pci_bus 0000:03: resource 1 [mem 0xfdd00000-0xfddfffff] pci_bus 0000:03: resource 2 [mem 0xfdc00000-0xfdcfffff pref] pci_bus 0000:03: resource 4 [io 0x0000-0x0cf7] pci_bus 0000:03: resource 5 [io 0x0d00-0xffff] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff] pci_bus 0000:03: resource 7 [mem 0x000c0000-0x000dffff] pci_bus 0000:03: resource 8 [mem 0xcff00000-0xfebfffff] NET: Registered protocol family 2 IP route cache hash table entries: 524288 (order: 10, 4194304 bytes) TCP established hash table entries: 262144 (order: 10, 4194304 bytes) TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) TCP: Hash tables configured (established 262144 bind 65536) TCP reno registered UDP hash table entries: 8192 (order: 6, 262144 bytes) UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes) CE: hpet increased min_delta_ns to 7500 nsec pci 0000:01:00.0: Boot video device PCI: CLS 4 bytes, default 64 PCI-DMA: Disabling AGP. PCI-DMA: aperture base @ 20000000 size 65536 KB PCI-DMA: using GART IOMMU. PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture VFS: Disk quotas dquot_6.5.2 Dquot-cache hash table entries: 512 (order 0, 4096 bytes) fuse init (API version 7.15) Btrfs loaded msgmni has been set to 32115 alg: No test for stdrng (krng) io scheduler noop registered io scheduler cfq registered (default) pcieport 0000:00:02.0: setting latency timer to 64 pcieport 0000:00:02.0: irq 40 for MSI/MSI-X pcieport 0000:00:0a.0: setting latency timer to 64 pcieport 0000:00:0a.0: irq 41 for MSI/MSI-X input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 ACPI: Power Button [PWRB] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 ACPI: Power Button [PWRF] ACPI: acpi_idle registered with cpuidle ACPI: processor limited to max C-state 1 Non-volatile memory driver v1.3 Serial: 8250/16550 driver, 8 ports, IRQ sharing enabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A brd: module loaded loop: module loaded ahci 0000:00:11.0: version 3.0 ahci 0000:00:11.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 ahci 0000:00:11.0: AHCI 0001.0100 32 slots 6 ports 3 Gbps 0x3f impl SATA mode ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc scsi0 : ahci scsi1 : ahci scsi2 : ahci scsi3 : ahci scsi4 : ahci scsi5 : ahci ata1: SATA max UDMA/133 irq_stat 0x00000040, cirq 22 ata2: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f180 irq 22 ata3: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f200 irq 22 ata4: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f280 irq 22 ata5: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f300 irq 22 ata6: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f380 irq 22 sky2: driver version 1.28 tun: Universal TUN/TAP device driver, 1.6 tun: (C) 1999-2004 Max Krasnyansky <maxk@xxxxxxxxxxxx> usbmon: debugfs is not available ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17 ehci_hcd 0000:00:12.2: EHCI Host Controller ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:12.2: debug port 1 ehci_hcd 0000:00:12.2: irq 17, io mem 0xfe02c000 ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00 hub 1-0:1.0: USB hub found hub 1-0:1.0: 6 ports detected ehci_hcd 0000:00:13.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 ehci_hcd 0000:00:13.2: EHCI Host Controller ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2 ehci_hcd 0000:00:13.2: debug port 1 ehci_hcd 0000:00:13.2: irq 19, io mem 0xfe029000 ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00 hub 2-0:1.0: USB hub found hub 2-0:1.0: 6 ports detected ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver ohci_hcd 0000:00:12.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 ohci_hcd 0000:00:12.0: OHCI Host Controller ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 3 ohci_hcd 0000:00:12.0: irq 16, io mem 0xfe02e000 hub 3-0:1.0: USB hub found hub 3-0:1.0: 3 ports detected ohci_hcd 0000:00:12.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16 ohci_hcd 0000:00:12.1: OHCI Host Controller ohci_hcd 0000:00:12.1: new USB bus registered, assigned bus number 4 ohci_hcd 0000:00:12.1: irq 16, io mem 0xfe02d000 hub 4-0:1.0: USB hub found hub 4-0:1.0: 3 ports detected ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 ohci_hcd 0000:00:13.0: OHCI Host Controller ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 5 ohci_hcd 0000:00:13.0: irq 18, io mem 0xfe02b000 hub 5-0:1.0: USB hub found hub 5-0:1.0: 3 ports detected ohci_hcd 0000:00:13.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18 ohci_hcd 0000:00:13.1: OHCI Host Controller ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 6 ohci_hcd 0000:00:13.1: irq 18, io mem 0xfe02a000 hub 6-0:1.0: USB hub found hub 6-0:1.0: 3 ports detected ohci_hcd 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18 ohci_hcd 0000:00:14.5: OHCI Host Controller ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 7 ohci_hcd 0000:00:14.5: irq 18, io mem 0xfe028000 hub 7-0:1.0: USB hub found hub 7-0:1.0: 2 ports detected uhci_hcd: USB Universal Host Controller Interface driver Initializing USB Mass Storage driver... usbcore: registered new interface driver usb-storage USB Mass Storage support registered. PNP: No PS/2 controller found. Probing ports directly. Failed to disable AUX port, but continuing anyway... Is this a SiS? If AUX port is really absent please use the 'i8042.noaux' option. ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata2.00: ATA-7: WDC WD800JD-60LSA0, 07.01D07, max UDMA/100 ata2.00: 156301488 sectors, multi 0: LBA48 ata3.00: ATA-8: WDC WD1001FALS-00J7B1, 05.00K05, max UDMA/133 ata4.00: ATA-8: WDC WD1001FALS-00J7B1, 05.00K05, max UDMA/133 ata5.00: ATA-8: WDC WD1001FALS-00J7B1, 05.00K05, max UDMA/133 ata4.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA ata5.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA ata3.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA ata2.00: configured for UDMA/100 ata4.00: configured for UDMA/133 ata5.00: configured for UDMA/133 ata3.00: configured for UDMA/133 ata6.00: ATAPI: HL-DT-ST BD-RE BH08LS20, 2.00, max UDMA/133 ata6.00: configured for UDMA/133 serio: i8042 KBD port at 0x60,0x64 irq 1 mice: PS/2 mouse device common for all mice rtc_cmos 00:05: RTC can wake from S4 rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0 rtc0: alarms up to one month, 242 bytes nvram, hpet irqs md: raid6 personality registered for level 6 md: raid5 personality registered for level 5 md: raid4 personality registered for level 4 device-mapper: ioctl: 4.18.0-ioctl (2010-06-29) initialised: dm-devel@xxxxxxxxxx cpuidle: using governor ladder usbcore: registered new interface driver hiddev usbcore: registered new interface driver usbhid usbhid: USB HID core driver Netfilter messages via NETLINK v0.30. nf_conntrack version 0.5.0 (16384 buckets, 65536 max) ctnetlink v0.93: registering with nfnetlink. xt_time: kernel timezone is -0000 IPv4 over IPv4 tunneling driver ip_tables: (C) 2000-2006 Netfilter Core Team ipt_CLUSTERIP: ClusterIP Version 0.8 loaded successfully arp_tables: (C) 2002 David S. Miller TCP cubic registered Bridge firewalling registered Ebtables v2.0 registered 802.1Q VLAN Support v1.8 Ben Greear <greearb@xxxxxxxxxxxxxxx> All bugs added by David S. Miller <davem@xxxxxxxxxx> rtc_cmos 00:05: setting system clock to 2010-09-07 19:38:19 UTC (1283888299) usb 3-2: new low speed USB device using ohci_hcd and address 2 input: Jing-Mold USB K/B as /devices/pci0000:00/0000:00:12.0/usb3/3-2/3-2:1.0/input/input2 generic-usb 0003:05AF:0802.0001: input,hidraw0: USB HID v1.00 Keyboard [Jing-Mold USB K/B] on usb-0000:00:12.0-2/input0 input: Jing-Mold USB K/B as /devices/pci0000:00/0000:00:12.0/usb3/3-2/3-2:1.1/input/input3 generic-usb 0003:05AF:0802.0002: input,hidraw1: USB HID v1.00 Device [Jing-Mold USB K/B] on usb-0000:00:12.0-2/input1 ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata1.00: ATA-7: WDC WD740ADFD-00NLR5, 21.07QR5, max UDMA/133 ata1.00: 145226112 sectors, multi 0: LBA48 NCQ (depth 31/32), AA ata1.00: configured for UDMA/133 scsi 0:0:0:0: Direct-Access ATA WDC WD740ADFD-00 21.0 PQ: 0 ANSI: 5 sd 0:0:0:0: [sda] 145226112 512-byte logical blocks: (74.3 GB/69.2 GiB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: Attached scsi generic sg0 type 0 scsi 1:0:0:0: Direct-Access ATA WDC WD800JD-60LS 07.0 PQ: 0 ANSI: 5 sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 1:0:0:0: [sdb] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB) sd 1:0:0:0: Attached scsi generic sg1 type 0 sd 1:0:0:0: [sdb] Write Protect is off sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 scsi 2:0:0:0: Direct-Access ATA WDC WD1001FALS-0 05.0 PQ: 0 ANSI: 5 sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 2:0:0:0: [sdc] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) sd 2:0:0:0: [sdc] Write Protect is off sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00 sd 2:0:0:0: Attached scsi generic sg2 type 0 sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA scsi 3:0:0:0: Direct-Access ATA WDC WD1001FALS-0 05.0 PQ: 0 ANSI: 5 sd 3:0:0:0: [sdd] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) sd 3:0:0:0: [sdd] Write Protect is off sd 3:0:0:0: [sdd] Mode Sense: 00 3a 00 00 sd 3:0:0:0: Attached scsi generic sg3 type 0 sd 3:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA scsi 4:0:0:0: Direct-Access ATA WDC WD1001FALS-0 05.0 PQ: 0 ANSI: 5 sd 4:0:0:0: [sde] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) sd 4:0:0:0: Attached scsi generic sg4 type 0 sd 4:0:0:0: [sde] Write Protect is off sd 4:0:0:0: [sde] Mode Sense: 00 3a 00 00 sd 4:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA scsi 5:0:0:0: CD-ROM HL-DT-ST BD-RE BH08LS20 2.00 PQ: 0 ANSI: 5 sda: sda1 sda2 sd 0:0:0:0: [sda] Attached SCSI disk sdd: sdd1 sd 3:0:0:0: [sdd] Attached SCSI disk sde: sde1 sd 4:0:0:0: [sde] Attached SCSI disk sdc: sdc1 sd 2:0:0:0: [sdc] Attached SCSI disk sdb: sdb1 sd 1:0:0:0: [sdb] Attached SCSI disk sr0: scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray cdrom: Uniform CD-ROM driver Revision: 3.20 sr 5:0:0:0: Attached scsi CD-ROM sr0 sr 5:0:0:0: Attached scsi generic sg5 type 5 md: Waiting for all devices to be available before autodetect md: If you don't use raid, use raid=noautodetect md: Autodetecting RAID arrays. md: invalid raid superblock magic on sdd1 md: sdd1 does not have a valid v0.90 superblock, not importing! usb 3-3: new low speed USB device using ohci_hcd and address 3 md: invalid raid superblock magic on sde1 md: sde1 does not have a valid v0.90 superblock, not importing! md: invalid raid superblock magic on sdc1 md: sdc1 does not have a valid v0.90 superblock, not importing! md: Scanned 3 and added 0 devices. md: autorun ... md: ... autorun DONE. device label MainFS devid 1 transid 602030 /dev/root input: Saitek PLC Saitek P2600 Rumble Force Pad as /devices/pci0000:00/0000:00:12.0/usb3/3-3/3-3:1.0/input/input4 generic-usb 0003:06A3:5F0D.0003: input,hidraw2: USB HID v1.10 Joystick [Saitek PLC Saitek P2600 Rumble Force Pad] on usb-0000:00:12.0-3/input0 usb 4-1: new low speed USB device using ohci_hcd and address 2 input: Logitech USB Receiver as /devices/pci0000:00/0000:00:12.1/usb4/4-1/4-1:1.0/input/input5 generic-usb 0003:046D:C50E.0004: input,hidraw3: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:12.1-1/input0 VFS: Mounted root (btrfs filesystem) readonly on device 0:11. Freeing unused kernel memory: 444k freed NET: Registered protocol family 1 udev: starting version 160 udevd (1406): /proc/1406/oom_adj is deprecated, please use /proc/1406/oom_score_adj instead. r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded r8169 0000:02:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 r8169 0000:02:00.0: setting latency timer to 64 r8169 0000:02:00.0: irq 42 for MSI/MSI-X r8169 0000:02:00.0: eth0: RTL8168c/8111c at 0xffffc9000012a000, 6c:f0:49:00:91:df, XID 1c4000c0 IRQ 42 input: PC Speaker as /devices/platform/pcspkr/input/input6 udev: renamed network interface eth0 to eth1 k10temp 0000:00:18.3: unreliable CPU thermal sensor; monitoring disabled firewire_ohci 0000:03:0e.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 firewire_ohci: Added fw-ohci device 0000:03:0e.0, OHCI v1.10, 4 IR + 8 IT contexts, quirks 0x2 gameport gameport0: EMU10K1 is pci0000:03:06.1/gameport0, io 0xce00, speed 657kHz [drm] Initialized drm 1.1.0 20060810 [drm] radeon kernel modesetting enabled. radeon 0000:01:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 radeon 0000:01:00.0: setting latency timer to 64 [drm] initializing kernel modesetting (RV770 0x1002:0x9440). [drm] register mmio base: 0xFDEE0000 [drm] register mmio size: 65536 ATOM BIOS: Wekiva [drm] Clocks initialized ! radeon 0000:01:00.0: VRAM: 512M 0x00000000 - 0x1FFFFFFF (512M used) radeon 0000:01:00.0: GTT: 512M 0x20000000 - 0x3FFFFFFF mtrr: your BIOS has configured an incorrect mask, fixing it. mtrr: your BIOS has configured an incorrect mask, fixing it. mtrr: no more MTRRs available [drm] Detected VRAM RAM=512M, BAR=256M [drm] RAM width 256bits DDR [TTM] Zone kernel: Available graphics memory: 8221824 kiB. [TTM] Zone dma32: Available graphics memory: 2097152 kiB. [TTM] Initializing pool allocator. [drm] radeon: 512M of VRAM memory ready [drm] radeon: 512M of GTT memory ready. radeon 0000:01:00.0: irq 43 for MSI/MSI-X radeon 0000:01:00.0: radeon: using MSI. [drm] radeon: irq initialized. [drm] GART: num cpu pages 131072, num gpu pages 131072 [drm] Loading RV770 Microcode EMU10K1_Audigy 0000:03:06.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 firewire_core: created device fw0: GUID 00e4eabe0000241d, S400 [drm] ring test succeeded in 1 usecs [drm] radeon: ib pool ready. [drm] ib test succeeded in 0 usecs [drm] Enabling audio support failed to evaluate ATIF got AE_BAD_PARAMETER [drm] Default TV standard: PAL [drm] Default TV standard: PAL [drm] Default TV standard: PAL [drm] Radeon Display Connectors [drm] Connector 0: [drm] DVI-I [drm] HPD2 [drm] DDC: 0x7e60 0x7e60 0x7e64 0x7e64 0x7e68 0x7e68 0x7e6c 0x7e6c [drm] Encoders: [drm] DFP1: INTERNAL_UNIPHY [drm] CRT2: INTERNAL_KLDSCP_DAC2 [drm] Connector 1: [drm] DIN [drm] Encoders: [drm] TV1: INTERNAL_KLDSCP_DAC2 [drm] Connector 2: [drm] DVI-I [drm] HPD1 [drm] DDC: 0x7e20 0x7e20 0x7e24 0x7e24 0x7e28 0x7e28 0x7e2c 0x7e2c [drm] Encoders: [drm] CRT1: INTERNAL_KLDSCP_DAC1 [drm] DFP2: INTERNAL_KLDSCP_LVTMA [drm] Internal thermal controller with fan control [drm] radeon: power management initialized [drm] fb mappable at 0xD0141000 [drm] vram apper at 0xD0000000 [drm] size 7258112 [drm] fb depth is 24 [drm] pitch is 6912 Console: switching to colour frame buffer device 210x65 fb0: radeondrmfb frame buffer device drm: registered panic notifier [drm] Initialized radeon 2.6.0 20080528 for 0000:01:00.0 on minor 0 btrfs: use compression r8169 0000:02:00.0: eth1: link up r8169 0000:02:00.0: eth1: link up NET: Registered protocol family 10 lo: Disabled Privacy Extensions tunl0: Disabled Privacy Extensions eth1: no IPv6 routers present md: md0 stopped. md: bind<sdd1> md: bind<sdc1> md: bind<sde1> md/raid:md0: device sde1 operational as raid disk 0 md/raid:md0: device sdc1 operational as raid disk 2 md/raid:md0: device sdd1 operational as raid disk 1 md/raid:md0: allocated 3222kB md/raid:md0: raid level 5 active with 3 out of 3 devices, algorithm 2 RAID conf printout: --- level:5 rd:3 wd:3 disk 0, o:1, dev:sde1 disk 1, o:1, dev:sdd1 disk 2, o:1, dev:sdc1 md0: detected capacity change from 0 to 2000404086784 md0: unknown partition table device label Data devid 1 transid 164277 /dev/md0 r8169 0000:02:00.0: eth1: link up NET: Registered protocol family 17 eth1: no IPv6 routers present usb 3-1: new full speed USB device using ohci_hcd and address 4 usb 3-1: USB disconnect, address 4 CE: hpet increased min_delta_ns to 11250 nsec [drm:radeon_dvi_detect] *ERROR* DVI-I-1: probed a monitor but no|invalid EDID usb 3-1: new full speed USB device using ohci_hcd and address 5 usb 3-1: USB disconnect, address 5 CE: hpet increased min_delta_ns to 16875 nsec usb 3-1: new full speed USB device using ohci_hcd and address 6 usb 3-1: USB disconnect, address 6 usb 3-1: new full speed USB device using ohci_hcd and address 7 usb 3-1: USB disconnect, address 7 -- Configure bugmail: https://bugs.freedesktop.org/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are the assignee for the bug. _______________________________________________ dri-devel mailing list dri-devel@xxxxxxxxxxxxxxxxxxxxx http://lists.freedesktop.org/mailman/listinfo/dri-devel
