https://bugs.freedesktop.org/show_bug.cgi?id=28671 --- Comment #15 from Brett Witherspoon <brett.witherspoon@xxxxxxxxxxx> 2010-06-26 13:03:58 PDT --- Created an attachment (id=36526) --> (https://bugs.freedesktop.org/attachment.cgi?id=36526) dmesg: first connector table patch Ok, gave this table a try. I had to fuzz a few lines to get the patch to apply to the 2.6.34 sources. I assume you must be working with some git branch. If it would be best that I use the same source your working with let me know. Attached is the dmesg. I noticed the connector_id is the same for both entries. Are we testing with just one connector? The drivers reports that there is nothing connected to the connector. I do not know how the Connector [0-1] are enumerated, but I was unable to connect a monitor to the ADT port as I don't have an adaptor yet. I ordered one though, so it should be here be the end of this next week. I do not know of anyway to determine which physical connector this would be and I assume if the dac,tmds or ddc lines or incorrect it might not be detected. Is this the case? Also if it is any use; the connectors appear to be DVI-D (Analog and Digital, Dual link) and of course the ADT one has some additional pins. -- Configure bugmail: https://bugs.freedesktop.org/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are the assignee for the bug. _______________________________________________ dri-devel mailing list dri-devel@xxxxxxxxxxxxxxxxxxxxx http://lists.freedesktop.org/mailman/listinfo/dri-devel
