Previous reset code leaded to computer hard lockup (need to unplug the power too reboot the computer) on various configuration. This patch change the reset code to avoid hard lockup. The GPU reset is failing most of the time but at least user can log in remotely or properly shutdown the computer. Two issues were leading to hard lockup : - Writting to the scratch register lead to hard lockup most likely because the write back mecanism is in fuzy state after GPU lockup. - Resetting the GPU memory controller and not reinitializing it after leaded to hard lockup. We did only reinitialize in case of successfull reset thus unsuccessfull reset quickly leaded to hard lockup. Signed-off-by: Jerome Glisse <jglisse@xxxxxxxxxx> --- drivers/gpu/drm/radeon/r300.c | 8 -------- drivers/gpu/drm/radeon/radeon_fence.c | 2 +- 2 files changed, 1 insertions(+), 9 deletions(-) diff --git a/drivers/gpu/drm/radeon/r300.c b/drivers/gpu/drm/radeon/r300.c index bb005bf..5d622cb 100644 --- a/drivers/gpu/drm/radeon/r300.c +++ b/drivers/gpu/drm/radeon/r300.c @@ -445,14 +445,6 @@ int r300_asic_reset(struct radeon_device *rdev) mdelay(1); status = RREG32(R_000E40_RBBM_STATUS); dev_info(rdev->dev, "(%s:%d) RBBM_STATUS=0x%08X\n", __func__, __LINE__, status); - /* reset MC */ - WREG32(R_0000F0_RBBM_SOFT_RESET, S_0000F0_SOFT_RESET_MC(1)); - RREG32(R_0000F0_RBBM_SOFT_RESET); - mdelay(500); - WREG32(R_0000F0_RBBM_SOFT_RESET, 0); - mdelay(1); - status = RREG32(R_000E40_RBBM_STATUS); - dev_info(rdev->dev, "(%s:%d) RBBM_STATUS=0x%08X\n", __func__, __LINE__, status); /* restore PCI & busmastering */ pci_restore_state(rdev->pdev); r100_enable_bm(rdev); diff --git a/drivers/gpu/drm/radeon/radeon_fence.c b/drivers/gpu/drm/radeon/radeon_fence.c index 1b8b9cc..b1f9a81 100644 --- a/drivers/gpu/drm/radeon/radeon_fence.c +++ b/drivers/gpu/drm/radeon/radeon_fence.c @@ -237,10 +237,10 @@ retry: * as signaled for now */ rdev->gpu_lockup = true; - WREG32(rdev->fence_drv.scratch_reg, fence->seq); r = radeon_gpu_reset(rdev); if (r) return r; + WREG32(rdev->fence_drv.scratch_reg, fence->seq); rdev->gpu_lockup = false; } timeout = RADEON_FENCE_JIFFIES_TIMEOUT; -- 1.7.0.1 _______________________________________________ dri-devel mailing list dri-devel@xxxxxxxxxxxxxxxxxxxxx http://lists.freedesktop.org/mailman/listinfo/dri-devel
