On Tue, 2010-04-20 at 11:38 -0500, Bridgman, John wrote: > There might be a clue in the dmesg output. > > This is looking less like a mesa dev issue - is there a better list for this ? I'll move it over to the dri-dev mailing list. Thanks > > -----Original Message----- > > From: Alex Buell [mailto:alex.buell at munted.org.uk] > > Sent: Tuesday, April 20, 2010 12:29 PM > > To: Bridgman, John > > Cc: mesa-dev at lists.freedesktop.org > > Subject: RE: [Mesa-dev] r128 problems on G3 iMac, X server locks up > > > > On Mon, 2010-04-19 at 16:58 -0500, Bridgman, John wrote: > > > Looks like the driver isn't finding enough memory for the > > offscreen > > > buffer. Maybe try 16-bit pixel depth instead of 24 ? > > > > That didn't work either. Here's the relevant lines found in > > Xorg.l0.log > > > > drmOpenDevice: node name is /dev/dri/card0 > > drmOpenDevice: open result is 8, (OK) > > drmOpenDevice: node name is /dev/dri/card0 > > drmOpenDevice: open result is 8, (OK) > > drmOpenByBusid: Searching for BusID pci:0000:00:10.0 > > drmOpenDevice: node name is /dev/dri/card0 > > drmOpenDevice: open result is 8, (OK) > > drmOpenByBusid: drmOpenMinor returns 8 > > drmOpenByBusid: drmGetBusid reports pci:0000:00:10.0 > > (II) [drm] DRM interface version 1.3 > > (II) [drm] DRM open master succeeded. > > (II) R128(0): [drm] Using the DRM lock SAREA also for drawables. > > (II) R128(0): [drm] framebuffer handle = 0x94000000 > > (II) R128(0): [drm] added 1 reserved context for kernel > > (II) R128(0): X context handle = 0x1 > > (II) R128(0): [drm] installed DRM signal handler > > (II) R128(0): [pci] 8192 kB allocated with handle 0xe47e2000 > > (II) R128(0): [pci] ring handle = 0xe47e2000 > > (II) R128(0): [pci] Ring mapped at 0x49050000 > > (II) R128(0): [pci] Ring contents 0x00000000 > > (II) R128(0): [pci] ring read ptr handle = 0xe48e3000 > > (II) R128(0): [pci] Ring read ptr mapped at 0x4802a000 > > (II) R128(0): [pci] Ring read ptr contents 0x00000000 > > (II) R128(0): [pci] vertex/indirect buffers handle = 0xe48e4000 > > (II) R128(0): [pci] Vertex/indirect buffers mapped at 0x49151000 > > (II) R128(0): [pci] Vertex/indirect buffers contents 0x00000000 > > (II) R128(0): [drm] register handle = 0x90000000 > > (II) R128(0): [dri] Visual configs initialized > > (II) R128(0): CCE in BM mode > > (II) R128(0): Using 8 MB AGP aperture > > (II) R128(0): Using 1 MB for the ring buffer > > (II) R128(0): Using 2 MB for vertex/indirect buffers > > (II) R128(0): Using 1 MB for AGP textures > > (II) R128(0): Memory manager initialized to (0,0) (1024,3840) > > (II) R128(0): Reserved area from (0,768) to (1024,770) > > (II) R128(0): Largest offscreen area available: 1024 x 3070 > > (II) R128(0): Reserved back buffer from (0,770) to (1024,1538) > > (II) R128(0): Reserved depth buffer from (0,1538) to (1024,2307) > > (II) R128(0): Reserved depth span from (0,2306) offset 0x481000 > > (II) R128(0): Reserved 8704 kb for textures at offset 0x780000 > > (**) R128(0): Option "XaaNoOffscreenPixmaps" > > (II) R128(0): Using XFree86 Acceleration Architecture (XAA) > > Screen to screen bit blits > > Solid filled rectangles > > 8x8 mono pattern filled rectangles > > Indirect CPU to Screen color expansion > > Solid Lines > > Dashed Lines > > Setting up tile and stipple cache: > > 32 128x128 slots > > 14 256x256 slots > > (II) R128(0): Acceleration enabled > > (==) R128(0): Backing store disabled > > (==) R128(0): Silken mouse enabled > > (II) R128(0): Using hardware cursor (scanline 4614) > > (II) R128(0): Largest offscreen area available: 1024 x 1531 > > (**) R128(0): DPMS enabled > > (II) R128(0): [DRI] installation complete > > (EE) R128(0): R128DRICloseScreen: CCE stop -22 > > (II) R128(0): [drm] removed 1 reserved context for kernel > > (II) R128(0): [drm] unmapping 8192 bytes of SAREA 0xe1065000 > > at 0x48028000 > > (II) R128(0): [drm] Closed DRM master. > > (WW) R128(0): Direct rendering disabled > > (==) RandR enabled > > > > At this point it closes the DRM, as it get a CCE stop -22. > > What does that error means? > > > > (II) AIGLX: Screen 0 is not DRI2 capable > > (II) AIGLX: Screen 0 is not DRI capable > > (II) AIGLX: Loaded and initialized /usr/lib/dri/swrast_dri.so > > (II) GLX: Initialized DRISWRAST GL provider for screen 0 > > (EE) R128(0): R128CCEWaitForIdle: CCE idle -9 > > (EE) R128(0): Idle timed out, resetting engine... > > (EE) R128(0): R128CCEWaitForIdle: CCE stop -9 > > (EE) R128(0): R128CCEWaitForIdle: CCE start -9 > > (EE) R128(0): R128CCEWaitForIdle: CCE idle -9 > > (EE) R128(0): Idle timed out, resetting engine... > > > > At this point it repeats the last six lines again and again > > and again... > > > > Any ideas? > > > > -- > > http://www.munted.org.uk > > > > One very high maintenance cat living here. > > > > -- http://www.munted.org.uk One very high maintenance cat living here.
