On Wed, Jan 29, 2025 at 06:01:04PM -0500, Frank Li wrote: > On Sun, Jan 26, 2025 at 07:59:04PM +0100, J. Neuschäfer wrote: > > Convert the Freescale localbus controller bindings from text form to > > YAML. The list of compatible strings reflects current usage. > > > > Changes compared to the txt version: > > - removed the board-control (fsl,mpc8272ads-bcsr) node because it only > > appears in this example and nowhere else > > - added a new example with NAND flash > > > > Remaining issues: > > - The localbus is not really a simple-bus: Unit addresses are not simply > > addresses on a memory bus. Instead, they have a format: The first cell > > is a chip select number, the remaining one or two cells are bus > > addresses. > > > > Signed-off-by: J. Neuschäfer <j.ne@xxxxxxxxxx> > > --- > > .../devicetree/bindings/mtd/fsl,elbc-fcm-nand.yaml | 61 +++++++++ > > .../bindings/powerpc/fsl/fsl,elbc-gpcm-uio.yaml | 55 ++++++++ > > .../devicetree/bindings/powerpc/fsl/fsl,elbc.yaml | 150 +++++++++++++++++++++ > > .../devicetree/bindings/powerpc/fsl/lbc.txt | 43 ------ > > 4 files changed, 266 insertions(+), 43 deletions(-) > > > > diff --git a/Documentation/devicetree/bindings/mtd/fsl,elbc-fcm-nand.yaml b/Documentation/devicetree/bindings/mtd/fsl,elbc-fcm-nand.yaml [...] > > + "#address-cells": true > > should limit to a number set like > > - const: 2 Will do > > + > > + "#size-cells": true > > the same as #address-cells. Will do Thanks, J. Neuschäfer
