From: Durai Manickam KR <durai.manickamkr@xxxxxxxxxxxxx> Add a description, required properties, appropriate compatibles and missing properties like clocks and clock-names which are not defined in the text binding for all the SoCs that are supported by microchip. Update the text binding name `atmel-dma.txt` to `atmel,at91sam9g45-dma.yaml` for the files which reference to `atmel-dma.txt`. Drop Tudor name from maintainers. Signed-off-by: Durai Manickam KR <durai.manickamkr@xxxxxxxxxxxxx> Signed-off-by: Charan Pedumuru <charan.pedumuru@xxxxxxxxxxxxx> --- Changes in v3: - Renamed the text binding name `atmel-dma.txt` to `atmel,at91sam9g45-dma.yaml` for the files which reference to `atmel-dma.txt`. - Removed `oneOf` and add a blank line in properties. - Dropped Tudor name from maintainers. - Link to v2: https://lore.kernel.org/r/20250123-dma-v1-1-054f1a77e733@xxxxxxxxxxxxx Changes in v2: - Renamed the yaml file to a compatible. - Removed `|` and description for common properties. - Modified the commit message. - Dropped the label for the node in examples. - Link to v1: https://lore.kernel.org/all/20240215-dmac-v1-1-8f1c6f031c98@xxxxxxxxxxxxx --- .../bindings/dma/atmel,at91sam9g45-dma.yaml | 66 ++++++++++++++++++++++ .../devicetree/bindings/dma/atmel-dma.txt | 42 -------------- .../devicetree/bindings/misc/atmel-ssc.txt | 2 +- MAINTAINERS | 2 +- 4 files changed, 68 insertions(+), 44 deletions(-) diff --git a/Documentation/devicetree/bindings/dma/atmel,at91sam9g45-dma.yaml b/Documentation/devicetree/bindings/dma/atmel,at91sam9g45-dma.yaml new file mode 100644 index 000000000000..d6d16869b7db --- /dev/null +++ b/Documentation/devicetree/bindings/dma/atmel,at91sam9g45-dma.yaml @@ -0,0 +1,66 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/dma/atmel,at91sam9g45-dma.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Atmel Direct Memory Access Controller (DMA) + +maintainers: + - Ludovic Desroches <ludovic.desroches@xxxxxxxxxxxxx> + +description: + The Atmel Direct Memory Access Controller (DMAC) transfers data from a source + peripheral to a destination peripheral over one or more AMBA buses. One channel + is required for each source/destination pair. In the most basic configuration, + the DMAC has one master interface and one channel. The master interface reads + the data from a source and writes it to a destination. Two AMBA transfers are + required for each DMAC data transfer. This is also known as a dual-access transfer. + The DMAC is programmed via the APB interface. + +properties: + compatible: + enum: + - atmel,at91sam9g45-dma + - atmel,at91sam9rl-dma + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + "#dma-cells": + description: + Must be <2>, used to represent the number of integer cells in the dmas + property of client devices. + const: 2 + + clocks: + maxItems: 1 + + clock-names: + const: dma_clk + +required: + - compatible + - reg + - interrupts + - "#dma-cells" + - clocks + - clock-names + +additionalProperties: false + +examples: + - | + dma-controller@ffffec00 { + compatible = "atmel,at91sam9g45-dma"; + reg = <0xffffec00 0x200>; + interrupts = <21>; + #dma-cells = <2>; + clocks = <&pmc 2 20>; + clock-names = "dma_clk"; + }; + +... diff --git a/Documentation/devicetree/bindings/dma/atmel-dma.txt b/Documentation/devicetree/bindings/dma/atmel-dma.txt deleted file mode 100644 index f69bcf5a6343..000000000000 --- a/Documentation/devicetree/bindings/dma/atmel-dma.txt +++ /dev/null @@ -1,42 +0,0 @@ -* Atmel Direct Memory Access Controller (DMA) - -Required properties: -- compatible: Should be "atmel,<chip>-dma". -- reg: Should contain DMA registers location and length. -- interrupts: Should contain DMA interrupt. -- #dma-cells: Must be <2>, used to represent the number of integer cells in -the dmas property of client devices. - -Example: - -dma0: dma@ffffec00 { - compatible = "atmel,at91sam9g45-dma"; - reg = <0xffffec00 0x200>; - interrupts = <21>; - #dma-cells = <2>; -}; - -DMA clients connected to the Atmel DMA controller must use the format -described in the dma.txt file, using a three-cell specifier for each channel: -a phandle plus two integer cells. -The three cells in order are: - -1. A phandle pointing to the DMA controller. -2. The memory interface (16 most significant bits), the peripheral interface -(16 less significant bits). -3. Parameters for the at91 DMA configuration register which are device -dependent: - - bit 7-0: peripheral identifier for the hardware handshaking interface. The - identifier can be different for tx and rx. - - bit 11-8: FIFO configuration. 0 for half FIFO, 1 for ALAP, 2 for ASAP. - -Example: - -i2c0@i2c@f8010000 { - compatible = "atmel,at91sam9x5-i2c"; - reg = <0xf8010000 0x100>; - interrupts = <9 4 6>; - dmas = <&dma0 1 7>, - <&dma0 1 8>; - dma-names = "tx", "rx"; -}; diff --git a/Documentation/devicetree/bindings/misc/atmel-ssc.txt b/Documentation/devicetree/bindings/misc/atmel-ssc.txt index f9fb412642fe..b159dc2298b6 100644 --- a/Documentation/devicetree/bindings/misc/atmel-ssc.txt +++ b/Documentation/devicetree/bindings/misc/atmel-ssc.txt @@ -14,7 +14,7 @@ Required properties: Required properties for devices compatible with "atmel,at91sam9g45-ssc": - dmas: DMA specifier, consisting of a phandle to DMA controller node, the memory interface and SSC DMA channel ID (for tx and rx). - See Documentation/devicetree/bindings/dma/atmel-dma.txt for details. + See Documentation/devicetree/bindings/dma/atmel,at91sam9g45-dma.yaml for details. - dma-names: Must be "tx", "rx". Optional properties: diff --git a/MAINTAINERS b/MAINTAINERS index 962eab2ce359..f1f4e3956f45 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -15348,7 +15348,7 @@ M: Ludovic Desroches <ludovic.desroches@xxxxxxxxxxxxx> L: linux-arm-kernel@xxxxxxxxxxxxxxxxxxx (moderated for non-subscribers) L: dmaengine@xxxxxxxxxxxxxxx S: Supported -F: Documentation/devicetree/bindings/dma/atmel-dma.txt +F: Documentation/devicetree/bindings/dma/atmel,at91sam9g45-dma.yaml F: drivers/dma/at_hdmac.c F: drivers/dma/at_xdmac.c F: include/dt-bindings/dma/at91.h --- base-commit: 232f121837ad8b1c21cc80f2c8842a4090c5a2a0 change-id: 20250127-test-80e5c48cf747 Best regards, -- Charan Pedumuru <charan.pedumuru@xxxxxxxxxxxxx>
