Replace ternary (condition ? "enable" : "disable") syntax with helpers from string_choices.h because: 1. Simple function call with one argument is easier to read. Ternary operator has three arguments and with wrapping might lead to quite long code. 2. Is slightly shorter thus also easier to read. 3. It brings uniformity in the text - same string. 4. Allows deduping by the linker, which results in a smaller binary file. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx> --- drivers/dma/imx-dma.c | 3 ++- drivers/dma/pxa_dma.c | 4 ++-- drivers/dma/ti/edma.c | 3 ++- drivers/dma/xilinx/xilinx_dma.c | 3 ++- 4 files changed, 8 insertions(+), 5 deletions(-) diff --git a/drivers/dma/imx-dma.c b/drivers/dma/imx-dma.c index a651e0995ce8..de8d7070904e 100644 --- a/drivers/dma/imx-dma.c +++ b/drivers/dma/imx-dma.c @@ -17,6 +17,7 @@ #include <linux/device.h> #include <linux/dma-mapping.h> #include <linux/slab.h> +#include <linux/string_choices.h> #include <linux/platform_device.h> #include <linux/clk.h> #include <linux/dmaengine.h> @@ -942,7 +943,7 @@ static struct dma_async_tx_descriptor *imxdma_prep_dma_interleaved( " src_sgl=%s dst_sgl=%s numf=%zu frame_size=%zu\n", __func__, imxdmac->channel, (unsigned long long)xt->src_start, (unsigned long long) xt->dst_start, - xt->src_sgl ? "true" : "false", xt->dst_sgl ? "true" : "false", + str_true_false(xt->src_sgl), str_true_false(xt->dst_sgl), xt->numf, xt->frame_size); if (list_empty(&imxdmac->ld_free) || diff --git a/drivers/dma/pxa_dma.c b/drivers/dma/pxa_dma.c index e50cf3357e5e..249296389771 100644 --- a/drivers/dma/pxa_dma.c +++ b/drivers/dma/pxa_dma.c @@ -10,6 +10,7 @@ #include <linux/interrupt.h> #include <linux/dma-mapping.h> #include <linux/slab.h> +#include <linux/string_choices.h> #include <linux/dmaengine.h> #include <linux/platform_device.h> #include <linux/device.h> @@ -277,8 +278,7 @@ static int chan_state_show(struct seq_file *s, void *p) seq_printf(s, "\tPriority : %s\n", str_prio[(phy->idx & 0xf) / 4]); seq_printf(s, "\tUnaligned transfer bit: %s\n", - _phy_readl_relaxed(phy, DALGN) & BIT(phy->idx) ? - "yes" : "no"); + str_yes_no(_phy_readl_relaxed(phy, DALGN) & BIT(phy->idx))); seq_printf(s, "\tDCSR = %08x (%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s)\n", dcsr, PXA_DCSR_STR(RUN), PXA_DCSR_STR(NODESC), PXA_DCSR_STR(STOPIRQEN), PXA_DCSR_STR(EORIRQEN), diff --git a/drivers/dma/ti/edma.c b/drivers/dma/ti/edma.c index 4ece125b2ae7..b1a54655e6ce 100644 --- a/drivers/dma/ti/edma.c +++ b/drivers/dma/ti/edma.c @@ -16,6 +16,7 @@ #include <linux/platform_device.h> #include <linux/slab.h> #include <linux/spinlock.h> +#include <linux/string_choices.h> #include <linux/of.h> #include <linux/of_dma.h> #include <linux/of_irq.h> @@ -2047,7 +2048,7 @@ static int edma_setup_from_hw(struct device *dev, struct edma_soc_info *pdata, dev_dbg(dev, "num_qchannels: %u\n", ecc->num_qchannels); dev_dbg(dev, "num_slots: %u\n", ecc->num_slots); dev_dbg(dev, "num_tc: %u\n", ecc->num_tc); - dev_dbg(dev, "chmap_exist: %s\n", ecc->chmap_exist ? "yes" : "no"); + dev_dbg(dev, "chmap_exist: %s\n", str_yes_no(ecc->chmap_exist)); /* Nothing need to be done if queue priority is provided */ if (pdata->queue_priority_mapping) diff --git a/drivers/dma/xilinx/xilinx_dma.c b/drivers/dma/xilinx/xilinx_dma.c index 108a7287f4cd..3ad44afd0e74 100644 --- a/drivers/dma/xilinx/xilinx_dma.c +++ b/drivers/dma/xilinx/xilinx_dma.c @@ -46,6 +46,7 @@ #include <linux/of_irq.h> #include <linux/platform_device.h> #include <linux/slab.h> +#include <linux/string_choices.h> #include <linux/clk.h> #include <linux/io-64-nonatomic-lo-hi.h> @@ -2940,7 +2941,7 @@ static int xilinx_dma_chan_probe(struct xilinx_dma_device *xdev, XILINX_DMA_DMASR_SG_MASK) chan->has_sg = true; dev_dbg(chan->dev, "ch %d: SG %s\n", chan->id, - chan->has_sg ? "enabled" : "disabled"); + str_enabled_disabled(chan->has_sg)); } /* Initialize the tasklet */ -- 2.43.0
