Hello Jai,
On Wed, Sep 18, 2024 at 06:46:55PM +0530, Jai Luthra wrote:
> From: Jai Luthra <j-luthra@xxxxxx>
>
> When receiving data in cyclic mode from PDMA peripherals, where reload
> count is set to infinite, any TR in the set can potentially be the last
> one of the overall transfer. In such cases, the EOP flag needs to be set
> in each TR and PDMA's Static TR "Z" parameter should be set, matching
> the size of the TR.
>
> This is required for the teardown to function properly and cleanup the
> internal state memory. This only affects platforms using BCDMA and not
> those using UDMA-P, which could set EOP flag in the teardown TR
> automatically.
>
> Similarly when transmitting data in cyclic mode to PDMA peripherals, the
> EOP flag needs to be set to get the teardown completion signal
> correctly.
>
> Fixes: 017794739702 ("dmaengine: ti: k3-udma: Initial support for K3 BCDMA")
> Signed-off-by: Jai Luthra <j-luthra@xxxxxx>
> Signed-off-by: Jai Luthra <jai.luthra@xxxxxxxxx>
Thanks for this, really appreciated!
I did test this patch on top of v6.11, before I had errors every
time I was doing some recording, (e.g. `arecord -D hw:0,0 -c 2 -f S16_LE
-r 44100 -t wav -d 16 /tmp/a.wav`)
[ 63.906602] ti-udma 485c0100.dma-controller: chan2 teardown timeout!
[ 64.090472] davinci-mcasp 2b00000.audio-controller: Receive buffer overflow
[ 65.409909] ti-udma 485c0100.dma-controller: chan2 teardown timeout!
In addition to that I used to have system crashes afterward, but today
it seems that this is not happening with v6.11.
I think that this should go explicitly to stable, so I would add
Cc:stable in your v2 (that I assume you need to send to address some
review comment from Péter).
With all of that said
Tested-by: Francesco Dolcini <francesco.dolcini@xxxxxxxxxxx # Toradex Verdin AM62
Francesco
