Re: [PATCH V2] dmaengine: Fix spelling mistakes

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On 8/17/24 1:04 AM, Amit Vadhavana wrote:
> Correct spelling mistakes in the DMA engine to improve readability
> and clarity without altering functionality.
> 
> Signed-off-by: Amit Vadhavana <av2082000@xxxxxxxxx>
> Reviewed-by: Kees Cook <kees@xxxxxxxxxx>

Reviewed-by: Dave Jiang <dave.jiang@xxxxxxxxx>

For idxd and ioat

> ---
> V1: https://lore.kernel.org/all/20240810184333.34859-1-av2082000@xxxxxxxxx 
> V1 -> V2:
> - Write the commit description in imperative mode.
> ---
>  drivers/dma/acpi-dma.c                  | 4 ++--
>  drivers/dma/altera-msgdma.c             | 4 ++--
>  drivers/dma/amba-pl08x.c                | 2 +-
>  drivers/dma/at_hdmac.c                  | 6 +++---
>  drivers/dma/bcm-sba-raid.c              | 4 ++--
>  drivers/dma/bcm2835-dma.c               | 2 +-
>  drivers/dma/ep93xx_dma.c                | 4 ++--
>  drivers/dma/fsl-dpaa2-qdma/dpaa2-qdma.h | 6 +++---
>  drivers/dma/hisi_dma.c                  | 2 +-
>  drivers/dma/idma64.c                    | 4 ++--
>  drivers/dma/idxd/submit.c               | 2 +-
>  drivers/dma/ioat/init.c                 | 2 +-
>  drivers/dma/lgm/lgm-dma.c               | 2 +-
>  drivers/dma/ls2x-apb-dma.c              | 4 ++--
>  drivers/dma/mediatek/mtk-cqdma.c        | 4 ++--
>  drivers/dma/mediatek/mtk-hsdma.c        | 2 +-
>  drivers/dma/mv_xor.c                    | 4 ++--
>  drivers/dma/mv_xor.h                    | 2 +-
>  drivers/dma/mv_xor_v2.c                 | 2 +-
>  drivers/dma/nbpfaxi.c                   | 2 +-
>  drivers/dma/of-dma.c                    | 4 ++--
>  drivers/dma/owl-dma.c                   | 2 +-
>  drivers/dma/ppc4xx/adma.c               | 2 +-
>  drivers/dma/ppc4xx/dma.h                | 2 +-
>  drivers/dma/ptdma/ptdma.h               | 2 +-
>  drivers/dma/qcom/bam_dma.c              | 4 ++--
>  drivers/dma/qcom/gpi.c                  | 2 +-
>  drivers/dma/qcom/qcom_adm.c             | 2 +-
>  drivers/dma/sh/shdmac.c                 | 2 +-
>  drivers/dma/ste_dma40.h                 | 2 +-
>  drivers/dma/ste_dma40_ll.h              | 2 +-
>  drivers/dma/tegra20-apb-dma.c           | 2 +-
>  drivers/dma/xgene-dma.c                 | 2 +-
>  drivers/dma/xilinx/xilinx_dpdma.c       | 4 ++--
>  34 files changed, 49 insertions(+), 49 deletions(-)
> 
> diff --git a/drivers/dma/acpi-dma.c b/drivers/dma/acpi-dma.c
> index 5906eae26e2a..a58a1600dd65 100644
> --- a/drivers/dma/acpi-dma.c
> +++ b/drivers/dma/acpi-dma.c
> @@ -112,7 +112,7 @@ static int acpi_dma_parse_resource_group(const struct acpi_csrt_group *grp,
>  }
>  
>  /**
> - * acpi_dma_parse_csrt - parse CSRT to exctract additional DMA resources
> + * acpi_dma_parse_csrt - parse CSRT to extract additional DMA resources
>   * @adev:	ACPI device to match with
>   * @adma:	struct acpi_dma of the given DMA controller
>   *
> @@ -305,7 +305,7 @@ EXPORT_SYMBOL_GPL(devm_acpi_dma_controller_free);
>   * found.
>   *
>   * Return:
> - * 0, if no information is avaiable, -1 on mismatch, and 1 otherwise.
> + * 0, if no information is available, -1 on mismatch, and 1 otherwise.
>   */
>  static int acpi_dma_update_dma_spec(struct acpi_dma *adma,
>  		struct acpi_dma_spec *dma_spec)
> diff --git a/drivers/dma/altera-msgdma.c b/drivers/dma/altera-msgdma.c
> index 0968176f323d..e6a6566b309e 100644
> --- a/drivers/dma/altera-msgdma.c
> +++ b/drivers/dma/altera-msgdma.c
> @@ -153,7 +153,7 @@ struct msgdma_extended_desc {
>  /**
>   * struct msgdma_sw_desc - implements a sw descriptor
>   * @async_tx: support for the async_tx api
> - * @hw_desc: assosiated HW descriptor
> + * @hw_desc: associated HW descriptor
>   * @node: node to move from the free list to the tx list
>   * @tx_list: transmit list node
>   */
> @@ -511,7 +511,7 @@ static void msgdma_copy_one(struct msgdma_device *mdev,
>  	 * of the DMA controller. The descriptor will get flushed to the
>  	 * FIFO, once the last word (control word) is written. Since we
>  	 * are not 100% sure that memcpy() writes all word in the "correct"
> -	 * oder (address from low to high) on all architectures, we make
> +	 * order (address from low to high) on all architectures, we make
>  	 * sure this control word is written last by single coding it and
>  	 * adding some write-barriers here.
>  	 */
> diff --git a/drivers/dma/amba-pl08x.c b/drivers/dma/amba-pl08x.c
> index 73a5cfb4da8a..38cdbca59485 100644
> --- a/drivers/dma/amba-pl08x.c
> +++ b/drivers/dma/amba-pl08x.c
> @@ -2,7 +2,7 @@
>  /*
>   * Copyright (c) 2006 ARM Ltd.
>   * Copyright (c) 2010 ST-Ericsson SA
> - * Copyirght (c) 2017 Linaro Ltd.
> + * Copyright (c) 2017 Linaro Ltd.
>   *
>   * Author: Peter Pearse <peter.pearse@xxxxxxx>
>   * Author: Linus Walleij <linus.walleij@xxxxxxxxxx>
> diff --git a/drivers/dma/at_hdmac.c b/drivers/dma/at_hdmac.c
> index 40052d1bd0b5..baebddc740b0 100644
> --- a/drivers/dma/at_hdmac.c
> +++ b/drivers/dma/at_hdmac.c
> @@ -339,7 +339,7 @@ static inline u8 convert_buswidth(enum dma_slave_buswidth addr_width)
>   * @regs: memory mapped register base
>   * @clk: dma controller clock
>   * @save_imr: interrupt mask register that is saved on suspend/resume cycle
> - * @all_chan_mask: all channels availlable in a mask
> + * @all_chan_mask: all channels available in a mask
>   * @lli_pool: hw lli table
>   * @memset_pool: hw memset pool
>   * @chan: channels table to store at_dma_chan structures
> @@ -668,7 +668,7 @@ static inline u32 atc_calc_bytes_left(u32 current_len, u32 ctrla)
>   * CTRLA is read in turn, next the DSCR is read a second time. If the two
>   * consecutive read values of the DSCR are the same then we assume both refers
>   * to the very same LLI as well as the CTRLA value read inbetween does. For
> - * cyclic tranfers, the assumption is that a full loop is "not so fast". If the
> + * cyclic transfers, the assumption is that a full loop is "not so fast". If the
>   * two DSCR values are different, we read again the CTRLA then the DSCR till two
>   * consecutive read values from DSCR are equal or till the maximum trials is
>   * reach. This algorithm is very unlikely not to find a stable value for DSCR.
> @@ -700,7 +700,7 @@ static int atc_get_llis_residue(struct at_dma_chan *atchan,
>  			break;
>  
>  		/*
> -		 * DSCR has changed inside the DMA controller, so the previouly
> +		 * DSCR has changed inside the DMA controller, so the previously
>  		 * read value of CTRLA may refer to an already processed
>  		 * descriptor hence could be outdated. We need to update ctrla
>  		 * to match the current descriptor.
> diff --git a/drivers/dma/bcm-sba-raid.c b/drivers/dma/bcm-sba-raid.c
> index fbaacb4c19b2..cfa6e1167a1f 100644
> --- a/drivers/dma/bcm-sba-raid.c
> +++ b/drivers/dma/bcm-sba-raid.c
> @@ -15,7 +15,7 @@
>   * number of hardware rings over one or more SBA hardware devices. By
>   * design, the internal buffer size of SBA hardware device is limited
>   * but all offload operations supported by SBA can be broken down into
> - * multiple small size requests and executed parallely on multiple SBA
> + * multiple small size requests and executed parallelly on multiple SBA
>   * hardware devices for achieving high through-put.
>   *
>   * The Broadcom SBA RAID driver does not require any register programming
> @@ -135,7 +135,7 @@ struct sba_device {
>  	u32 max_xor_srcs;
>  	u32 max_resp_pool_size;
>  	u32 max_cmds_pool_size;
> -	/* Maibox client and Mailbox channels */
> +	/* Mailbox client and Mailbox channels */
>  	struct mbox_client client;
>  	struct mbox_chan *mchan;
>  	struct device *mbox_dev;
> diff --git a/drivers/dma/bcm2835-dma.c b/drivers/dma/bcm2835-dma.c
> index 9d74fe97452e..e1b92b4d7b05 100644
> --- a/drivers/dma/bcm2835-dma.c
> +++ b/drivers/dma/bcm2835-dma.c
> @@ -369,7 +369,7 @@ static struct bcm2835_desc *bcm2835_dma_create_cb_chain(
>  	/* the last frame requires extra flags */
>  	d->cb_list[d->frames - 1].cb->info |= finalextrainfo;
>  
> -	/* detect a size missmatch */
> +	/* detect a size mismatch */
>  	if (buf_len && (d->size != buf_len))
>  		goto error_cb;
>  
> diff --git a/drivers/dma/ep93xx_dma.c b/drivers/dma/ep93xx_dma.c
> index d6c60635e90d..4ee337e78c23 100644
> --- a/drivers/dma/ep93xx_dma.c
> +++ b/drivers/dma/ep93xx_dma.c
> @@ -841,7 +841,7 @@ static dma_cookie_t ep93xx_dma_tx_submit(struct dma_async_tx_descriptor *tx)
>  	desc = container_of(tx, struct ep93xx_dma_desc, txd);
>  
>  	/*
> -	 * If nothing is currently prosessed, we push this descriptor
> +	 * If nothing is currently processed, we push this descriptor
>  	 * directly to the hardware. Otherwise we put the descriptor
>  	 * to the pending queue.
>  	 */
> @@ -1025,7 +1025,7 @@ ep93xx_dma_prep_dma_memcpy(struct dma_chan *chan, dma_addr_t dest,
>   * @chan: channel
>   * @sgl: list of buffers to transfer
>   * @sg_len: number of entries in @sgl
> - * @dir: direction of tha DMA transfer
> + * @dir: direction of the DMA transfer
>   * @flags: flags for the descriptor
>   * @context: operation context (ignored)
>   *
> diff --git a/drivers/dma/fsl-dpaa2-qdma/dpaa2-qdma.h b/drivers/dma/fsl-dpaa2-qdma/dpaa2-qdma.h
> index 2c80077cb7c0..36c284a3d184 100644
> --- a/drivers/dma/fsl-dpaa2-qdma/dpaa2-qdma.h
> +++ b/drivers/dma/fsl-dpaa2-qdma/dpaa2-qdma.h
> @@ -12,8 +12,8 @@ struct dpaa2_qdma_sd_d {
>  	u32 rsv:32;
>  	union {
>  		struct {
> -			u32 ssd:12; /* souce stride distance */
> -			u32 sss:12; /* souce stride size */
> +			u32 ssd:12; /* source stride distance */
> +			u32 sss:12; /* source stride size */
>  			u32 rsv1:8;
>  		} sdf;
>  		struct {
> @@ -48,7 +48,7 @@ struct dpaa2_qdma_sd_d {
>  #define QDMA_SER_DISABLE	(8) /* no notification */
>  #define QDMA_SER_CTX		BIT(8) /* notification by FQD_CTX[fqid] */
>  #define QDMA_SER_DEST		(2 << 8) /* notification by destination desc */
> -#define QDMA_SER_BOTH		(3 << 8) /* soruce and dest notification */
> +#define QDMA_SER_BOTH		(3 << 8) /* source and dest notification */
>  #define QDMA_FD_SPF_ENALBE	BIT(30) /* source prefetch enable */
>  
>  #define QMAN_FD_VA_ENABLE	BIT(14) /* Address used is virtual address */
> diff --git a/drivers/dma/hisi_dma.c b/drivers/dma/hisi_dma.c
> index 4c47bff81064..25a4134be36b 100644
> --- a/drivers/dma/hisi_dma.c
> +++ b/drivers/dma/hisi_dma.c
> @@ -677,7 +677,7 @@ static void hisi_dma_init_hw_qp(struct hisi_dma_dev *hdma_dev, u32 index)
>  		writel_relaxed(tmp, addr);
>  
>  		/*
> -		 * 0 - dma should process FLR whith CPU.
> +		 * 0 - dma should process FLR with CPU.
>  		 * 1 - dma not process FLR, only cpu process FLR.
>  		 */
>  		addr = q_base + HISI_DMA_HIP09_DMA_FLR_DISABLE +
> diff --git a/drivers/dma/idma64.c b/drivers/dma/idma64.c
> index e3505e56784b..2192b7136c2a 100644
> --- a/drivers/dma/idma64.c
> +++ b/drivers/dma/idma64.c
> @@ -290,7 +290,7 @@ static void idma64_desc_fill(struct idma64_chan *idma64c,
>  		desc->length += hw->len;
>  	} while (i);
>  
> -	/* Trigger an interrupt after the last block is transfered */
> +	/* Trigger an interrupt after the last block is transferred */
>  	lli->ctllo |= IDMA64C_CTLL_INT_EN;
>  
>  	/* Disable LLP transfer in the last block */
> @@ -364,7 +364,7 @@ static size_t idma64_active_desc_size(struct idma64_chan *idma64c)
>  	if (!i)
>  		return bytes;
>  
> -	/* The current chunk is not fully transfered yet */
> +	/* The current chunk is not fully transferred yet */
>  	bytes += desc->hw[--i].len;
>  
>  	return bytes - IDMA64C_CTLH_BLOCK_TS(ctlhi);
> diff --git a/drivers/dma/idxd/submit.c b/drivers/dma/idxd/submit.c
> index 817a564413b0..94eca25ae9b9 100644
> --- a/drivers/dma/idxd/submit.c
> +++ b/drivers/dma/idxd/submit.c
> @@ -134,7 +134,7 @@ static void llist_abort_desc(struct idxd_wq *wq, struct idxd_irq_entry *ie,
>  	 * completing the descriptor will return desc to allocator and
>  	 * the desc can be acquired by a different process and the
>  	 * desc->list can be modified.  Delete desc from list so the
> -	 * list trasversing does not get corrupted by the other process.
> +	 * list traversing does not get corrupted by the other process.
>  	 */
>  	list_for_each_entry_safe(d, t, &flist, list) {
>  		list_del_init(&d->list);
> diff --git a/drivers/dma/ioat/init.c b/drivers/dma/ioat/init.c
> index 7b502b60b38b..cc9ddd6c325b 100644
> --- a/drivers/dma/ioat/init.c
> +++ b/drivers/dma/ioat/init.c
> @@ -905,7 +905,7 @@ static int ioat_xor_val_self_test(struct ioatdma_device *ioat_dma)
>  
>  	op = IOAT_OP_XOR_VAL;
>  
> -	/* validate the sources with the destintation page */
> +	/* validate the sources with the destination page */
>  	for (i = 0; i < IOAT_NUM_SRC_TEST; i++)
>  		xor_val_srcs[i] = xor_srcs[i];
>  	xor_val_srcs[i] = dest;
> diff --git a/drivers/dma/lgm/lgm-dma.c b/drivers/dma/lgm/lgm-dma.c
> index 4117c7b67e9c..8173c3f1075a 100644
> --- a/drivers/dma/lgm/lgm-dma.c
> +++ b/drivers/dma/lgm/lgm-dma.c
> @@ -107,7 +107,7 @@
>   * If header mode is set in DMA descriptor,
>   *   If bit 30 is disabled, HDR_LEN must be configured according to channel
>   *     requirement.
> - *   If bit 30 is enabled(checksum with heade mode), HDR_LEN has no need to
> + *   If bit 30 is enabled(checksum with header mode), HDR_LEN has no need to
>   *     be configured. It will enable check sum for switch
>   * If header mode is not set in DMA descriptor,
>   *   This register setting doesn't matter
> diff --git a/drivers/dma/ls2x-apb-dma.c b/drivers/dma/ls2x-apb-dma.c
> index a49913f3ed3f..9652e8666722 100644
> --- a/drivers/dma/ls2x-apb-dma.c
> +++ b/drivers/dma/ls2x-apb-dma.c
> @@ -33,11 +33,11 @@
>  #define LDMA_STOP		BIT(4) /* DMA stop operation */
>  #define LDMA_CONFIG_MASK	GENMASK(4, 0) /* DMA controller config bits mask */
>  
> -/* Bitfields in ndesc_addr field of HW decriptor */
> +/* Bitfields in ndesc_addr field of HW descriptor */
>  #define LDMA_DESC_EN		BIT(0) /*1: The next descriptor is valid */
>  #define LDMA_DESC_ADDR_LOW	GENMASK(31, 1)
>  
> -/* Bitfields in cmd field of HW decriptor */
> +/* Bitfields in cmd field of HW descriptor */
>  #define LDMA_INT		BIT(1) /* Enable DMA interrupts */
>  #define LDMA_DATA_DIRECTION	BIT(12) /* 1: write to device, 0: read from device */
>  
> diff --git a/drivers/dma/mediatek/mtk-cqdma.c b/drivers/dma/mediatek/mtk-cqdma.c
> index 529100c5b9f5..b69eabf12a24 100644
> --- a/drivers/dma/mediatek/mtk-cqdma.c
> +++ b/drivers/dma/mediatek/mtk-cqdma.c
> @@ -518,7 +518,7 @@ mtk_cqdma_prep_dma_memcpy(struct dma_chan *c, dma_addr_t dest,
>  		/* setup dma channel */
>  		cvd[i]->ch = c;
>  
> -		/* setup sourece, destination, and length */
> +		/* setup source, destination, and length */
>  		tlen = (len > MTK_CQDMA_MAX_LEN) ? MTK_CQDMA_MAX_LEN : len;
>  		cvd[i]->len = tlen;
>  		cvd[i]->src = src;
> @@ -617,7 +617,7 @@ static int mtk_cqdma_alloc_chan_resources(struct dma_chan *c)
>  	u32 i, min_refcnt = U32_MAX, refcnt;
>  	unsigned long flags;
>  
> -	/* allocate PC with the minimun refcount */
> +	/* allocate PC with the minimum refcount */
>  	for (i = 0; i < cqdma->dma_channels; ++i) {
>  		refcnt = refcount_read(&cqdma->pc[i]->refcnt);
>  		if (refcnt < min_refcnt) {
> diff --git a/drivers/dma/mediatek/mtk-hsdma.c b/drivers/dma/mediatek/mtk-hsdma.c
> index 36ff11e909ea..58c7961ab9ad 100644
> --- a/drivers/dma/mediatek/mtk-hsdma.c
> +++ b/drivers/dma/mediatek/mtk-hsdma.c
> @@ -226,7 +226,7 @@ struct mtk_hsdma_soc {
>   * @pc_refcnt:		     Track how many VCs are using the PC
>   * @lock:		     Lock protect agaisting multiple VCs access PC
>   * @soc:		     The pointer to area holding differences among
> - *			     vaious platform
> + *			     various platform
>   */
>  struct mtk_hsdma_device {
>  	struct dma_device ddev;
> diff --git a/drivers/dma/mv_xor.c b/drivers/dma/mv_xor.c
> index bcd3b623ac6c..43efce77bb57 100644
> --- a/drivers/dma/mv_xor.c
> +++ b/drivers/dma/mv_xor.c
> @@ -414,7 +414,7 @@ mv_xor_tx_submit(struct dma_async_tx_descriptor *tx)
>  		if (!mv_chan_is_busy(mv_chan)) {
>  			u32 current_desc = mv_chan_get_current_desc(mv_chan);
>  			/*
> -			 * and the curren desc is the end of the chain before
> +			 * and the current desc is the end of the chain before
>  			 * the append, then we need to start the channel
>  			 */
>  			if (current_desc == old_chain_tail->async_tx.phys)
> @@ -1074,7 +1074,7 @@ mv_xor_channel_add(struct mv_xor_device *xordev,
>  	if (!mv_chan->dma_desc_pool_virt)
>  		return ERR_PTR(-ENOMEM);
>  
> -	/* discover transaction capabilites from the platform data */
> +	/* discover transaction capabilities from the platform data */
>  	dma_dev->cap_mask = cap_mask;
>  
>  	INIT_LIST_HEAD(&dma_dev->channels);
> diff --git a/drivers/dma/mv_xor.h b/drivers/dma/mv_xor.h
> index d86086b05b0e..c87cefd38a07 100644
> --- a/drivers/dma/mv_xor.h
> +++ b/drivers/dma/mv_xor.h
> @@ -99,7 +99,7 @@ struct mv_xor_device {
>   * @common: common dmaengine channel object members
>   * @slots_allocated: records the actual size of the descriptor slot pool
>   * @irq_tasklet: bottom half where mv_xor_slot_cleanup runs
> - * @op_in_desc: new mode of driver, each op is writen to descriptor.
> + * @op_in_desc: new mode of driver, each op is written to descriptor.
>   */
>  struct mv_xor_chan {
>  	int			pending;
> diff --git a/drivers/dma/mv_xor_v2.c b/drivers/dma/mv_xor_v2.c
> index 97ebc791a30b..c8c67f4d982c 100644
> --- a/drivers/dma/mv_xor_v2.c
> +++ b/drivers/dma/mv_xor_v2.c
> @@ -175,7 +175,7 @@ struct mv_xor_v2_device {
>   * struct mv_xor_v2_sw_desc - implements a xor SW descriptor
>   * @idx: descriptor index
>   * @async_tx: support for the async_tx api
> - * @hw_desc: assosiated HW descriptor
> + * @hw_desc: associated HW descriptor
>   * @free_list: node of the free SW descriprots list
>  */
>  struct mv_xor_v2_sw_desc {
> diff --git a/drivers/dma/nbpfaxi.c b/drivers/dma/nbpfaxi.c
> index c08916339aa7..3b011a91d48e 100644
> --- a/drivers/dma/nbpfaxi.c
> +++ b/drivers/dma/nbpfaxi.c
> @@ -897,7 +897,7 @@ static int nbpf_config(struct dma_chan *dchan,
>  	/*
>  	 * We could check config->slave_id to match chan->terminal here,
>  	 * but with DT they would be coming from the same source, so
> -	 * such a check would be superflous
> +	 * such a check would be superfluous
>  	 */
>  
>  	chan->slave_dst_addr = config->dst_addr;
> diff --git a/drivers/dma/of-dma.c b/drivers/dma/of-dma.c
> index e588fff9f21d..423442e55d36 100644
> --- a/drivers/dma/of-dma.c
> +++ b/drivers/dma/of-dma.c
> @@ -26,7 +26,7 @@ static DEFINE_MUTEX(of_dma_lock);
>   *
>   * Finds a DMA controller with matching device node and number for dma cells
>   * in a list of registered DMA controllers. If a match is found a valid pointer
> - * to the DMA data stored is retuned. A NULL pointer is returned if no match is
> + * to the DMA data stored is returned. A NULL pointer is returned if no match is
>   * found.
>   */
>  static struct of_dma *of_dma_find_controller(const struct of_phandle_args *dma_spec)
> @@ -342,7 +342,7 @@ EXPORT_SYMBOL_GPL(of_dma_simple_xlate);
>   *
>   * This function can be used as the of xlate callback for DMA driver which wants
>   * to match the channel based on the channel id. When using this xlate function
> - * the #dma-cells propety of the DMA controller dt node needs to be set to 1.
> + * the #dma-cells property of the DMA controller dt node needs to be set to 1.
>   * The data parameter of of_dma_controller_register must be a pointer to the
>   * dma_device struct the function should match upon.
>   *
> diff --git a/drivers/dma/owl-dma.c b/drivers/dma/owl-dma.c
> index e001f4f7aa64..aa436f9e3571 100644
> --- a/drivers/dma/owl-dma.c
> +++ b/drivers/dma/owl-dma.c
> @@ -1156,7 +1156,7 @@ static int owl_dma_probe(struct platform_device *pdev)
>  	}
>  
>  	/*
> -	 * Eventhough the DMA controller is capable of generating 4
> +	 * Even though the DMA controller is capable of generating 4
>  	 * IRQ's for DMA priority feature, we only use 1 IRQ for
>  	 * simplification.
>  	 */
> diff --git a/drivers/dma/ppc4xx/adma.c b/drivers/dma/ppc4xx/adma.c
> index bbb60a970dab..7b78759ac734 100644
> --- a/drivers/dma/ppc4xx/adma.c
> +++ b/drivers/dma/ppc4xx/adma.c
> @@ -9,7 +9,7 @@
>   */
>  
>  /*
> - * This driver supports the asynchrounous DMA copy and RAID engines available
> + * This driver supports the asynchronous DMA copy and RAID engines available
>   * on the AMCC PPC440SPe Processors.
>   * Based on the Intel Xscale(R) family of I/O Processors (IOP 32x, 33x, 134x)
>   * ADMA driver written by D.Williams.
> diff --git a/drivers/dma/ppc4xx/dma.h b/drivers/dma/ppc4xx/dma.h
> index 1ff4be23db0f..b5725481bfa6 100644
> --- a/drivers/dma/ppc4xx/dma.h
> +++ b/drivers/dma/ppc4xx/dma.h
> @@ -14,7 +14,7 @@
>  
>  /* Number of elements in the array with statical CDBs */
>  #define	MAX_STAT_DMA_CDBS	16
> -/* Number of DMA engines available on the contoller */
> +/* Number of DMA engines available on the controller */
>  #define DMA_ENGINES_NUM		2
>  
>  /* Maximum h/w supported number of destinations */
> diff --git a/drivers/dma/ptdma/ptdma.h b/drivers/dma/ptdma/ptdma.h
> index 21b4bf895200..39bc37268235 100644
> --- a/drivers/dma/ptdma/ptdma.h
> +++ b/drivers/dma/ptdma/ptdma.h
> @@ -192,7 +192,7 @@ struct pt_cmd_queue {
>  	/* Queue dma pool */
>  	struct dma_pool *dma_pool;
>  
> -	/* Queue base address (not neccessarily aligned)*/
> +	/* Queue base address (not necessarily aligned)*/
>  	struct ptdma_desc *qbase;
>  
>  	/* Aligned queue start address (per requirement) */
> diff --git a/drivers/dma/qcom/bam_dma.c b/drivers/dma/qcom/bam_dma.c
> index 5e7d332731e0..2d7550b8e03e 100644
> --- a/drivers/dma/qcom/bam_dma.c
> +++ b/drivers/dma/qcom/bam_dma.c
> @@ -440,7 +440,7 @@ static void bam_reset(struct bam_device *bdev)
>  	val |= BAM_EN;
>  	writel_relaxed(val, bam_addr(bdev, 0, BAM_CTRL));
>  
> -	/* set descriptor threshhold, start with 4 bytes */
> +	/* set descriptor threshold, start with 4 bytes */
>  	writel_relaxed(DEFAULT_CNT_THRSHLD,
>  			bam_addr(bdev, 0, BAM_DESC_CNT_TRSHLD));
>  
> @@ -667,7 +667,7 @@ static struct dma_async_tx_descriptor *bam_prep_slave_sg(struct dma_chan *chan,
>  	for_each_sg(sgl, sg, sg_len, i)
>  		num_alloc += DIV_ROUND_UP(sg_dma_len(sg), BAM_FIFO_SIZE);
>  
> -	/* allocate enough room to accomodate the number of entries */
> +	/* allocate enough room to accommodate the number of entries */
>  	async_desc = kzalloc(struct_size(async_desc, desc, num_alloc),
>  			     GFP_NOWAIT);
>  
> diff --git a/drivers/dma/qcom/gpi.c b/drivers/dma/qcom/gpi.c
> index e6ebd688d746..52a7c8f2498f 100644
> --- a/drivers/dma/qcom/gpi.c
> +++ b/drivers/dma/qcom/gpi.c
> @@ -1856,7 +1856,7 @@ static void gpi_issue_pending(struct dma_chan *chan)
>  
>  	read_lock_irqsave(&gpii->pm_lock, pm_lock_flags);
>  
> -	/* move all submitted discriptors to issued list */
> +	/* move all submitted descriptors to issued list */
>  	spin_lock_irqsave(&gchan->vc.lock, flags);
>  	if (vchan_issue_pending(&gchan->vc))
>  		vd = list_last_entry(&gchan->vc.desc_issued,
> diff --git a/drivers/dma/qcom/qcom_adm.c b/drivers/dma/qcom/qcom_adm.c
> index 53f4273b657c..c1db398adc84 100644
> --- a/drivers/dma/qcom/qcom_adm.c
> +++ b/drivers/dma/qcom/qcom_adm.c
> @@ -650,7 +650,7 @@ static enum dma_status adm_tx_status(struct dma_chan *chan, dma_cookie_t cookie,
>  	/*
>  	 * residue is either the full length if it is in the issued list, or 0
>  	 * if it is in progress.  We have no reliable way of determining
> -	 * anything inbetween
> +	 * anything in between
>  	 */
>  	dma_set_residue(txstate, residue);
>  
> diff --git a/drivers/dma/sh/shdmac.c b/drivers/dma/sh/shdmac.c
> index 7cc9eb2217e8..8ead0a1fd237 100644
> --- a/drivers/dma/sh/shdmac.c
> +++ b/drivers/dma/sh/shdmac.c
> @@ -318,7 +318,7 @@ static void sh_dmae_setup_xfer(struct shdma_chan *schan,
>  }
>  
>  /*
> - * Find a slave channel configuration from the contoller list by either a slave
> + * Find a slave channel configuration from the controller list by either a slave
>   * ID in the non-DT case, or by a MID/RID value in the DT case
>   */
>  static const struct sh_dmae_slave_config *dmae_find_slave(
> diff --git a/drivers/dma/ste_dma40.h b/drivers/dma/ste_dma40.h
> index c697bfe16a01..a90c786acc1f 100644
> --- a/drivers/dma/ste_dma40.h
> +++ b/drivers/dma/ste_dma40.h
> @@ -4,7 +4,7 @@
>  #define STE_DMA40_H
>  
>  /*
> - * Maxium size for a single dma descriptor
> + * Maximum size for a single dma descriptor
>   * Size is limited to 16 bits.
>   * Size is in the units of addr-widths (1,2,4,8 bytes)
>   * Larger transfers will be split up to multiple linked desc
> diff --git a/drivers/dma/ste_dma40_ll.h b/drivers/dma/ste_dma40_ll.h
> index c504e855eb02..2e30e9a94a1e 100644
> --- a/drivers/dma/ste_dma40_ll.h
> +++ b/drivers/dma/ste_dma40_ll.h
> @@ -369,7 +369,7 @@ struct d40_phy_lli_bidir {
>   * @lcsp02: Either maps to register lcsp0 if src or lcsp2 if dst.
>   * @lcsp13: Either maps to register lcsp1 if src or lcsp3 if dst.
>   *
> - * This struct must be 8 bytes aligned since it will be accessed directy by
> + * This struct must be 8 bytes aligned since it will be accessed directly by
>   * the DMA. Never add any none hw mapped registers to this struct.
>   */
>  
> diff --git a/drivers/dma/tegra20-apb-dma.c b/drivers/dma/tegra20-apb-dma.c
> index ac69778827f2..7d1acda2d72b 100644
> --- a/drivers/dma/tegra20-apb-dma.c
> +++ b/drivers/dma/tegra20-apb-dma.c
> @@ -463,7 +463,7 @@ static void tegra_dma_configure_for_next(struct tegra_dma_channel *tdc,
>  
>  	/*
>  	 * If interrupt is pending then do nothing as the ISR will handle
> -	 * the programing for new request.
> +	 * the programming for new request.
>  	 */
>  	if (status & TEGRA_APBDMA_STATUS_ISE_EOC) {
>  		dev_err(tdc2dev(tdc),
> diff --git a/drivers/dma/xgene-dma.c b/drivers/dma/xgene-dma.c
> index fd4397adeb79..275848a9c450 100644
> --- a/drivers/dma/xgene-dma.c
> +++ b/drivers/dma/xgene-dma.c
> @@ -1742,7 +1742,7 @@ static int xgene_dma_probe(struct platform_device *pdev)
>  	/* Initialize DMA channels software state */
>  	xgene_dma_init_channels(pdma);
>  
> -	/* Configue DMA rings */
> +	/* Configure DMA rings */
>  	ret = xgene_dma_init_rings(pdma);
>  	if (ret)
>  		goto err_clk_enable;
> diff --git a/drivers/dma/xilinx/xilinx_dpdma.c b/drivers/dma/xilinx/xilinx_dpdma.c
> index 36bd4825d389..c26ebced866c 100644
> --- a/drivers/dma/xilinx/xilinx_dpdma.c
> +++ b/drivers/dma/xilinx/xilinx_dpdma.c
> @@ -149,7 +149,7 @@ struct xilinx_dpdma_chan;
>   * @addr_ext: upper 16 bit of 48 bit address (next_desc and src_addr)
>   * @next_desc: next descriptor 32 bit address
>   * @src_addr: payload source address (1st page, 32 LSB)
> - * @addr_ext_23: payload source address (3nd and 3rd pages, 16 LSBs)
> + * @addr_ext_23: payload source address (2nd and 3rd pages, 16 LSBs)
>   * @addr_ext_45: payload source address (4th and 5th pages, 16 LSBs)
>   * @src_addr2: payload source address (2nd page, 32 LSB)
>   * @src_addr3: payload source address (3rd page, 32 LSB)
> @@ -210,7 +210,7 @@ struct xilinx_dpdma_tx_desc {
>   * @vchan: virtual DMA channel
>   * @reg: register base address
>   * @id: channel ID
> - * @wait_to_stop: queue to wait for outstanding transacitons before stopping
> + * @wait_to_stop: queue to wait for outstanding transactions before stopping
>   * @running: true if the channel is running
>   * @first_frame: flag for the first frame of stream
>   * @video_group: flag if multi-channel operation is needed for video channels




[Index of Archives]     [Linux Kernel]     [Linux ARM (vger)]     [Linux ARM MSM]     [Linux Omap]     [Linux Arm]     [Linux Tegra]     [Fedora ARM]     [Linux for Samsung SOC]     [eCos]     [Linux PCI]     [Linux Fastboot]     [Gcc Help]     [Git]     [DCCP]     [IETF Announce]     [Security]     [Linux MIPS]     [Yosemite Campsites]

  Powered by Linux