Re: [PATCH v2 04/16] crypto: qce - Add support for crypto address read

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 15/08/2024 10:57, Md Sadre Alam wrote:
> Get crypto base address from DT. This will use for
> command descriptor support for crypto register r/w
> via BAM/DMA

All your commit messages are oddly wrapped. This does not make reading
it easy...

> 
> Signed-off-by: Md Sadre Alam <quic_mdalam@xxxxxxxxxxx>
> ---
> Change in [v2]
> 
> * Addressed all comments from v1
> 
> Change in [v1]
> 
> * Added support to read crypto base address from dt
> 
>  drivers/crypto/qce/core.c | 13 ++++++++++++-
>  drivers/crypto/qce/core.h |  1 +
>  2 files changed, 13 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/crypto/qce/core.c b/drivers/crypto/qce/core.c
> index 28b5fd823827..9b23a948078a 100644
> --- a/drivers/crypto/qce/core.c
> +++ b/drivers/crypto/qce/core.c
> @@ -192,6 +192,7 @@ static int qce_crypto_probe(struct platform_device *pdev)
>  {
>  	struct device *dev = &pdev->dev;
>  	struct qce_device *qce;
> +	struct resource *res;
>  	int ret;
>  
>  	qce = devm_kzalloc(dev, sizeof(*qce), GFP_KERNEL);
> @@ -201,10 +202,16 @@ static int qce_crypto_probe(struct platform_device *pdev)
>  	qce->dev = dev;
>  	platform_set_drvdata(pdev, qce);
>  
> -	qce->base = devm_platform_ioremap_resource(pdev, 0);
> +	qce->base = devm_platform_get_and_ioremap_resource(pdev, 0, &res);
>  	if (IS_ERR(qce->base))
>  		return PTR_ERR(qce->base);
>  
> +	qce->base_dma = dma_map_resource(dev, res->start,
> +					 resource_size(res),
> +					 DMA_BIDIRECTIONAL, 0);
> +	if (dma_mapping_error(dev, qce->base_dma))
> +		return -ENXIO;
> +
>  	ret = dma_set_mask_and_coherent(dev, DMA_BIT_MASK(32));
>  	if (ret < 0)
>  		return ret;

And how do you handle error paths?


> @@ -280,6 +287,7 @@ static int qce_crypto_probe(struct platform_device *pdev)
>  static void qce_crypto_remove(struct platform_device *pdev)
>  {
>  	struct qce_device *qce = platform_get_drvdata(pdev);
> +	struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
>  
>  	tasklet_kill(&qce->done_tasklet);
>  	qce_unregister_algs(qce);
> @@ -287,6 +295,9 @@ static void qce_crypto_remove(struct platform_device *pdev)
>  	clk_disable_unprepare(qce->bus);
>  	clk_disable_unprepare(qce->iface);
>  	clk_disable_unprepare(qce->core);
> +
> +	dma_unmap_resource(&pdev->dev, qce->base_dma, resource_size(res),
> +			   DMA_BIDIRECTIONAL, 0);

If you add code to the remove callback, not adding it to error paths is
suspicious by itself...

Best regards,
Krzysztof





[Index of Archives]     [Linux Kernel]     [Linux ARM (vger)]     [Linux ARM MSM]     [Linux Omap]     [Linux Arm]     [Linux Tegra]     [Fedora ARM]     [Linux for Samsung SOC]     [eCos]     [Linux PCI]     [Linux Fastboot]     [Gcc Help]     [Git]     [DCCP]     [IETF Announce]     [Security]     [Linux MIPS]     [Yosemite Campsites]

  Powered by Linux