Re: [PATCH v2 01/16] dt-bindings: dma: qcom,bam: Add bam pipe lock

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 15/08/2024 10:57, Md Sadre Alam wrote:
> BAM having pipe locking mechanism. The Lock and Un-Lock bit
> should be set on CMD descriptor only. Upon encountering a
> descriptor with Lock bit set, the BAM will lock all other
> pipes not related to the current pipe group, and keep
> handling the current pipe only until it sees the Un-Lock
> set.

Please wrap commit message according to Linux coding style / submission
process (neither too early nor over the limit):
https://elixir.bootlin.com/linux/v6.4-rc1/source/Documentation/process/submitting-patches.rst#L597

> 
> Signed-off-by: Md Sadre Alam <quic_mdalam@xxxxxxxxxxx>
> ---
> 
> Change in [v2]
> 
> * Added initial support for dt-binding
> 
> Change in [v1]
> 
> * This patch was not included in [v1]
> 
>  Documentation/devicetree/bindings/dma/qcom,bam-dma.yaml | 8 ++++++++
>  1 file changed, 8 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/dma/qcom,bam-dma.yaml b/Documentation/devicetree/bindings/dma/qcom,bam-dma.yaml
> index 3ad0d9b1fbc5..91cc2942aa62 100644
> --- a/Documentation/devicetree/bindings/dma/qcom,bam-dma.yaml
> +++ b/Documentation/devicetree/bindings/dma/qcom,bam-dma.yaml
> @@ -77,6 +77,12 @@ properties:
>        Indicates that the bam is powered up by a remote processor but must be
>        initialized by the local processor.
>  
> +  qcom,bam_pipe_lock:

Please follow DTS coding style.

> +    type: boolean
> +    description:
> +      Indicates that the bam pipe needs locking or not based on client driver
> +      sending the LOCK or UNLOK bit set on command descriptor.

You described the desired Linux feature or behavior, not the actual
hardware. The bindings are about the latter, so instead you need to
rephrase the property and its description to match actual hardware
capabilities/features/configuration etc.

> +
>    reg:
>      maxItems: 1
>  
> @@ -92,6 +98,8 @@ anyOf:
>        - qcom,powered-remotely
>    - required:
>        - qcom,controlled-remotely
> +  - required:
> +      - qcom,bam_pipe_lock

Why is it here? What do you want to achieve?

>    - required:
>        - clocks
>        - clock-names

Best regards,
Krzysztof





[Index of Archives]     [Linux Kernel]     [Linux ARM (vger)]     [Linux ARM MSM]     [Linux Omap]     [Linux Arm]     [Linux Tegra]     [Fedora ARM]     [Linux for Samsung SOC]     [eCos]     [Linux PCI]     [Linux Fastboot]     [Gcc Help]     [Git]     [DCCP]     [IETF Announce]     [Security]     [Linux MIPS]     [Yosemite Campsites]

  Powered by Linux