[PATCH RESEND 2/2] damengine: dw-edma: Add msi wartermark configuration

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



HDMA trigger wartermark interrupt, When use the RIE flag.
PCIe RC will trigger AER, If msi wartermark addr is not configuration.
This patch fix it by add msi wartermark configuration

Signed-off-by: zheng.dongxiong <zheng.dongxiong@xxxxxxxxxxx>
---
 drivers/dma/dw-edma/dw-hdma-v0-core.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/dma/dw-edma/dw-hdma-v0-core.c b/drivers/dma/dw-edma/dw-hdma-v0-core.c
index d77051d1e..c4d15a7a7 100644
--- a/drivers/dma/dw-edma/dw-hdma-v0-core.c
+++ b/drivers/dma/dw-edma/dw-hdma-v0-core.c
@@ -280,6 +280,9 @@ static void dw_hdma_v0_core_ch_config(struct dw_edma_chan *chan)
 	/* MSI done addr - low, high */
 	SET_CH_32(dw, chan->dir, chan->id, msi_stop.lsb, chan->msi.address_lo);
 	SET_CH_32(dw, chan->dir, chan->id, msi_stop.msb, chan->msi.address_hi);
+	/* MSI watermark addr - low, high */
+	SET_CH_32(dw, chan->dir, chan->id, msi_watermark.lsb, chan->msi.address_lo);
+	SET_CH_32(dw, chan->dir, chan->id, msi_watermark.msb, chan->msi.address_hi);
 	/* MSI abort addr - low, high */
 	SET_CH_32(dw, chan->dir, chan->id, msi_abort.lsb, chan->msi.address_lo);
 	SET_CH_32(dw, chan->dir, chan->id, msi_abort.msb, chan->msi.address_hi);
-- 
2.34.1





[Index of Archives]     [Linux Kernel]     [Linux ARM (vger)]     [Linux ARM MSM]     [Linux Omap]     [Linux Arm]     [Linux Tegra]     [Fedora ARM]     [Linux for Samsung SOC]     [eCos]     [Linux PCI]     [Linux Fastboot]     [Gcc Help]     [Git]     [DCCP]     [IETF Announce]     [Security]     [Linux MIPS]     [Yosemite Campsites]

  Powered by Linux