[PATCH 1/1] dt-bindings: fsl-qdma: Convert to yaml format

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Convert binding doc from txt to yaml.

Re-order interrupt-names to align example.
Add #dma-cell in example.
Change 'reg' in example to 32bit address.

Signed-off-by: Frank Li <Frank.Li@xxxxxxx>
---

Notes:
    Pass dt_binding_check:
    
    make dt_binding_check DT_SCHEMA_FILES=fsl-qdma.yaml
      SCHEMA  Documentation/devicetree/bindings/processed-schema.json
      CHKDT   Documentation/devicetree/bindings
      LINT    Documentation/devicetree/bindings
      DTEX    Documentation/devicetree/bindings/dma/fsl-qdma.example.dts
      DTC_CHK Documentation/devicetree/bindings/dma/fsl-qdma.example.dtb

 .../devicetree/bindings/dma/fsl-qdma.txt      |  58 ---------
 .../devicetree/bindings/dma/fsl-qdma.yaml     | 110 ++++++++++++++++++
 2 files changed, 110 insertions(+), 58 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/dma/fsl-qdma.txt
 create mode 100644 Documentation/devicetree/bindings/dma/fsl-qdma.yaml

diff --git a/Documentation/devicetree/bindings/dma/fsl-qdma.txt b/Documentation/devicetree/bindings/dma/fsl-qdma.txt
deleted file mode 100644
index da371c4d406ce..0000000000000
--- a/Documentation/devicetree/bindings/dma/fsl-qdma.txt
+++ /dev/null
@@ -1,58 +0,0 @@
-NXP Layerscape SoC qDMA Controller
-==================================
-
-This device follows the generic DMA bindings defined in dma/dma.txt.
-
-Required properties:
-
-- compatible:		Must be one of
-			 "fsl,ls1021a-qdma": for LS1021A Board
-			 "fsl,ls1028a-qdma": for LS1028A Board
-			 "fsl,ls1043a-qdma": for ls1043A Board
-			 "fsl,ls1046a-qdma": for ls1046A Board
-- reg:			Should contain the register's base address and length.
-- interrupts:		Should contain a reference to the interrupt used by this
-			device.
-- interrupt-names:	Should contain interrupt names:
-			 "qdma-queue0": the block0 interrupt
-			 "qdma-queue1": the block1 interrupt
-			 "qdma-queue2": the block2 interrupt
-			 "qdma-queue3": the block3 interrupt
-			 "qdma-error":  the error interrupt
-- fsl,dma-queues:	Should contain number of queues supported.
-- dma-channels:	Number of DMA channels supported
-- block-number:	the virtual block number
-- block-offset:	the offset of different virtual block
-- status-sizes:	status queue size of per virtual block
-- queue-sizes:		command queue size of per virtual block, the size number
-			based on queues
-
-Optional properties:
-
-- dma-channels:		Number of DMA channels supported by the controller.
-- big-endian:		If present registers and hardware scatter/gather descriptors
-			of the qDMA are implemented in big endian mode, otherwise in little
-			mode.
-
-Examples:
-
-	qdma: dma-controller@8390000 {
-			compatible = "fsl,ls1021a-qdma";
-			reg = <0x0 0x8388000 0x0 0x1000>, /* Controller regs */
-			      <0x0 0x8389000 0x0 0x1000>, /* Status regs */
-			      <0x0 0x838a000 0x0 0x2000>; /* Block regs */
-			interrupts = <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "qdma-error",
-				"qdma-queue0", "qdma-queue1";
-			dma-channels = <8>;
-			block-number = <2>;
-			block-offset = <0x1000>;
-			fsl,dma-queues = <2>;
-			status-sizes = <64>;
-			queue-sizes = <64 64>;
-			big-endian;
-		};
-
-DMA clients must use the format described in dma/dma.txt file.
diff --git a/Documentation/devicetree/bindings/dma/fsl-qdma.yaml b/Documentation/devicetree/bindings/dma/fsl-qdma.yaml
new file mode 100644
index 0000000000000..e6d24670ff893
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/fsl-qdma.yaml
@@ -0,0 +1,110 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/dma/fsl-qdma.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP Layerscape SoC qDMA Controller
+
+maintainers:
+  - Frank Li <Frank.Li@xxxxxxx>
+
+properties:
+  compatible:
+    enum:
+      - fsl,ls1021a-qdma
+      - fsl,ls1028a-qdma
+      - fsl,ls1043a-qdma
+      - fsl,ls1046a-qdma
+
+  reg:
+    items:
+      - description: Controller regs
+      - description: Status regs
+      - description: Block regs
+
+  interrupts:
+    minItems: 2
+    maxItems: 5
+
+  interrupt-names:
+    minItems: 2
+    items:
+      - const: qdma-error
+      - const: qdma-queue0
+      - const: qdma-queue1
+      - const: qdma-queue2
+      - const: qdma-queue3
+
+  dma-channels:
+    minItems: 1
+    maxItems: 64
+
+  fsl,dma-queues:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: Should contain number of queues supported.
+
+  block-number:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: the virtual block number
+
+  block-offset:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: the offset of different virtual block
+
+  status-sizes:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: status queue size of per virtual block
+
+  queue-sizes:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    description:
+      command queue size of per virtual block, the size number
+      based on queues
+
+  big-endian:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      If present registers and hardware scatter/gather descriptors
+      of the qDMA are implemented in big endian mode, otherwise in little
+      mode.
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - interrupt-names
+  - fsl,dma-queues
+  - block-number
+  - block-offset
+  - status-sizes
+  - queue-sizes
+
+unevaluatedProperties: false
+
+allOf:
+  - $ref: dma-controller.yaml#
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    dma-controller@8390000 {
+        compatible = "fsl,ls1021a-qdma";
+        reg = <0x8388000 0x1000>, /* Controller regs */
+              <0x8389000 0x1000>, /* Status regs */
+              <0x838a000 0x2000>; /* Block regs */
+        interrupts = <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
+        interrupt-names = "qdma-error", "qdma-queue0", "qdma-queue1";
+        #dma-cells = <1>;
+        dma-channels = <8>;
+        block-number = <2>;
+        block-offset = <0x1000>;
+        status-sizes = <64>;
+        queue-sizes = <64 64>;
+        big-endian;
+        fsl,dma-queues = <2>;
+    };
+
-- 
2.34.1





[Index of Archives]     [Linux Kernel]     [Linux ARM (vger)]     [Linux ARM MSM]     [Linux Omap]     [Linux Arm]     [Linux Tegra]     [Fedora ARM]     [Linux for Samsung SOC]     [eCos]     [Linux PCI]     [Linux Fastboot]     [Gcc Help]     [Git]     [DCCP]     [IETF Announce]     [Security]     [Linux MIPS]     [Yosemite Campsites]

  Powered by Linux