On 3/3/2024 7:42 PM, Vinod Koul wrote:
On 01-03-24, 10:37, Bjorn Andersson wrote:
On Fri, Mar 01, 2024 at 04:56:38PM +0530, Mukesh Kumar Savaliya wrote:
we are seeing protocol errors like NACK as transfer failure but
ideally it should report exact error like NACK, BUS_PROTO or ARB_LOST.
Hence we are adding such error support in GSI mode and reporting it
accordingly by adding respective error logs.
geni_i2c_gpi_xfer() needed to allocate heap based memory instead of
stack memory to handle and store the geni_i2c_dev handle.
Copy event status from GSI driver to the i2c device status and parse
error when callback comes from gsi driver to the i2c driver. In the
gpi.c, we need to store callback param into i2c config data structure
so that inside the i2c driver, we can check what exactly the error is
and parse it accordingly.
Fixes: d8703554f4de ("i2c: qcom-geni: Add support for GPI DMA")
Co-developed-by: Viken Dadhaniya <quic_vdadhani@xxxxxxxxxxx>
Signed-off-by: Viken Dadhaniya <quic_vdadhani@xxxxxxxxxxx>
Signed-off-by: Mukesh Kumar Savaliya <quic_msavaliy@xxxxxxxxxxx>
---
drivers/dma/qcom/gpi.c | 12 +++++++-
drivers/i2c/busses/i2c-qcom-geni.c | 46 +++++++++++++++++++-----------
include/linux/dma/qcom-gpi-dma.h | 4 +++
3 files changed, 44 insertions(+), 18 deletions(-)
diff --git a/drivers/dma/qcom/gpi.c b/drivers/dma/qcom/gpi.c
index 1c93864e0e4d..6d718916fba4 100644
--- a/drivers/dma/qcom/gpi.c
+++ b/drivers/dma/qcom/gpi.c
@@ -1076,7 +1076,17 @@ static void gpi_process_xfer_compl_event(struct gchan *gchan,
dev_dbg(gpii->gpi_dev->dev, "Residue %d\n", result.residue);
dma_cookie_complete(&vd->tx);
- dmaengine_desc_get_callback_invoke(&vd->tx, &result);
+ if (gchan->protocol == QCOM_GPI_I2C) {
+ struct dmaengine_desc_callback cb;
+ struct gpi_i2c_config *i2c;
+
+ dmaengine_desc_get_callback(&vd->tx, &cb);
+ i2c = cb.callback_param;
+ i2c->status = compl_event->status;
What would the DMA maintainer say about extending struct
dmaengine_tx_result with some protocol-specific status field?
That would be sane thing to do if we can get protocol status. Most of
the times DMA txn would tell you success or fail, here we have firmware
which tells us this and I see no reason why this can't be propagated.
Thanks Vinod for reviewing the change. I have uploaded latest patch
considering other review comments.
