Re: [PATCH] dmaengine: tegra186: Fix residual calculation

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On 29/02/2024 06:52, Akhil R wrote:
The exisiting residual calculation returns an incorrect value when

s/exisiting/existing/

bytes_xfer == bytes_req. This scenario occurs particularly with
drivers like UART where DMA is scheduled for maximum number of bytes and
is terminated when the bytes inflow stops. At higher baud rates, it
could request the tx_status while there is no bytes left to transfer.
This will lead to incorrect residual being set. Hence return residual as
'0' when bytes transferred equals to the bytes requested.

Fixes: ee17028009d4 ("dmaengine: tegra: Add tegra gpcdma driver")
Signed-off-by: Akhil R <akhilrajeev@xxxxxxxxxx>
---
  drivers/dma/tegra186-gpc-dma.c | 3 +++
  1 file changed, 3 insertions(+)

diff --git a/drivers/dma/tegra186-gpc-dma.c b/drivers/dma/tegra186-gpc-dma.c
index 88547a23825b..3642508e88bb 100644
--- a/drivers/dma/tegra186-gpc-dma.c
+++ b/drivers/dma/tegra186-gpc-dma.c
@@ -746,6 +746,9 @@ static int tegra_dma_get_residual(struct tegra_dma_channel *tdc)
  	bytes_xfer = dma_desc->bytes_xfer +
  		     sg_req[dma_desc->sg_idx].len - (wcount * 4);
+ if (dma_desc->bytes_req == bytes_xfer)
+		return 0;
+
  	residual = dma_desc->bytes_req - (bytes_xfer % dma_desc->bytes_req);
return residual;


Thanks! Apart from the typo, looks good to me ...

Reviewed-by: Jon Hunter <jonathanh@xxxxxxxxxx>

Jon

--
nvpublic




[Index of Archives]     [Linux Kernel]     [Linux ARM (vger)]     [Linux ARM MSM]     [Linux Omap]     [Linux Arm]     [Linux Tegra]     [Fedora ARM]     [Linux for Samsung SOC]     [eCos]     [Linux PCI]     [Linux Fastboot]     [Gcc Help]     [Git]     [DCCP]     [IETF Announce]     [Security]     [Linux MIPS]     [Yosemite Campsites]

  Powered by Linux