Re: [PATCH 1/1] dmaengine: fsl-qdma: init irq after reg initialization

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, 01 Feb 2024 17:04:06 -0500, Frank Li wrote:
> Initialize the qDMA irqs after the registers are configured so that
> interrupts that may have been pending from a primary kernel don't get
> processed by the irq handler before it is ready to and cause panic with
> the following trace:
> 
>   Call trace:
>    fsl_qdma_queue_handler+0xf8/0x3e8
>    __handle_irq_event_percpu+0x78/0x2b0
>    handle_irq_event_percpu+0x1c/0x68
>    handle_irq_event+0x44/0x78
>    handle_fasteoi_irq+0xc8/0x178
>    generic_handle_irq+0x24/0x38
>    __handle_domain_irq+0x90/0x100
>    gic_handle_irq+0x5c/0xb8
>    el1_irq+0xb8/0x180
>    _raw_spin_unlock_irqrestore+0x14/0x40
>    __setup_irq+0x4bc/0x798
>    request_threaded_irq+0xd8/0x190
>    devm_request_threaded_irq+0x74/0xe8
>    fsl_qdma_probe+0x4d4/0xca8
>    platform_drv_probe+0x50/0xa0
>    really_probe+0xe0/0x3f8
>    driver_probe_device+0x64/0x130
>    device_driver_attach+0x6c/0x78
>    __driver_attach+0xbc/0x158
>    bus_for_each_dev+0x5c/0x98
>    driver_attach+0x20/0x28
>    bus_add_driver+0x158/0x220
>    driver_register+0x60/0x110
>    __platform_driver_register+0x44/0x50
>    fsl_qdma_driver_init+0x18/0x20
>    do_one_initcall+0x48/0x258
>    kernel_init_freeable+0x1a4/0x23c
>    kernel_init+0x10/0xf8
>    ret_from_fork+0x10/0x18
> 
> [...]

Applied, thanks!

[1/1] dmaengine: fsl-qdma: init irq after reg initialization
      commit: 87a39071e0b639f45e05d296cc0538eef44ec0bd

Best regards,
-- 
~Vinod






[Index of Archives]     [Linux Kernel]     [Linux ARM (vger)]     [Linux ARM MSM]     [Linux Omap]     [Linux Arm]     [Linux Tegra]     [Fedora ARM]     [Linux for Samsung SOC]     [eCos]     [Linux PCI]     [Linux Fastboot]     [Gcc Help]     [Git]     [DCCP]     [IETF Announce]     [Security]     [Linux MIPS]     [Yosemite Campsites]

  Powered by Linux