Convert the Marvell MMP DMA binding to YAML. The TXT binding mentions that the controller may have one IRQ per DMA channel. Examples of this were dropped in the YAML binding because of dt_binding_check complaints (either too many interrupt cells or interrupts) and the fact that this is not used in any of the in-tree device trees. Signed-off-by: Duje Mihanović <duje.mihanovic@xxxxxxxx> --- .../devicetree/bindings/dma/marvell,mmp-dma.yaml | 82 ++++++++++++++++++++++ Documentation/devicetree/bindings/dma/mmp-dma.txt | 81 --------------------- 2 files changed, 82 insertions(+), 81 deletions(-) diff --git a/Documentation/devicetree/bindings/dma/marvell,mmp-dma.yaml b/Documentation/devicetree/bindings/dma/marvell,mmp-dma.yaml new file mode 100644 index 000000000000..fe94ba9143e0 --- /dev/null +++ b/Documentation/devicetree/bindings/dma/marvell,mmp-dma.yaml @@ -0,0 +1,82 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/dma/marvell,mmp-dma.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Marvell MMP DMA controller + +maintainers: + - Duje Mihanović <duje.mihanovic@xxxxxxxx> + +description: + Marvell MMP SoCs may have two types of DMA controllers, peripheral and audio. + +properties: + compatible: + enum: + - marvell,pdma-1.0 + - marvell,adma-1.0 + - marvell,pxa910-squ + + reg: + maxItems: 1 + + interrupts: + description: + Interrupt lines for the controller, may be shared or one per DMA channel + minItems: 1 + + '#dma-channels': + deprecated: true + + '#dma-requests': + deprecated: true + +required: + - compatible + - reg + - interrupts + - '#dma-cells' + +allOf: + - $ref: dma-controller.yaml# + - if: + properties: + compatible: + contains: + enum: + - marvell,adma-1.0 + - marvell,pxa910-squ + then: + properties: + asram: + description: + phandle to the SRAM pool + minItems: 1 + maxItems: 1 + iram: + maxItems: 1 + +unevaluatedProperties: false + +examples: + # Peripheral controller + - | + pdma0: dma-controller@d4000000 { + compatible = "marvell,pdma-1.0"; + reg = <0xd4000000 0x10000>; + interrupts = <47>; + #dma-cells = <2>; + dma-channels = <16>; + }; + + # Audio controller + - | + squ: dma-controller@d42a0800 { + compatible = "marvell,pxa910-squ"; + reg = <0xd42a0800 0x100>; + interrupts = <46>; + #dma-cells = <2>; + dma-channels = <2>; + }; diff --git a/Documentation/devicetree/bindings/dma/mmp-dma.txt b/Documentation/devicetree/bindings/dma/mmp-dma.txt deleted file mode 100644 index ec18bf0a802a..000000000000 --- a/Documentation/devicetree/bindings/dma/mmp-dma.txt +++ /dev/null @@ -1,81 +0,0 @@ -* MARVELL MMP DMA controller - -Marvell Peripheral DMA Controller -Used platforms: pxa688, pxa910, pxa3xx, etc - -Required properties: -- compatible: Should be "marvell,pdma-1.0" -- reg: Should contain DMA registers location and length. -- interrupts: Either contain all of the per-channel DMA interrupts - or one irq for pdma device - -Optional properties: -- dma-channels: Number of DMA channels supported by the controller (defaults - to 32 when not specified) -- #dma-channels: deprecated -- dma-requests: Number of DMA requestor lines supported by the controller - (defaults to 32 when not specified) -- #dma-requests: deprecated - -"marvell,pdma-1.0" -Used platforms: pxa25x, pxa27x, pxa3xx, pxa93x, pxa168, pxa910, pxa688. - -Examples: - -/* - * Each channel has specific irq - * ICU parse out irq channel from ICU register, - * while DMA controller may not able to distinguish the irq channel - * Using this method, interrupt-parent is required as demuxer - * For example, pxa688 icu register 0x128, bit 0~15 is PDMA channel irq, - * 18~21 is ADMA irq - */ -pdma: dma-controller@d4000000 { - compatible = "marvell,pdma-1.0"; - reg = <0xd4000000 0x10000>; - interrupts = <0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15>; - interrupt-parent = <&intcmux32>; - dma-channels = <16>; - }; - -/* - * One irq for all channels - * Dmaengine driver (DMA controller) distinguish irq channel via - * parsing internal register - */ -pdma: dma-controller@d4000000 { - compatible = "marvell,pdma-1.0"; - reg = <0xd4000000 0x10000>; - interrupts = <47>; - dma-channels = <16>; - }; - - -Marvell Two Channel DMA Controller used specifically for audio -Used platforms: pxa688, pxa910 - -Required properties: -- compatible: Should be "marvell,adma-1.0" or "marvell,pxa910-squ" -- reg: Should contain DMA registers location and length. -- interrupts: Either contain all of the per-channel DMA interrupts - or one irq for dma device - -"marvell,adma-1.0" used on pxa688 -"marvell,pxa910-squ" used on pxa910 - -Examples: - -/* each channel has specific irq */ -adma0: dma-controller@d42a0800 { - compatible = "marvell,adma-1.0"; - reg = <0xd42a0800 0x100>; - interrupts = <18 19>; - interrupt-parent = <&intcmux32>; - }; - -/* One irq for all channels */ -squ: dma-controller@d42a0800 { - compatible = "marvell,pxa910-squ"; - reg = <0xd42a0800 0x100>; - interrupts = <46>; - }; --- base-commit: 6613476e225e090cc9aad49be7fa504e290dd33d change-id: 20240125-pxa-dma-yaml-0b62e10824f4 Best regards, -- Duje Mihanović <duje.mihanovic@xxxxxxxx>
