According to the XDMA datasheet (PG195), the address of any descriptor
must be 32 byte aligned. The datasheet also states that a contiguous
block of descriptors must not cross a 4k address boundary. Therefore,
it is possible to ease the pressure put on the dma_pool allocator
just by requiring sufficient alignment and boundary values. Add proper
macro definition and change the values passed into the
dma_pool_create().
Signed-off-by: Jan Kuliga <jankul@xxxxxxxxxxxxxxxx>
---
drivers/dma/xilinx/xdma-regs.h | 7 ++++---
drivers/dma/xilinx/xdma.c | 5 ++---
2 files changed, 6 insertions(+), 6 deletions(-)
diff --git a/drivers/dma/xilinx/xdma-regs.h b/drivers/dma/xilinx/xdma-regs.h
index 98117e8a466f..98f5f6fb9ff9 100644
--- a/drivers/dma/xilinx/xdma-regs.h
+++ b/drivers/dma/xilinx/xdma-regs.h
@@ -64,9 +64,10 @@ struct xdma_hw_desc {
__le64 next_desc;
};
-#define XDMA_DESC_SIZE sizeof(struct xdma_hw_desc)
-#define XDMA_DESC_BLOCK_SIZE (XDMA_DESC_SIZE * XDMA_DESC_ADJACENT)
-#define XDMA_DESC_BLOCK_ALIGN 4096
+#define XDMA_DESC_SIZE sizeof(struct xdma_hw_desc)
+#define XDMA_DESC_BLOCK_SIZE (XDMA_DESC_SIZE * XDMA_DESC_ADJACENT)
+#define XDMA_DESC_BLOCK_ALIGN 32
+#define XDMA_DESC_BLOCK_BOUNDARY 4096
/*
* Channel registers
diff --git a/drivers/dma/xilinx/xdma.c b/drivers/dma/xilinx/xdma.c
index ddb9e7d07461..c22701e76b69 100644
--- a/drivers/dma/xilinx/xdma.c
+++ b/drivers/dma/xilinx/xdma.c
@@ -741,9 +741,8 @@ static int xdma_alloc_chan_resources(struct dma_chan *chan)
return -EINVAL;
}
- xdma_chan->desc_pool = dma_pool_create(dma_chan_name(chan),
- dev, XDMA_DESC_BLOCK_SIZE,
- XDMA_DESC_BLOCK_ALIGN, 0);
+ xdma_chan->desc_pool = dma_pool_create(dma_chan_name(chan), dev, XDMA_DESC_BLOCK_SIZE,
+ XDMA_DESC_BLOCK_ALIGN, XDMA_DESC_BLOCK_BOUNDARY);
if (!xdma_chan->desc_pool) {
xdma_err(xdev, "unable to allocate descriptor pool");
return -ENOMEM;
--
2.34.1
