ETZPC is a firewall controller. Put all peripherals filtered by the
ETZPC as ETZPC subnodes and keep the "simple-bus" compatible for
backward compatibility.
Signed-off-by: Gatien Chevallier <gatien.chevallier@xxxxxxxxxxx>
---
Changes in V7:
- Keep simple-bus compatible
- Remove access-controllers reference in this patch
Changes in V6:
- Renamed access-controller to access-controllers
- Removal of access-control-provider property
Changes in V5:
- Renamed feature-domain* to access-control*
arch/arm/boot/dts/st/stm32mp131.dtsi | 1037 +++++++++++++------------
arch/arm/boot/dts/st/stm32mp133.dtsi | 50 +-
arch/arm/boot/dts/st/stm32mp13xc.dtsi | 18 +-
arch/arm/boot/dts/st/stm32mp13xf.dtsi | 18 +-
4 files changed, 564 insertions(+), 559 deletions(-)
diff --git a/arch/arm/boot/dts/st/stm32mp131.dtsi b/arch/arm/boot/dts/st/stm32mp131.dtsi
index b04d24c939c3..6ba8e3fd43b0 100644
--- a/arch/arm/boot/dts/st/stm32mp131.dtsi
+++ b/arch/arm/boot/dts/st/stm32mp131.dtsi
@@ -745,340 +745,6 @@ dmamux1: dma-router@48002000 {
dma-channels = <16>;
};
- adc_2: adc@48004000 {
- compatible = "st,stm32mp13-adc-core";
- reg = <0x48004000 0x400>;
- interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&rcc ADC2>, <&rcc ADC2_K>;
- clock-names = "bus", "adc";
- interrupt-controller;
- #interrupt-cells = <1>;
- #address-cells = <1>;
- #size-cells = <0>;
- status = "disabled";
-
- adc2: adc@0 {
- compatible = "st,stm32mp13-adc";
- #io-channel-cells = <1>;
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0x0>;
- interrupt-parent = <&adc_2>;
- interrupts = <0>;
- dmas = <&dmamux1 10 0x400 0x80000001>;
- dma-names = "rx";
- status = "disabled";
-
- channel@13 {
- reg = <13>;
- label = "vrefint";
- };
- channel@14 {
- reg = <14>;
- label = "vddcore";
- };
- channel@16 {
- reg = <16>;
- label = "vddcpu";
- };
- channel@17 {
- reg = <17>;
- label = "vddq_ddr";
- };
- };
- };
-
- usbotg_hs: usb@49000000 {
- compatible = "st,stm32mp15-hsotg", "snps,dwc2";
- reg = <0x49000000 0x40000>;
- clocks = <&rcc USBO_K>;
- clock-names = "otg";
- resets = <&rcc USBO_R>;
- reset-names = "dwc2";
- interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
- g-rx-fifo-size = <512>;
- g-np-tx-fifo-size = <32>;
- g-tx-fifo-size = <256 16 16 16 16 16 16 16>;
- dr_mode = "otg";
- otg-rev = <0x200>;
- usb33d-supply = <&scmi_usb33>;
- status = "disabled";
- };
-
- usart1: serial@4c000000 {
- compatible = "st,stm32h7-uart";
- reg = <0x4c000000 0x400>;
- interrupts-extended = <&exti 26 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&rcc USART1_K>;
- resets = <&rcc USART1_R>;
- wakeup-source;
- dmas = <&dmamux1 41 0x400 0x5>,
- <&dmamux1 42 0x400 0x1>;
- dma-names = "rx", "tx";
- status = "disabled";
- };
-
- usart2: serial@4c001000 {
- compatible = "st,stm32h7-uart";
- reg = <0x4c001000 0x400>;
- interrupts-extended = <&exti 27 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&rcc USART2_K>;
- resets = <&rcc USART2_R>;
- wakeup-source;
- dmas = <&dmamux1 43 0x400 0x5>,
- <&dmamux1 44 0x400 0x1>;
- dma-names = "rx", "tx";
- status = "disabled";
- };
-
- i2s4: audio-controller@4c002000 {
- compatible = "st,stm32h7-i2s";
- reg = <0x4c002000 0x400>;
- #sound-dai-cells = <0>;
- interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
- dmas = <&dmamux1 83 0x400 0x01>,
- <&dmamux1 84 0x400 0x01>;
- dma-names = "rx", "tx";
- status = "disabled";
- };
-
- spi4: spi@4c002000 {
- compatible = "st,stm32h7-spi";
- reg = <0x4c002000 0x400>;
- interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&rcc SPI4_K>;
- resets = <&rcc SPI4_R>;
- #address-cells = <1>;
- #size-cells = <0>;
- dmas = <&dmamux1 83 0x400 0x01>,
- <&dmamux1 84 0x400 0x01>;
- dma-names = "rx", "tx";
- status = "disabled";
- };
-
- spi5: spi@4c003000 {
- compatible = "st,stm32h7-spi";
- reg = <0x4c003000 0x400>;
- interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&rcc SPI5_K>;
- resets = <&rcc SPI5_R>;
- #address-cells = <1>;
- #size-cells = <0>;
- dmas = <&dmamux1 85 0x400 0x01>,
- <&dmamux1 86 0x400 0x01>;
- dma-names = "rx", "tx";
- status = "disabled";
- };
-
- i2c3: i2c@4c004000 {
- compatible = "st,stm32mp13-i2c";
- reg = <0x4c004000 0x400>;
- interrupt-names = "event", "error";
- interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&rcc I2C3_K>;
- resets = <&rcc I2C3_R>;
- #address-cells = <1>;
- #size-cells = <0>;
- dmas = <&dmamux1 73 0x400 0x1>,
- <&dmamux1 74 0x400 0x1>;
- dma-names = "rx", "tx";
- st,syscfg-fmp = <&syscfg 0x4 0x4>;
- i2c-analog-filter;
- status = "disabled";
- };
-
- i2c4: i2c@4c005000 {
- compatible = "st,stm32mp13-i2c";
- reg = <0x4c005000 0x400>;
- interrupt-names = "event", "error";
- interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&rcc I2C4_K>;
- resets = <&rcc I2C4_R>;
- #address-cells = <1>;
- #size-cells = <0>;
- dmas = <&dmamux1 75 0x400 0x1>,
- <&dmamux1 76 0x400 0x1>;
- dma-names = "rx", "tx";
- st,syscfg-fmp = <&syscfg 0x4 0x8>;
- i2c-analog-filter;
- status = "disabled";
- };
-
- i2c5: i2c@4c006000 {
- compatible = "st,stm32mp13-i2c";
- reg = <0x4c006000 0x400>;
- interrupt-names = "event", "error";
- interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&rcc I2C5_K>;
- resets = <&rcc I2C5_R>;
- #address-cells = <1>;
- #size-cells = <0>;
- dmas = <&dmamux1 115 0x400 0x1>,
- <&dmamux1 116 0x400 0x1>;
- dma-names = "rx", "tx";
- st,syscfg-fmp = <&syscfg 0x4 0x10>;
- i2c-analog-filter;
- status = "disabled";
- };
-
- timers12: timer@4c007000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "st,stm32-timers";
- reg = <0x4c007000 0x400>;
- interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "global";
- clocks = <&rcc TIM12_K>;
- clock-names = "int";
- status = "disabled";
-
- pwm {
- compatible = "st,stm32-pwm";
- #pwm-cells = <3>;
- status = "disabled";
- };
-
- timer@11 {
- compatible = "st,stm32h7-timer-trigger";
- reg = <11>;
- status = "disabled";
- };
- };
-
- timers13: timer@4c008000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "st,stm32-timers";
- reg = <0x4c008000 0x400>;
- interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "global";
- clocks = <&rcc TIM13_K>;
- clock-names = "int";
- status = "disabled";
-
- pwm {
- compatible = "st,stm32-pwm";
- #pwm-cells = <3>;
- status = "disabled";
- };
-
- timer@12 {
- compatible = "st,stm32h7-timer-trigger";
- reg = <12>;
- status = "disabled";
- };
- };
-
- timers14: timer@4c009000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "st,stm32-timers";
- reg = <0x4c009000 0x400>;
- interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "global";
- clocks = <&rcc TIM14_K>;
- clock-names = "int";
- status = "disabled";
-
- pwm {
- compatible = "st,stm32-pwm";
- #pwm-cells = <3>;
- status = "disabled";
- };
-
- timer@13 {
- compatible = "st,stm32h7-timer-trigger";
- reg = <13>;
- status = "disabled";
- };
- };
-
- timers15: timer@4c00a000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "st,stm32-timers";
- reg = <0x4c00a000 0x400>;
- interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "global";
- clocks = <&rcc TIM15_K>;
- clock-names = "int";
- dmas = <&dmamux1 105 0x400 0x1>,
- <&dmamux1 106 0x400 0x1>,
- <&dmamux1 107 0x400 0x1>,
- <&dmamux1 108 0x400 0x1>;
- dma-names = "ch1", "up", "trig", "com";
- status = "disabled";
-
- pwm {
- compatible = "st,stm32-pwm";
- #pwm-cells = <3>;
- status = "disabled";
- };
-
- timer@14 {
- compatible = "st,stm32h7-timer-trigger";
- reg = <14>;
- status = "disabled";
- };
- };
-
- timers16: timer@4c00b000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "st,stm32-timers";
- reg = <0x4c00b000 0x400>;
- interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "global";
- clocks = <&rcc TIM16_K>;
- clock-names = "int";
- dmas = <&dmamux1 109 0x400 0x1>,
- <&dmamux1 110 0x400 0x1>;
- dma-names = "ch1", "up";
- status = "disabled";
-
- pwm {
- compatible = "st,stm32-pwm";
- #pwm-cells = <3>;
- status = "disabled";
- };
-
- timer@15 {
- compatible = "st,stm32h7-timer-trigger";
- reg = <15>;
- status = "disabled";
- };
- };
-
- timers17: timer@4c00c000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "st,stm32-timers";
- reg = <0x4c00c000 0x400>;
- interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "global";
- clocks = <&rcc TIM17_K>;
- clock-names = "int";
- dmas = <&dmamux1 111 0x400 0x1>,
- <&dmamux1 112 0x400 0x1>;
- dma-names = "ch1", "up";
- status = "disabled";
-
- pwm {
- compatible = "st,stm32-pwm";
- #pwm-cells = <3>;
- status = "disabled";
- };
-
- timer@16 {
- compatible = "st,stm32h7-timer-trigger";
- reg = <16>;
- status = "disabled";
- };
- };
-
rcc: rcc@50000000 {
compatible = "st,stm32mp13-rcc", "syscon";
reg = <0x50000000 0x1000>;
@@ -1105,69 +771,6 @@ syscfg: syscon@50020000 {
clocks = <&rcc SYSCFG>;
};
- lptimer2: timer@50021000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "st,stm32-lptimer";
- reg = <0x50021000 0x400>;
- interrupts-extended = <&exti 48 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&rcc LPTIM2_K>;
- clock-names = "mux";
- wakeup-source;
- status = "disabled";
-
- pwm {
- compatible = "st,stm32-pwm-lp";
- #pwm-cells = <3>;
- status = "disabled";
- };
-
- trigger@1 {
- compatible = "st,stm32-lptimer-trigger";
- reg = <1>;
- status = "disabled";
- };
-
- counter {
- compatible = "st,stm32-lptimer-counter";
- status = "disabled";
- };
-
- timer {
- compatible = "st,stm32-lptimer-timer";
- status = "disabled";
- };
- };
-
- lptimer3: timer@50022000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "st,stm32-lptimer";
- reg = <0x50022000 0x400>;
- interrupts-extended = <&exti 50 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&rcc LPTIM3_K>;
- clock-names = "mux";
- wakeup-source;
- status = "disabled";
-
- pwm {
- compatible = "st,stm32-pwm-lp";
- #pwm-cells = <3>;
- status = "disabled";
- };
-
- trigger@2 {
- compatible = "st,stm32-lptimer-trigger";
- reg = <2>;
- status = "disabled";
- };
-
- timer {
- compatible = "st,stm32-lptimer-timer";
- status = "disabled";
- };
- };
-
lptimer4: timer@50023000 {
compatible = "st,stm32-lptimer";
reg = <0x50023000 0x400>;
@@ -1210,25 +813,6 @@ timer {
};
};
- hash: hash@54003000 {
- compatible = "st,stm32mp13-hash";
- reg = <0x54003000 0x400>;
- interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&rcc HASH1>;
- resets = <&rcc HASH1_R>;
- dmas = <&mdma 30 0x2 0x1000a02 0x0 0x0>;
- dma-names = "in";
- status = "disabled";
- };
-
- rng: rng@54004000 {
- compatible = "st,stm32mp13-rng";
- reg = <0x54004000 0x400>;
- clocks = <&rcc RNG1_K>;
- resets = <&rcc RNG1_R>;
- status = "disabled";
- };
-
mdma: dma-controller@58000000 {
compatible = "st,stm32h7-mdma";
reg = <0x58000000 0x1000>;
@@ -1239,82 +823,6 @@ mdma: dma-controller@58000000 {
dma-requests = <48>;
};
- fmc: memory-controller@58002000 {
- compatible = "st,stm32mp1-fmc2-ebi";
- reg = <0x58002000 0x1000>;
- ranges = <0 0 0x60000000 0x04000000>, /* EBI CS 1 */
- <1 0 0x64000000 0x04000000>, /* EBI CS 2 */
- <2 0 0x68000000 0x04000000>, /* EBI CS 3 */
- <3 0 0x6c000000 0x04000000>, /* EBI CS 4 */
- <4 0 0x80000000 0x10000000>; /* NAND */
- #address-cells = <2>;
- #size-cells = <1>;
- clocks = <&rcc FMC_K>;
- resets = <&rcc FMC_R>;
- status = "disabled";
-
- nand-controller@4,0 {
- compatible = "st,stm32mp1-fmc2-nfc";
- reg = <4 0x00000000 0x1000>,
- <4 0x08010000 0x1000>,
- <4 0x08020000 0x1000>,
- <4 0x01000000 0x1000>,
- <4 0x09010000 0x1000>,
- <4 0x09020000 0x1000>;
- #address-cells = <1>;
- #size-cells = <0>;
- interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
- dmas = <&mdma 24 0x2 0x12000a02 0x0 0x0>,
- <&mdma 24 0x2 0x12000a08 0x0 0x0>,
- <&mdma 25 0x2 0x12000a0a 0x0 0x0>;
- dma-names = "tx", "rx", "ecc";
- status = "disabled";
- };
- };
-
- qspi: spi@58003000 {
- compatible = "st,stm32f469-qspi";
- reg = <0x58003000 0x1000>, <0x70000000 0x10000000>;
- reg-names = "qspi", "qspi_mm";
- #address-cells = <1>;
- #size-cells = <0>;
- interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
- dmas = <&mdma 26 0x2 0x10100002 0x0 0x0>,
- <&mdma 26 0x2 0x10100008 0x0 0x0>;
- dma-names = "tx", "rx";
- clocks = <&rcc QSPI_K>;
- resets = <&rcc QSPI_R>;
- status = "disabled";
- };
-
- sdmmc1: mmc@58005000 {
- compatible = "st,stm32-sdmmc2", "arm,pl18x", "arm,primecell";
- arm,primecell-periphid = <0x20253180>;
- reg = <0x58005000 0x1000>, <0x58006000 0x1000>;
- interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&rcc SDMMC1_K>;
- clock-names = "apb_pclk";
- resets = <&rcc SDMMC1_R>;
- cap-sd-highspeed;
- cap-mmc-highspeed;
- max-frequency = <130000000>;
- status = "disabled";
- };
-
- sdmmc2: mmc@58007000 {
- compatible = "st,stm32-sdmmc2", "arm,pl18x", "arm,primecell";
- arm,primecell-periphid = <0x20253180>;
- reg = <0x58007000 0x1000>, <0x58008000 0x1000>;
- interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&rcc SDMMC2_K>;
- clock-names = "apb_pclk";
- resets = <&rcc SDMMC2_R>;
- cap-sd-highspeed;
- cap-mmc-highspeed;
- max-frequency = <130000000>;
- status = "disabled";
- };
-
usbh_ohci: usb@5800c000 {
compatible = "generic-ohci";
reg = <0x5800c000 0x1000>;
@@ -1342,29 +850,6 @@ iwdg2: watchdog@5a002000 {
status = "disabled";
};
- usbphyc: usbphyc@5a006000 {
- #address-cells = <1>;
- #size-cells = <0>;
- #clock-cells = <0>;
- compatible = "st,stm32mp1-usbphyc";
- reg = <0x5a006000 0x1000>;
- clocks = <&rcc USBPHY_K>;
- resets = <&rcc USBPHY_R>;
- vdda1v1-supply = <&scmi_reg11>;
- vdda1v8-supply = <&scmi_reg18>;
- status = "disabled";
-
- usbphyc_port0: usb-phy@0 {
- #phy-cells = <0>;
- reg = <0>;
- };
-
- usbphyc_port1: usb-phy@1 {
- #phy-cells = <1>;
- reg = <1>;
- };
- };
-
rtc: rtc@5c004000 {
compatible = "st,stm32mp1-rtc";
reg = <0x5c004000 0x400>;
@@ -1393,6 +878,527 @@ ts_cal2: calib@5e {
};
};
+ etzpc: bus@5c007000 {
+ compatible = "st,stm32-etzpc", "simple-bus";
+ reg = <0x5c007000 0x400>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ adc_2: adc@48004000 {
+ compatible = "st,stm32mp13-adc-core";
+ reg = <0x48004000 0x400>;
+ interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rcc ADC2>, <&rcc ADC2_K>;
+ clock-names = "bus", "adc";
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+
+ adc2: adc@0 {
+ compatible = "st,stm32mp13-adc";
+ #io-channel-cells = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x0>;
+ interrupt-parent = <&adc_2>;
+ interrupts = <0>;
+ dmas = <&dmamux1 10 0x400 0x80000001>;
+ dma-names = "rx";
+ status = "disabled";
+
+ channel@13 {
+ reg = <13>;
+ label = "vrefint";
+ };
+ channel@14 {
+ reg = <14>;
+ label = "vddcore";
+ };
+ channel@16 {
+ reg = <16>;
+ label = "vddcpu";
+ };
+ channel@17 {
+ reg = <17>;
+ label = "vddq_ddr";
+ };
+ };
+ };
+
+ usbotg_hs: usb@49000000 {
+ compatible = "st,stm32mp15-hsotg", "snps,dwc2";
+ reg = <0x49000000 0x40000>;
+ clocks = <&rcc USBO_K>;
+ clock-names = "otg";
+ resets = <&rcc USBO_R>;
+ reset-names = "dwc2";
+ interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+ g-rx-fifo-size = <512>;
+ g-np-tx-fifo-size = <32>;
+ g-tx-fifo-size = <256 16 16 16 16 16 16 16>;
+ dr_mode = "otg";
+ otg-rev = <0x200>;
+ usb33d-supply = <&scmi_usb33>;
+ status = "disabled";
+ };
+
+ usart1: serial@4c000000 {
+ compatible = "st,stm32h7-uart";
+ reg = <0x4c000000 0x400>;
+ interrupts-extended = <&exti 26 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rcc USART1_K>;
+ resets = <&rcc USART1_R>;
+ wakeup-source;
+ dmas = <&dmamux1 41 0x400 0x5>,
+ <&dmamux1 42 0x400 0x1>;
+ dma-names = "rx", "tx";
+ status = "disabled";
+ };
+
+ usart2: serial@4c001000 {
+ compatible = "st,stm32h7-uart";
+ reg = <0x4c001000 0x400>;
+ interrupts-extended = <&exti 27 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rcc USART2_K>;
+ resets = <&rcc USART2_R>;
+ wakeup-source;
+ dmas = <&dmamux1 43 0x400 0x5>,
+ <&dmamux1 44 0x400 0x1>;
+ dma-names = "rx", "tx";
+ status = "disabled";
+ };
+
+ i2s4: audio-controller@4c002000 {
+ compatible = "st,stm32h7-i2s";
+ reg = <0x4c002000 0x400>;
+ #sound-dai-cells = <0>;
+ interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&dmamux1 83 0x400 0x01>,
+ <&dmamux1 84 0x400 0x01>;
+ dma-names = "rx", "tx";
+ status = "disabled";
+ };
+
+ spi4: spi@4c002000 {
+ compatible = "st,stm32h7-spi";
+ reg = <0x4c002000 0x400>;
+ interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rcc SPI4_K>;
+ resets = <&rcc SPI4_R>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ dmas = <&dmamux1 83 0x400 0x01>,
+ <&dmamux1 84 0x400 0x01>;
+ dma-names = "rx", "tx";
+ status = "disabled";
+ };
+
+ spi5: spi@4c003000 {
+ compatible = "st,stm32h7-spi";
+ reg = <0x4c003000 0x400>;
+ interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rcc SPI5_K>;
+ resets = <&rcc SPI5_R>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ dmas = <&dmamux1 85 0x400 0x01>,
+ <&dmamux1 86 0x400 0x01>;
+ dma-names = "rx", "tx";
+ status = "disabled";
+ };
+
+ i2c3: i2c@4c004000 {
+ compatible = "st,stm32mp13-i2c";
+ reg = <0x4c004000 0x400>;
+ interrupt-names = "event", "error";
+ interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rcc I2C3_K>;
+ resets = <&rcc I2C3_R>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ dmas = <&dmamux1 73 0x400 0x1>,
+ <&dmamux1 74 0x400 0x1>;
+ dma-names = "rx", "tx";
+ st,syscfg-fmp = <&syscfg 0x4 0x4>;
+ i2c-analog-filter;
+ status = "disabled";
+ };
+
+ i2c4: i2c@4c005000 {
+ compatible = "st,stm32mp13-i2c";
+ reg = <0x4c005000 0x400>;
+ interrupt-names = "event", "error";
+ interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rcc I2C4_K>;
+ resets = <&rcc I2C4_R>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ dmas = <&dmamux1 75 0x400 0x1>,
+ <&dmamux1 76 0x400 0x1>;
+ dma-names = "rx", "tx";
+ st,syscfg-fmp = <&syscfg 0x4 0x8>;
+ i2c-analog-filter;
+ status = "disabled";
+ };
+
+ i2c5: i2c@4c006000 {
+ compatible = "st,stm32mp13-i2c";
+ reg = <0x4c006000 0x400>;
+ interrupt-names = "event", "error";
+ interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rcc I2C5_K>;
+ resets = <&rcc I2C5_R>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ dmas = <&dmamux1 115 0x400 0x1>,
+ <&dmamux1 116 0x400 0x1>;
+ dma-names = "rx", "tx";
+ st,syscfg-fmp = <&syscfg 0x4 0x10>;
+ i2c-analog-filter;
+ status = "disabled";
+ };
+
+ timers12: timer@4c007000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "st,stm32-timers";
+ reg = <0x4c007000 0x400>;
+ interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "global";
+ clocks = <&rcc TIM12_K>;
+ clock-names = "int";
+ status = "disabled";
+
+ pwm {
+ compatible = "st,stm32-pwm";
+ #pwm-cells = <3>;
+ status = "disabled";
+ };
+
+ timer@11 {
+ compatible = "st,stm32h7-timer-trigger";
+ reg = <11>;
+ status = "disabled";
+ };
+ };
+
+ timers13: timer@4c008000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "st,stm32-timers";
+ reg = <0x4c008000 0x400>;
+ interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "global";
+ clocks = <&rcc TIM13_K>;
+ clock-names = "int";
+ status = "disabled";
+
+ pwm {
+ compatible = "st,stm32-pwm";
+ #pwm-cells = <3>;
+ status = "disabled";
+ };
+
+ timer@12 {
+ compatible = "st,stm32h7-timer-trigger";
+ reg = <12>;
+ status = "disabled";
+ };
+ };
+
+ timers14: timer@4c009000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "st,stm32-timers";
+ reg = <0x4c009000 0x400>;
+ interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "global";
+ clocks = <&rcc TIM14_K>;
+ clock-names = "int";
+ status = "disabled";
+
+ pwm {
+ compatible = "st,stm32-pwm";
+ #pwm-cells = <3>;
+ status = "disabled";
+ };
+
+ timer@13 {
+ compatible = "st,stm32h7-timer-trigger";
+ reg = <13>;
+ status = "disabled";
+ };
+ };
+
+ timers15: timer@4c00a000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "st,stm32-timers";
+ reg = <0x4c00a000 0x400>;
+ interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "global";
+ clocks = <&rcc TIM15_K>;
+ clock-names = "int";
+ dmas = <&dmamux1 105 0x400 0x1>,
+ <&dmamux1 106 0x400 0x1>,
+ <&dmamux1 107 0x400 0x1>,
+ <&dmamux1 108 0x400 0x1>;
+ dma-names = "ch1", "up", "trig", "com";
+ status = "disabled";
+
+ pwm {
+ compatible = "st,stm32-pwm";
+ #pwm-cells = <3>;
+ status = "disabled";
+ };
+
+ timer@14 {
+ compatible = "st,stm32h7-timer-trigger";
+ reg = <14>;
+ status = "disabled";
+ };
+ };
+
+ timers16: timer@4c00b000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "st,stm32-timers";
+ reg = <0x4c00b000 0x400>;
+ interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "global";
+ clocks = <&rcc TIM16_K>;
+ clock-names = "int";
+ dmas = <&dmamux1 109 0x400 0x1>,
+ <&dmamux1 110 0x400 0x1>;
+ dma-names = "ch1", "up";
+ status = "disabled";
+
+ pwm {
+ compatible = "st,stm32-pwm";
+ #pwm-cells = <3>;
+ status = "disabled";
+ };
+
+ timer@15 {
+ compatible = "st,stm32h7-timer-trigger";
+ reg = <15>;
+ status = "disabled";
+ };
+ };
+
+ timers17: timer@4c00c000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "st,stm32-timers";
+ reg = <0x4c00c000 0x400>;
+ interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "global";
+ clocks = <&rcc TIM17_K>;
+ clock-names = "int";
+ dmas = <&dmamux1 111 0x400 0x1>,
+ <&dmamux1 112 0x400 0x1>;
+ dma-names = "ch1", "up";
+ status = "disabled";
+
+ pwm {
+ compatible = "st,stm32-pwm";
+ #pwm-cells = <3>;
+ status = "disabled";
+ };
+
+ timer@16 {
+ compatible = "st,stm32h7-timer-trigger";
+ reg = <16>;
+ status = "disabled";
+ };
+ };
+
+ lptimer2: timer@50021000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "st,stm32-lptimer";
+ reg = <0x50021000 0x400>;
+ interrupts-extended = <&exti 48 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rcc LPTIM2_K>;
+ clock-names = "mux";
+ wakeup-source;
+ status = "disabled";
+
+ pwm {
+ compatible = "st,stm32-pwm-lp";
+ #pwm-cells = <3>;
+ status = "disabled";
+ };
+
+ trigger@1 {
+ compatible = "st,stm32-lptimer-trigger";
+ reg = <1>;
+ status = "disabled";
+ };
+
+ counter {
+ compatible = "st,stm32-lptimer-counter";
+ status = "disabled";
+ };
+
+ timer {
+ compatible = "st,stm32-lptimer-timer";
+ status = "disabled";
+ };
+ };
+
+ lptimer3: timer@50022000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "st,stm32-lptimer";
+ reg = <0x50022000 0x400>;
+ interrupts-extended = <&exti 50 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rcc LPTIM3_K>;
+ clock-names = "mux";
+ wakeup-source;
+ status = "disabled";
+
+ pwm {
+ compatible = "st,stm32-pwm-lp";
+ #pwm-cells = <3>;
+ status = "disabled";
+ };
+
+ trigger@2 {
+ compatible = "st,stm32-lptimer-trigger";
+ reg = <2>;
+ status = "disabled";
+ };
+
+ timer {
+ compatible = "st,stm32-lptimer-timer";
+ status = "disabled";
+ };
+ };
+
+ hash: hash@54003000 {
+ compatible = "st,stm32mp13-hash";
+ reg = <0x54003000 0x400>;
+ interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rcc HASH1>;
+ resets = <&rcc HASH1_R>;
+ dmas = <&mdma 30 0x2 0x1000a02 0x0 0x0>;
+ dma-names = "in";
+ };
+
+ rng: rng@54004000 {
+ compatible = "st,stm32mp13-rng";
+ reg = <0x54004000 0x400>;
+ clocks = <&rcc RNG1_K>;
+ resets = <&rcc RNG1_R>;
+ };
+
+ fmc: memory-controller@58002000 {
+ compatible = "st,stm32mp1-fmc2-ebi";
+ reg = <0x58002000 0x1000>;
+ ranges = <0 0 0x60000000 0x04000000>, /* EBI CS 1 */
+ <1 0 0x64000000 0x04000000>, /* EBI CS 2 */
+ <2 0 0x68000000 0x04000000>, /* EBI CS 3 */
+ <3 0 0x6c000000 0x04000000>, /* EBI CS 4 */
+ <4 0 0x80000000 0x10000000>; /* NAND */
+ #address-cells = <2>;
+ #size-cells = <1>;
+ clocks = <&rcc FMC_K>;
+ resets = <&rcc FMC_R>;
+ status = "disabled";
+
+ nand-controller@4,0 {
+ compatible = "st,stm32mp1-fmc2-nfc";
+ reg = <4 0x00000000 0x1000>,
+ <4 0x08010000 0x1000>,
+ <4 0x08020000 0x1000>,
+ <4 0x01000000 0x1000>,
+ <4 0x09010000 0x1000>,
+ <4 0x09020000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&mdma 24 0x2 0x12000a02 0x0 0x0>,
+ <&mdma 24 0x2 0x12000a08 0x0 0x0>,
+ <&mdma 25 0x2 0x12000a0a 0x0 0x0>;
+ dma-names = "tx", "rx", "ecc";
+ status = "disabled";
+ };
+ };
+
+ qspi: spi@58003000 {
+ compatible = "st,stm32f469-qspi";
+ reg = <0x58003000 0x1000>, <0x70000000 0x10000000>;
+ reg-names = "qspi", "qspi_mm";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&mdma 26 0x2 0x10100002 0x0 0x0>,
+ <&mdma 26 0x2 0x10100008 0x0 0x0>;
+ dma-names = "tx", "rx";
+ clocks = <&rcc QSPI_K>;
+ resets = <&rcc QSPI_R>;
+ status = "disabled";
+ };
+
+ sdmmc1: mmc@58005000 {
+ compatible = "st,stm32-sdmmc2", "arm,pl18x", "arm,primecell";
+ arm,primecell-periphid = <0x20253180>;
+ reg = <0x58005000 0x1000>, <0x58006000 0x1000>;
+ interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rcc SDMMC1_K>;
+ clock-names = "apb_pclk";
+ resets = <&rcc SDMMC1_R>;
+ cap-sd-highspeed;
+ cap-mmc-highspeed;
+ max-frequency = <130000000>;
+ status = "disabled";
+ };
+
+ sdmmc2: mmc@58007000 {
+ compatible = "st,stm32-sdmmc2", "arm,pl18x", "arm,primecell";
+ arm,primecell-periphid = <0x20253180>;
+ reg = <0x58007000 0x1000>, <0x58008000 0x1000>;
+ interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rcc SDMMC2_K>;
+ clock-names = "apb_pclk";
+ resets = <&rcc SDMMC2_R>;
+ cap-sd-highspeed;
+ cap-mmc-highspeed;
+ max-frequency = <130000000>;
+ status = "disabled";
+ };
+
+ usbphyc: usbphyc@5a006000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #clock-cells = <0>;
+ compatible = "st,stm32mp1-usbphyc";
+ reg = <0x5a006000 0x1000>;
+ clocks = <&rcc USBPHY_K>;
+ resets = <&rcc USBPHY_R>;
+ vdda1v1-supply = <&scmi_reg11>;
+ vdda1v8-supply = <&scmi_reg18>;
+ status = "disabled";
+
+ usbphyc_port0: usb-phy@0 {
+ #phy-cells = <0>;
+ reg = <0>;
+ };
+
+ usbphyc_port1: usb-phy@1 {
+ #phy-cells = <1>;
+ reg = <1>;
+ };
+ };
+ };
+
/*
* Break node order to solve dependency probe issue between
* pinctrl and exti.
@@ -1404,6 +1410,7 @@ pinctrl: pinctrl@50002000 {
ranges = <0 0x50002000 0x8400>;
interrupt-parent = <&exti>;
st,syscfg = <&exti 0x60 0xff>;
+ pins-are-numbered;
gpioa: gpio@50002000 {
gpio-controller;
diff --git a/arch/arm/boot/dts/st/stm32mp133.dtsi b/arch/arm/boot/dts/st/stm32mp133.dtsi
index df451c3c2a26..c4d3a520c14b 100644
--- a/arch/arm/boot/dts/st/stm32mp133.dtsi
+++ b/arch/arm/boot/dts/st/stm32mp133.dtsi
@@ -33,35 +33,37 @@ m_can2: can@4400f000 {
bosch,mram-cfg = <0x1400 0 0 32 0 0 2 2>;
status = "disabled";
};
+ };
+};
- adc_1: adc@48003000 {
- compatible = "st,stm32mp13-adc-core";
- reg = <0x48003000 0x400>;
- interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&rcc ADC1>, <&rcc ADC1_K>;
- clock-names = "bus", "adc";
- interrupt-controller;
- #interrupt-cells = <1>;
+&etzpc {
+ adc_1: adc@48003000 {
+ compatible = "st,stm32mp13-adc-core";
+ reg = <0x48003000 0x400>;
+ interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rcc ADC1>, <&rcc ADC1_K>;
+ clock-names = "bus", "adc";
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+
+ adc1: adc@0 {
+ compatible = "st,stm32mp13-adc";
+ #io-channel-cells = <1>;
#address-cells = <1>;
#size-cells = <0>;
+ reg = <0x0>;
+ interrupt-parent = <&adc_1>;
+ interrupts = <0>;
+ dmas = <&dmamux1 9 0x400 0x80000001>;
+ dma-names = "rx";
status = "disabled";
- adc1: adc@0 {
- compatible = "st,stm32mp13-adc";
- #io-channel-cells = <1>;
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0x0>;
- interrupt-parent = <&adc_1>;
- interrupts = <0>;
- dmas = <&dmamux1 9 0x400 0x80000001>;
- dma-names = "rx";
- status = "disabled";
-
- channel@18 {
- reg = <18>;
- label = "vrefint";
- };
+ channel@18 {
+ reg = <18>;
+ label = "vrefint";
};
};
};
diff --git a/arch/arm/boot/dts/st/stm32mp13xc.dtsi b/arch/arm/boot/dts/st/stm32mp13xc.dtsi
index 4d00e7592882..b9fb071a1471 100644
--- a/arch/arm/boot/dts/st/stm32mp13xc.dtsi
+++ b/arch/arm/boot/dts/st/stm32mp13xc.dtsi
@@ -4,15 +4,13 @@
* Author: Alexandre Torgue <alexandre.torgue@xxxxxxxxxxx> for STMicroelectronics.
*/
-/ {
- soc {
- cryp: crypto@54002000 {
- compatible = "st,stm32mp1-cryp";
- reg = <0x54002000 0x400>;
- interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&rcc CRYP1>;
- resets = <&rcc CRYP1_R>;
- status = "disabled";
- };
+&etzpc {
+ cryp: crypto@54002000 {
+ compatible = "st,stm32mp1-cryp";
+ reg = <0x54002000 0x400>;
+ interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rcc CRYP1>;
+ resets = <&rcc CRYP1_R>;
+ status = "disabled";
};
};
diff --git a/arch/arm/boot/dts/st/stm32mp13xf.dtsi b/arch/arm/boot/dts/st/stm32mp13xf.dtsi
index 4d00e7592882..b9fb071a1471 100644
--- a/arch/arm/boot/dts/st/stm32mp13xf.dtsi
+++ b/arch/arm/boot/dts/st/stm32mp13xf.dtsi
@@ -4,15 +4,13 @@
* Author: Alexandre Torgue <alexandre.torgue@xxxxxxxxxxx> for STMicroelectronics.
*/
-/ {
- soc {
- cryp: crypto@54002000 {
- compatible = "st,stm32mp1-cryp";
- reg = <0x54002000 0x400>;
- interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&rcc CRYP1>;
- resets = <&rcc CRYP1_R>;
- status = "disabled";
- };
+&etzpc {
+ cryp: crypto@54002000 {
+ compatible = "st,stm32mp1-cryp";
+ reg = <0x54002000 0x400>;
+ interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rcc CRYP1>;
+ resets = <&rcc CRYP1_R>;
+ status = "disabled";
};
};
--
2.25.1
