SSI and SPDIF are dual fifo interface, when support ASRC P2P with SSI and SPDIF, the src fifo or dst fifo number can be two. The p2p watermark level bit 13 and 14 are designed for these use case. This patch is to complete this function in driver. Signed-off-by: Shengjiu Wang <shengjiu.wang@xxxxxxx> Signed-off-by: Joy Zou <joy.zou@xxxxxxx> --- drivers/dma/imx-sdma.c | 18 +++++++++++++++++- 1 file changed, 17 insertions(+), 1 deletion(-) diff --git a/drivers/dma/imx-sdma.c b/drivers/dma/imx-sdma.c index f81ecf5863e8..892e23cc0ce8 100644 --- a/drivers/dma/imx-sdma.c +++ b/drivers/dma/imx-sdma.c @@ -137,7 +137,11 @@ * 0: Source on AIPS * 12 Destination Bit(DP) 1: Destination on SPBA * 0: Destination on AIPS - * 13-15 --------- MUST BE 0 + * 13 Source FIFO 1: Source is dual FIFO + * 0: Source is single FIFO + * 14 Destination FIFO 1: Destination is dual FIFO + * 0: Destination is single FIFO + * 15 --------- MUST BE 0 * 16-23 Higher WML HWML * 24-27 N Total number of samples after * which Pad adding/Swallowing @@ -168,6 +172,8 @@ #define SDMA_WATERMARK_LEVEL_SPDIF BIT(10) #define SDMA_WATERMARK_LEVEL_SP BIT(11) #define SDMA_WATERMARK_LEVEL_DP BIT(12) +#define SDMA_WATERMARK_LEVEL_SD BIT(13) +#define SDMA_WATERMARK_LEVEL_DD BIT(14) #define SDMA_WATERMARK_LEVEL_HWML (0xFF << 16) #define SDMA_WATERMARK_LEVEL_LWE BIT(28) #define SDMA_WATERMARK_LEVEL_HWE BIT(29) @@ -1259,6 +1265,16 @@ static void sdma_set_watermarklevel_for_p2p(struct sdma_channel *sdmac) sdmac->watermark_level |= SDMA_WATERMARK_LEVEL_DP; sdmac->watermark_level |= SDMA_WATERMARK_LEVEL_CONT; + + /* + * Limitation: The p2p script support dual fifos in maximum, + * So when fifo number is larger than 1, force enable dual + * fifos. + */ + if (sdmac->n_fifos_src > 1) + sdmac->watermark_level |= SDMA_WATERMARK_LEVEL_SD; + if (sdmac->n_fifos_dst > 1) + sdmac->watermark_level |= SDMA_WATERMARK_LEVEL_DD; } static void sdma_set_watermarklevel_for_sais(struct sdma_channel *sdmac) -- 2.34.1
