[PATCH 0/3] dt-bindings: dma: ti: k3* : Update optional reg regions

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]


DMAs on TI K3 SoCs have channel configuration registers region which are
usually hidden from Linux and configured via Device Manager Firmware
APIs. But certain early SWs like bootloader which run before Device
Manager is fully up would need to directly configure these registers and
thus require to be in DT description.

This add bindings for such configuration regions.  Backward
compatibility is maintained to existing DT by only mandating existing
regions to be present and this new region as optional.

Vignesh Raghavendra (3):
  dt-bindings: dma: ti: k3-bcdma: Describe cfg register regions
  dt-bindings: dma: ti: k3-pktdma: Describe cfg register regions
  dt-bindings: dma: ti: k3-udma: Describe cfg register regions

 .../devicetree/bindings/dma/ti/k3-bcdma.yaml  | 25 +++++++++++++------
 .../devicetree/bindings/dma/ti/k3-pktdma.yaml | 18 ++++++++++---
 .../devicetree/bindings/dma/ti/k3-udma.yaml   | 14 ++++++++---
 3 files changed, 43 insertions(+), 14 deletions(-)


[Index of Archives]     [Linux Kernel]     [Linux ARM (vger)]     [Linux ARM MSM]     [Linux Omap]     [Linux Arm]     [Linux Tegra]     [Fedora ARM]     [Linux for Samsung SOC]     [eCos]     [Linux PCI]     [Linux Fastboot]     [Gcc Help]     [Git]     [DCCP]     [IETF Announce]     [Security]     [Linux MIPS]     [Yosemite Campsites]

  Powered by Linux