Re: [V2] dmaengine: qcom: gpi: Set link_rx bit on GO TRE for rx operation

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi,

On Fri, Dec 16, 2022 at 9:38 AM Vijaya Krishna Nivarthi
<quic_vnivarth@xxxxxxxxxxx> wrote:
>
> Rx operation on SPI GSI DMA is currently not working.
> As per GSI spec, link_rx bit is to be set on GO TRE on tx
> channel whenever there is going to be a DMA TRE on rx
> channel. This is currently set for duplex operation only.
>
> Set the bit for rx operation as well.
> This is part of changes required to bring up Rx.
>
> Fixes: 94b8f0e58fa1 ("dmaengine: qcom: gpi: set chain and link flag for duplex")
> Signed-off-by: Vijaya Krishna Nivarthi <quic_vnivarth@xxxxxxxxxxx>
> ---
> v1 -> v2:
> - updated change description
> ---
>  drivers/dma/qcom/gpi.c | 1 +
>  1 file changed, 1 insertion(+)

Without knowing anything about how the hardware actually works, I can
say that the change looks OK to me.

Reviewed-by: Douglas Anderson <dianders@xxxxxxxxxxxx>



[Index of Archives]     [Linux Kernel]     [Linux ARM (vger)]     [Linux ARM MSM]     [Linux Omap]     [Linux Arm]     [Linux Tegra]     [Fedora ARM]     [Linux for Samsung SOC]     [eCos]     [Linux PCI]     [Linux Fastboot]     [Gcc Help]     [Git]     [DCCP]     [IETF Announce]     [Security]     [Linux MIPS]     [Yosemite Campsites]

  Powered by Linux