On Tue, Nov 15, 2022 at 05:38:23PM +0800, Joy Zou wrote:
> The hdmi script already supported in sdma firmware. So add support hdmi
> in sdma driver.
>
> The design of hdmi script is different from common script such as sai.
> There is no need to config buffer descriptor for HDMI. The cyclic
> capability is achieved by the hdmi script. The slave config is so simple,
> only config src_addr, dts_addr and direction DMA_TRANS_NONE.
>
> Signed-off-by: Joy Zou <joy.zou@xxxxxxx>
Reviewed-by: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
Sascha
> ---
> Changes in v7:
> modify the commit message.
> ---
> drivers/dma/imx-sdma.c | 38 +++++++++++++++++++++++++++++--------
> include/linux/dma/imx-dma.h | 1 +
> 2 files changed, 31 insertions(+), 8 deletions(-)
>
> diff --git a/drivers/dma/imx-sdma.c b/drivers/dma/imx-sdma.c
> index fbea5f62dd98..ab877ceeac3f 100644
> --- a/drivers/dma/imx-sdma.c
> +++ b/drivers/dma/imx-sdma.c
> @@ -954,7 +954,10 @@ static irqreturn_t sdma_int_handler(int irq, void *dev_id)
> desc = sdmac->desc;
> if (desc) {
> if (sdmac->flags & IMX_DMA_SG_LOOP) {
> - sdma_update_channel_loop(sdmac);
> + if (sdmac->peripheral_type != IMX_DMATYPE_HDMI)
> + sdma_update_channel_loop(sdmac);
> + else
> + vchan_cyclic_callback(&desc->vd);
> } else {
> mxc_sdma_handle_channel_normal(sdmac);
> vchan_cookie_complete(&desc->vd);
> @@ -1074,6 +1077,10 @@ static int sdma_get_pc(struct sdma_channel *sdmac,
> per_2_emi = sdma->script_addrs->sai_2_mcu_addr;
> emi_2_per = sdma->script_addrs->mcu_2_sai_addr;
> break;
> + case IMX_DMATYPE_HDMI:
> + emi_2_per = sdma->script_addrs->hdmi_dma_addr;
> + sdmac->is_ram_script = true;
> + break;
> default:
> dev_err(sdma->dev, "Unsupported transfer type %d\n",
> peripheral_type);
> @@ -1125,11 +1132,16 @@ static int sdma_load_context(struct sdma_channel *sdmac)
> /* Send by context the event mask,base address for peripheral
> * and watermark level
> */
> - context->gReg[0] = sdmac->event_mask[1];
> - context->gReg[1] = sdmac->event_mask[0];
> - context->gReg[2] = sdmac->per_addr;
> - context->gReg[6] = sdmac->shp_addr;
> - context->gReg[7] = sdmac->watermark_level;
> + if (sdmac->peripheral_type == IMX_DMATYPE_HDMI) {
> + context->gReg[4] = sdmac->per_addr;
> + context->gReg[6] = sdmac->shp_addr;
> + } else {
> + context->gReg[0] = sdmac->event_mask[1];
> + context->gReg[1] = sdmac->event_mask[0];
> + context->gReg[2] = sdmac->per_addr;
> + context->gReg[6] = sdmac->shp_addr;
> + context->gReg[7] = sdmac->watermark_level;
> + }
>
> bd0->mode.command = C0_SETDM;
> bd0->mode.status = BD_DONE | BD_WRAP | BD_EXTD;
> @@ -1513,7 +1525,7 @@ static struct sdma_desc *sdma_transfer_init(struct sdma_channel *sdmac,
> desc->sdmac = sdmac;
> desc->num_bd = bds;
>
> - if (sdma_alloc_bd(desc))
> + if (bds && sdma_alloc_bd(desc))
> goto err_desc_out;
>
> /* No slave_config called in MEMCPY case, so do here */
> @@ -1678,13 +1690,16 @@ static struct dma_async_tx_descriptor *sdma_prep_dma_cyclic(
> {
> struct sdma_channel *sdmac = to_sdma_chan(chan);
> struct sdma_engine *sdma = sdmac->sdma;
> - int num_periods = buf_len / period_len;
> + int num_periods = 0;
> int channel = sdmac->channel;
> int i = 0, buf = 0;
> struct sdma_desc *desc;
>
> dev_dbg(sdma->dev, "%s channel: %d\n", __func__, channel);
>
> + if (sdmac->peripheral_type != IMX_DMATYPE_HDMI)
> + num_periods = buf_len / period_len;
> +
> sdma_config_write(chan, &sdmac->slave_config, direction);
>
> desc = sdma_transfer_init(sdmac, direction, num_periods);
> @@ -1701,6 +1716,9 @@ static struct dma_async_tx_descriptor *sdma_prep_dma_cyclic(
> goto err_bd_out;
> }
>
> + if (sdmac->peripheral_type == IMX_DMATYPE_HDMI)
> + return vchan_tx_prep(&sdmac->vc, &desc->vd, flags);
> +
> while (buf < buf_len) {
> struct sdma_buffer_descriptor *bd = &desc->bd[i];
> int param;
> @@ -1761,6 +1779,10 @@ static int sdma_config_write(struct dma_chan *chan,
> sdmac->watermark_level |= (dmaengine_cfg->dst_maxburst << 16) &
> SDMA_WATERMARK_LEVEL_HWML;
> sdmac->word_size = dmaengine_cfg->dst_addr_width;
> + } else if (sdmac->peripheral_type == IMX_DMATYPE_HDMI) {
> + sdmac->per_address = dmaengine_cfg->dst_addr;
> + sdmac->per_address2 = dmaengine_cfg->src_addr;
> + sdmac->watermark_level = 0;
> } else {
> sdmac->per_address = dmaengine_cfg->dst_addr;
> sdmac->watermark_level = dmaengine_cfg->dst_maxburst *
> diff --git a/include/linux/dma/imx-dma.h b/include/linux/dma/imx-dma.h
> index f487a4fa103a..cfec5f946e23 100644
> --- a/include/linux/dma/imx-dma.h
> +++ b/include/linux/dma/imx-dma.h
> @@ -40,6 +40,7 @@ enum sdma_peripheral_type {
> IMX_DMATYPE_ASRC_SP, /* Shared ASRC */
> IMX_DMATYPE_SAI, /* SAI */
> IMX_DMATYPE_MULTI_SAI, /* MULTI FIFOs For Audio */
> + IMX_DMATYPE_HDMI, /* HDMI Audio */
> };
>
> enum imx_dma_prio {
> --
> 2.37.1
>
>
--
Pengutronix e.K. | |
Steuerwalder Str. 21 | http://www.pengutronix.de/ |
31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
