Baolin Wang <baolin.wang@xxxxxxxxxxxxxxxxx> 于2022年9月30日周五 14:42写道：
>
> Hi Cixi,
>
> On 9/30/2022 1:53 PM, Cixi Geng wrote:
> > From: Cixi Geng <cixi.geng1@xxxxxxxxxx>
> >
> > Audio need to request Audio CP global dma interrupt, so Audio CP
> > DMA should support two-stage interrupt to adapte it.
> > It will occur interrupt when two-stage dma channel transfer done.
>
> If the AP does not want the interrupt, why not just set SPRD_DMA_NO_INT?
>
> I am struggling to understand the whole requirement, could you elaborate?
>
The AP should deal with the interrupt. I wrote the wrong conditions.
AP handle different interrupts about the 2-stage dma channel.
> >
> > Signed-off-by: Cixi Geng <cixi.geng1@xxxxxxxxxx>
> > ---
> > drivers/dma/sprd-dma.c | 8 ++++----
> > include/linux/dma/sprd-dma.h | 12 ++++++++++++
> > 2 files changed, 16 insertions(+), 4 deletions(-)
> >
> > diff --git a/drivers/dma/sprd-dma.c b/drivers/dma/sprd-dma.c
> > index 474d3ba8ec9f..7a9ade422a00 100644
> > --- a/drivers/dma/sprd-dma.c
> > +++ b/drivers/dma/sprd-dma.c
> > @@ -441,7 +441,7 @@ static int sprd_dma_set_2stage_config(struct sprd_dma_chn *schan)
> > val = chn & SPRD_DMA_GLB_SRC_CHN_MASK;
> > val |= BIT(schan->trg_mode - 1) << SPRD_DMA_GLB_TRG_OFFSET;
> > val |= SPRD_DMA_GLB_2STAGE_EN;
> > - if (schan->int_type != SPRD_DMA_NO_INT)
> > + if (schan->int_type != SPRD_DMA_SRC_CHN0_INT)
> > val |= SPRD_DMA_GLB_SRC_INT;
>
> That does not make sense to me. If user configues the interrupt type as
> SPRD_DMA_NO_INT, the code will still enable the source interrupt.
>
> If user configures the interrupt type as SPRD_DMA_SRC_CHN0_INT, you will
> disable the source interrupt? Confusing...
Sorry, the condition should be (schan->int_type & SPRD_DMA_SRC_CHN0_INT)
I will fixed it next vesion.
>
> > sprd_dma_glb_update(sdev, SPRD_DMA_GLB_2STAGE_GRP1, val, val);
> > @@ -451,7 +451,7 @@ static int sprd_dma_set_2stage_config(struct sprd_dma_chn *schan)
> > val = chn & SPRD_DMA_GLB_SRC_CHN_MASK;
> > val |= BIT(schan->trg_mode - 1) << SPRD_DMA_GLB_TRG_OFFSET;
> > val |= SPRD_DMA_GLB_2STAGE_EN;
> > - if (schan->int_type != SPRD_DMA_NO_INT)
> > + if (schan->int_type != SPRD_DMA_SRC_CHN1_INT)
> > val |= SPRD_DMA_GLB_SRC_INT;
> >
> > sprd_dma_glb_update(sdev, SPRD_DMA_GLB_2STAGE_GRP2, val, val);
> > @@ -461,7 +461,7 @@ static int sprd_dma_set_2stage_config(struct sprd_dma_chn *schan)
> > val = (chn << SPRD_DMA_GLB_DEST_CHN_OFFSET) &
> > SPRD_DMA_GLB_DEST_CHN_MASK;
> > val |= SPRD_DMA_GLB_2STAGE_EN;
> > - if (schan->int_type != SPRD_DMA_NO_INT)
> > + if (schan->int_type != SPRD_DMA_DST_CHN0_INT)
> > val |= SPRD_DMA_GLB_DEST_INT;
> >
> > sprd_dma_glb_update(sdev, SPRD_DMA_GLB_2STAGE_GRP1, val, val);
> > @@ -471,7 +471,7 @@ static int sprd_dma_set_2stage_config(struct sprd_dma_chn *schan)
> > val = (chn << SPRD_DMA_GLB_DEST_CHN_OFFSET) &
> > SPRD_DMA_GLB_DEST_CHN_MASK;
> > val |= SPRD_DMA_GLB_2STAGE_EN;
> > - if (schan->int_type != SPRD_DMA_NO_INT)
> > + if (schan->int_type != SPRD_DMA_DST_CHN1_INT)
> > val |= SPRD_DMA_GLB_DEST_INT;
> >
> > sprd_dma_glb_update(sdev, SPRD_DMA_GLB_2STAGE_GRP2, val, val);
> > diff --git a/include/linux/dma/sprd-dma.h b/include/linux/dma/sprd-dma.h
> > index d09c6f6f6da5..26de41d6d915 100644
> > --- a/include/linux/dma/sprd-dma.h
> > +++ b/include/linux/dma/sprd-dma.h
> > @@ -101,6 +101,14 @@ enum sprd_dma_req_mode {
> > * is done.
> > * @SPRD_DMA_CFGERR_INT: configure error interrupt when configuration is
> > * incorrect.
> > + * @SPRD_DMA_SRC_CHN0_INT: interrupt occurred when source channel0
> > + * transfer is done.
> > + * @SPRD_DMA_SRC_CHN1_INT: interrupt occurred when source channel1
> > + * transfer is done.
> > + * @SPRD_DMA_DST_CHN0_INT: interrupt occurred when destination channel0
> > + * transfer is done.
> > + * @SPRD_DMA_DST_CHN1_INT: interrupt occurred when destination channel1
> > + * transfer is done.
> > */
> > enum sprd_dma_int_type {
> > SPRD_DMA_NO_INT,
> > @@ -112,6 +120,10 @@ enum sprd_dma_int_type {
> > SPRD_DMA_TRANS_BLK_INT,
> > SPRD_DMA_LIST_INT,
> > SPRD_DMA_CFGERR_INT,
> > + SPRD_DMA_SRC_CHN0_INT,
> > + SPRD_DMA_SRC_CHN1_INT,
> > + SPRD_DMA_DST_CHN0_INT,
> > + SPRD_DMA_DST_CHN1_INT,
> > };
> >
> > /*
