FW: [PATCH V2 1/2] bindings: fsl-imx-sdma: Document 'HDMI Audio' transfer

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Gentle ping...

BR
Joy Zou

-----Original Message-----
From: Joy Zou 
Sent: 2022年5月24日 16:02
To: vkoul@xxxxxxxxxx
Cc: S.J. Wang <shengjiu.wang@xxxxxxx>; robh+dt@xxxxxxxxxx; krzysztof.kozlowski+dt@xxxxxxxxxx; shawnguo@xxxxxxxxxx; s.hauer@xxxxxxxxxxxxxx; kernel@xxxxxxxxxxxxxx; festevam@xxxxxxxxx; dl-linux-imx <linux-imx@xxxxxxx>; dmaengine@xxxxxxxxxxxxxxx; devicetree@xxxxxxxxxxxxxxx; linux-arm-kernel@xxxxxxxxxxxxxxxxxxx; linux-kernel@xxxxxxxxxxxxxxx
Subject: [PATCH V2 1/2] bindings: fsl-imx-sdma: Document 'HDMI Audio' transfer

Add HDMI Audio transfer type.

convert the sdma bindings txt into yaml in v2.

Signed-off-by: Joy Zou <joy.zou@xxxxxxx>
---
Changes since v1:
convert the sdma bindings txt into yaml in v2.
---
 .../devicetree/bindings/dma/fsl-imx-sdma.yaml | 135 ++++++++++++++++++
 1 file changed, 135 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/dma/fsl-imx-sdma.yaml

diff --git a/Documentation/devicetree/bindings/dma/fsl-imx-sdma.yaml b/Documentation/devicetree/bindings/dma/fsl-imx-sdma.yaml
new file mode 100644
index 000000000000..5b4f7a09a395
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/fsl-imx-sdma.yaml
@@ -0,0 +1,135 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause %YAML 1.2
+---
+$id: http://devicetree.org/schemas/dma/fsl-imx-sdma.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale Smart Direct Memory Access (SDMA) Controller for i.MX
+
+maintainers:
+  - Vinod Koul <vkoul@xxxxxxxxxx>
+
+allOf:
+  - $ref: "dma-controller.yaml#"
+
+# Everything else is described in the common file
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - fsl,imx25-sdma
+          - fsl,imx31-sdma
+          - fsl,imx31-to1-sdma
+          - fsl,imx31-to2-sdma
+          - fsl,imx35-to1-sdma
+          - fsl,imx35-to2-sdma
+          - fsl,imx51-sdma
+          - fsl,imx53-sdma
+          - fsl,imx6q-sdma
+          - fsl,imx7d-sdma
+          - fsl,imx6sx-sdma
+          - fsl,imx6ul-sdma
+          - fsl,imx8mm-sdma
+          - fsl,imx8mn-sdma
+          - fsl,imx8mp-sdma
+      - enum:
+          - fsl,imx35-sdma
+          - fsl,imx8mq-sdma
+
+  reg:
+    description: Should contain SDMA registers location and length
+
+  interrupts:
+    description: Should contain SDMA interrupt
+
+  fsl,sdma-ram-script-name:
+    $ref: /schemas/types.yaml#/definitions/string
+    description: Should contain the full path of SDMA RAM scripts firmware.
+
+  "#dma-cells":
+    const: 3
+    description: |
+      The first cell: request/event ID
+
+      The second cell: peripheral types ID
+        enum:
+          - MCU domain SSI: 0
+          - Shared SSI: 1
+          - MMC: 2
+          - SDHC: 3
+          - MCU domain UART: 4
+          - Shared UART: 5
+          - FIRI: 6
+          - MCU domain CSPI: 7
+          - Shared CSPI: 8
+          - SIM: 9
+          - ATA: 10
+          - CCM: 11
+          - External peripheral: 12
+          - Memory Stick Host Controller: 13
+          - Shared Memory Stick Host Controller: 14
+          - DSP: 15
+          - Memory: 16
+          - FIFO type Memory: 17
+          - SPDIF: 18
+          - IPU Memory: 19
+          - ASRC: 20
+          - ESAI: 21
+          - SSI Dual FIFO: 22
+              description: needs firmware more than ver 2
+          - Shared ASRC: 23
+          - SAI: 24
+          - HDMI Audio: 25
+
+       The third cell: transfer priority ID
+         enum:
+           - High: 0
+           - Medium: 1
+           - Low: 2
+
+  gpr:
+    description: The phandle to the General Purpose Register (GPR) node
+
+  fsl,sdma-event-remap:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    description: |
+      Register bits of sdma event remap, the format is <reg shift val>.
+      - reg: the GPR register offset
+      - shift: the bit position inside the GPR register
+      - val: the value of the bit (0 or 1)
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - fsl,sdma-ram-script-name
+  - "#dma-cells"
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    sdma: dma-controller@83fb0000 {
+      compatible = "fsl,imx51-sdma", "fsl,imx35-sdma";
+      reg = <0x83fb0000 0x4000>;
+      interrupts = <6>;
+      #dma-cells = <3>;
+      fsl,sdma-ram-script-name = "sdma-imx51.bin";
+    };
+
+#DMA clients connected to the i.MX SDMA controller must use the format 
+#described in the dma-controller.yaml file.
+  - |
+    ssi2: ssi@70014000 {
+      compatible = "fsl,imx51-ssi", "fsl,imx21-ssi";
+      reg = <0x70014000 0x4000>;
+      interrupts = <30>;
+      clocks = <&clks 49>;
+      dmas = <&sdma 24 1 0>,
+             <&sdma 25 1 0>;
+      dma-names = "rx", "tx";
+      fsl,fifo-depth = <15>;
+    };
+
+...
--
2.25.1





[Index of Archives]     [Linux Kernel]     [Linux ARM (vger)]     [Linux ARM MSM]     [Linux Omap]     [Linux Arm]     [Linux Tegra]     [Fedora ARM]     [Linux for Samsung SOC]     [eCos]     [Linux PCI]     [Linux Fastboot]     [Gcc Help]     [Git]     [DCCP]     [IETF Announce]     [Security]     [Linux MIPS]     [Yosemite Campsites]

  Powered by Linux