Some on-chip peripheral modules(for eg:- rspi) on RZ/G2L SoC
use the same signal for both interrupt and DMA transfer requests.
The signal works as a DMA transfer request signal by setting
DMARS, and subsequent interrupt requests to the interrupt controller
are masked.
We can enable the interrupt by clearing the DMARS.
This patch adds device_synchronize callback for clearing
DMARS and thereby allowing DMA consumers to switch to
DMA mode.
Signed-off-by: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
---
v1->v2:
* No change
---
drivers/dma/sh/rz-dmac.c | 9 +++++++++
1 file changed, 9 insertions(+)
diff --git a/drivers/dma/sh/rz-dmac.c b/drivers/dma/sh/rz-dmac.c
index ee2872e7d64c..675e6d5319d7 100644
--- a/drivers/dma/sh/rz-dmac.c
+++ b/drivers/dma/sh/rz-dmac.c
@@ -630,6 +630,14 @@ static void rz_dmac_virt_desc_free(struct virt_dma_desc *vd)
*/
}
+static void rz_dmac_device_synchronize(struct dma_chan *chan)
+{
+ struct rz_dmac_chan *channel = to_rz_dmac_chan(chan);
+ struct rz_dmac *dmac = to_rz_dmac(chan->device);
+
+ rz_dmac_set_dmars_register(dmac, channel->index, 0);
+}
+
/*
* -----------------------------------------------------------------------------
* IRQ handling
@@ -909,6 +917,7 @@ static int rz_dmac_probe(struct platform_device *pdev)
engine->device_config = rz_dmac_config;
engine->device_terminate_all = rz_dmac_terminate_all;
engine->device_issue_pending = rz_dmac_issue_pending;
+ engine->device_synchronize = rz_dmac_device_synchronize;
engine->copy_align = DMAENGINE_ALIGN_1_BYTE;
dma_set_max_seg_size(engine->dev, U32_MAX);
--
2.25.1
