From: Conor Dooley <conor.dooley@xxxxxxxxxxxxx> The Canaan k210 apparently has a Sysnopsys Designware AXI DMA controller, but according to the documentation & devicetree it has 6 interrupts rather than the standard one. Support the 6 interrupt configuration by unconditionally extending the binding to a maximum of 8 per-channel interrupts thereby matching the number of possible channels. Link: https://canaan-creative.com/wp-content/uploads/2020/03/kendryte_standalone_programming_guide_20190311144158_en.pdf #Page 51 Reviewed-by: Serge Semin <fancer.lancer@xxxxxxxxx> Reviewed-by: Rob Herring <robh@xxxxxxxxxx> Signed-off-by: Conor Dooley <conor.dooley@xxxxxxxxxxxxx> --- .../devicetree/bindings/dma/snps,dw-axi-dmac.yaml | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) diff --git a/Documentation/devicetree/bindings/dma/snps,dw-axi-dmac.yaml b/Documentation/devicetree/bindings/dma/snps,dw-axi-dmac.yaml index 4324a94b26b2..67aa7bb6d36a 100644 --- a/Documentation/devicetree/bindings/dma/snps,dw-axi-dmac.yaml +++ b/Documentation/devicetree/bindings/dma/snps,dw-axi-dmac.yaml @@ -34,7 +34,12 @@ properties: - const: axidma_apb_regs interrupts: - maxItems: 1 + description: + If the IP-core synthesis parameter DMAX_INTR_IO_TYPE is set to 1, this + will be per-channel interrupts. Otherwise, this is a single combined IRQ + for all channels. + minItems: 1 + maxItems: 8 clocks: items: -- 2.37.0
