[PATCH v2 04/16] spi: dt-bindings: dw-apb-ssi: update spi-{r,t}x-bus-width

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Conor Dooley <conor.dooley@xxxxxxxxxxxxx>

Most users of dw-apb-ssi use spi-{r,t}x-bus-width of 1, however the
Canaan k210 is wired up for a width of 4.
Quoting Serge:
The modern DW APB SSI controllers of v.4.* and newer also support the
enhanced SPI Modes too (Dual, Quad and Octal). Since the IP-core
version is auto-detected at run-time there is no way to create a
DT-schema correctly constraining the Rx/Tx SPI bus widths.
/endquote

As such, drop the restriction on only supporting a bus width of 1.

Link: https://lore.kernel.org/all/20220620205654.g7fyipwytbww5757@mobilestation/
Signed-off-by: Conor Dooley <conor.dooley@xxxxxxxxxxxxx>
---
Serge, I dropped your R-b when I swapped to the default
property since it changed the enum.
---
 Documentation/devicetree/bindings/spi/snps,dw-apb-ssi.yaml | 6 ------
 1 file changed, 6 deletions(-)

diff --git a/Documentation/devicetree/bindings/spi/snps,dw-apb-ssi.yaml b/Documentation/devicetree/bindings/spi/snps,dw-apb-ssi.yaml
index e25d44c218f2..0a43d6e0ef91 100644
--- a/Documentation/devicetree/bindings/spi/snps,dw-apb-ssi.yaml
+++ b/Documentation/devicetree/bindings/spi/snps,dw-apb-ssi.yaml
@@ -143,12 +143,6 @@ patternProperties:
         minimum: 0
         maximum: 3
 
-      spi-rx-bus-width:
-        const: 1
-
-      spi-tx-bus-width:
-        const: 1
-
 unevaluatedProperties: false
 
 required:
-- 
2.36.1




[Index of Archives]     [Linux Kernel]     [Linux ARM (vger)]     [Linux ARM MSM]     [Linux Omap]     [Linux Arm]     [Linux Tegra]     [Fedora ARM]     [Linux for Samsung SOC]     [eCos]     [Linux PCI]     [Linux Fastboot]     [Gcc Help]     [Git]     [DCCP]     [IETF Announce]     [Security]     [Linux MIPS]     [Yosemite Campsites]

  Powered by Linux