On Fri, Jun 24, 2022 at 06:41:02AM -0700, Jerry Snitselaar wrote:
> On Fri, Jun 24, 2022 at 09:43:30AM +0800, Baolu Lu wrote:
> > On 2022/6/24 09:14, Jerry Snitselaar wrote:
> > > On Fri, Jun 24, 2022 at 08:55:08AM +0800, Baolu Lu wrote:
> > > > On 2022/6/24 01:02, Jerry Snitselaar wrote:
> > > > > Hi Baolu & Dave,
> > > > >
> > > > > I noticed last night that on a Sapphire Rapids system if you boot without
> > > > > intel_iommu=on, the idxd driver will crash during probe in iommu_sva_bind_device().
> > > > > Should there be a sanity check before calling dev_iommu_ops(), or is the expectation
> > > > > that the caller would verify it is safe to call? This seemed to be uncovered by
> > > > > the combination of 3f6634d997db ("iommu: Use right way to retrieve iommu_ops"), and
> > > > > 42a1b73852c4 ("dmaengine: idxd: Separate user and kernel pasid enabling").
> > > > >
> > > > > [ 21.423729] BUG: kernel NULL pointer dereference, address: 0000000000000038
> > > > > [ 21.445108] #PF: supervisor read access in kernel mode
> > > > > [ 21.450912] #PF: error_code(0x0000) - not-present page
> > > > > [ 21.456706] PGD 0
> > > > > [ 21.459047] Oops: 0000 [#1] PREEMPT SMP NOPTI
> > > > > [ 21.464004] CPU: 0 PID: 1420 Comm: kworker/0:3 Not tainted 5.19.0-0.rc3.27.eln120.x86_64 #1
> > > > > [ 21.464011] Hardware name: Intel Corporation EAGLESTREAM/EAGLESTREAM, BIOS EGSDCRB1.SYS.0067.D12.2110190954 10/19/2021
> > > > > [ 21.464015] Workqueue: events work_for_cpu_fn
> > > > > [ 21.464030] RIP: 0010:iommu_sva_bind_device+0x1d/0xe0
> > > > > [ 21.464046] Code: c3 cc 66 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 41 57 41 56 49 89 d6 41 55 41 54 55 53 48 83 ec 08 48 8b 87 d8 02 00 00 <48> 8b 40 38 48 8b 50 10 48 83 7a 70 00 48 89 14 24 0f 84 91 00 00
> > > > > [ 21.464050] RSP: 0018:ff7245d9096b7db8 EFLAGS: 00010296
> > > > > [ 21.464054] RAX: 0000000000000000 RBX: ff1eadeec8a51000 RCX: 0000000000000000
> > > > > [ 21.464058] RDX: ff7245d9096b7e24 RSI: 0000000000000000 RDI: ff1eadeec8a510d0
> > > > > [ 21.464060] RBP: ff1eadeec8a51000 R08: ffffffffb1a12300 R09: ff1eadffbfce25b4
> > > > > [ 21.464062] R10: ffffffffffffffff R11: 0000000000000038 R12: ffffffffc09f8000
> > > > > [ 21.464065] R13: ff1eadeec8a510d0 R14: ff7245d9096b7e24 R15: ff1eaddf54429000
> > > > > [ 21.464067] FS: 0000000000000000(0000) GS:ff1eadee7f600000(0000) knlGS:0000000000000000
> > > > > [ 21.464070] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
> > > > > [ 21.464072] CR2: 0000000000000038 CR3: 00000008c0e10006 CR4: 0000000000771ef0
> > > > > [ 21.464074] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
> > > > > [ 21.464076] DR3: 0000000000000000 DR6: 00000000fffe07f0 DR7: 0000000000000400
> > > > > [ 21.464078] PKRU: 55555554
> > > > > [ 21.464079] Call Trace:
> > > > > [ 21.464083] <TASK>
> > > > > [ 21.464092] idxd_pci_probe+0x259/0x1070 [idxd]
> > > > > [ 21.464121] local_pci_probe+0x3e/0x80
> > > > > [ 21.464132] work_for_cpu_fn+0x13/0x20
> > > > > [ 21.464136] process_one_work+0x1c4/0x380
> > > > > [ 21.464143] worker_thread+0x1ab/0x380
> > > > > [ 21.464147] ? _raw_spin_lock_irqsave+0x23/0x50
> > > > > [ 21.464158] ? process_one_work+0x380/0x380
> > > > > [ 21.464161] kthread+0xe6/0x110
> > > > > [ 21.464168] ? kthread_complete_and_exit+0x20/0x20
> > > > > [ 21.464172] ret_from_fork+0x1f/0x30
> > > > >
> > > > > I figure either there needs to be a check in iommu_sva_bind_device, or
> > > > > idxd needs to check in idxd_enable_system_pasid that that
> > > > > idxd->pdev->dev.iommu is not null before it tries calling iommu_sva_bind_device.
> > > >
> > > > As documented around the iommu_sva_bind_device() interface:
> > > >
> > > > * iommu_dev_enable_feature(dev, IOMMU_DEV_FEAT_SVA) must be called first,
> > > > to
> > > > * initialize the required SVA features.
> > > >
> > > > idxd->pdev->dev.iommu should be checked in there.
> > > >
> > > > Dave, any thoughts?
> > > >
> > > > Best regards,
> > > > baolu
> > >
> > > Duh, sorry I missed that in the comments.
> > >
> > > It calls iommu_dev_enable_feature(), but then goes into code that
> > > calls iommu_sva_bind_device whether or not iommu_dev_enable_feature()
> > > fails.
> > >
> > > You also will get the following warning if you don't have scalable
> > > mode enabled (either not enabled by default, or if enabled by default
> > > and passed intel_iommu=on,sm_off):
> >
> > If scalable mode is disabled, iommu_dev_enable_feature(IOMMU_SVA) will
> > return failure, hence driver should not call iommu_sva_bind_device().
> > I guess below will disappear if above is fixed in the idxd driver.
> >
> > Best regards,
> > baolu
> >
>
> It looks like there was a recent maintainer change, and Fenghua is now
> the maintainer. Fenghua thoughts on this? With 42a1b73852c4
> ("dmaengine: idxd: Separate user and kernel pasid enabling") the code
> no longer depends on iommu_dev_feature_enable succeeding. Testing with
> something like this works (ran dmatest without sm_on, and
> dsa_user_test_runner.sh with sm_on, plus booting with various
> intel_iommu= combinations):
>
> diff --git a/drivers/dma/idxd/init.c b/drivers/dma/idxd/init.c
> index 355fb3ef4cbf..5b49fd5c1e25 100644
> --- a/drivers/dma/idxd/init.c
> +++ b/drivers/dma/idxd/init.c
> @@ -514,13 +514,14 @@ static int idxd_probe(struct idxd_device *idxd)
> if (IS_ENABLED(CONFIG_INTEL_IDXD_SVM) && sva) {
> if (iommu_dev_enable_feature(dev, IOMMU_DEV_FEAT_SVA))
> dev_warn(dev, "Unable to turn on user SVA feature.\n");
> - else
> + else {
> set_bit(IDXD_FLAG_USER_PASID_ENABLED, &idxd->flags);
>
> - if (idxd_enable_system_pasid(idxd))
> - dev_warn(dev, "No in-kernel DMA with PASID.\n");
> - else
> - set_bit(IDXD_FLAG_PASID_ENABLED, &idxd->flags);
> + if (idxd_enable_system_pasid(idxd))
> + dev_warn(dev, "No in-kernel DMA with PASID.\n");
> + else
> + set_bit(IDXD_FLAG_PASID_ENABLED, &idxd->flags);
> + }
> } else if (!sva) {
> dev_warn(dev, "User forced SVA off via module param.\n");
> }
>
> The commit description is a bit confusing, because it talks about there
> being no dependency, but ties user pasid to enabling/disabling the SVA
> feature, which system pasid would depend on as well.
>
> Regards,
> Jerry
Things like that warning message "Unable to turn on user SVA feature" when
iommu_dev_enable_feature fails though seems to be misleading with user
inserted in there. I'll leave it to the idxd folks to figure out.
>
> > >
> > > [ 24.645784] idxd 0000:6a:01.0: enabling device (0144 -> 0146)
> > > [ 24.645871] idxd 0000:6a:01.0: Unable to turn on user SVA feature.
> > > [ 24.645932] ------------[ cut here ]------------
> > > [ 24.645935] WARNING: CPU: 0 PID: 422 at drivers/iommu/intel/pasid.c:253 intel_pasid_get_entry.isra.0+0xcd/0xe0
> > > [ 24.675872] Modules linked in: intel_uncore(+) drm_ttm_helper isst_if_mbox_pci(+) idxd(+) snd i2c_i801(+) isst_if_mmio ttm isst_if_common mei fjes(+) soundcore intel_vsec i2c_ismt i2c_smbus idxd_bus ipmi_ssif acpi_ipmi ipmi_si acpi_pad acpi_power_meter pfr_telemetry pfr_update vfat fat fuse xfs crct10dif_pclmul crc32_pclmul crc32c_intel ghash_clmulni_intel igc wmi pinctrl_emmitsburg ipmi_devintf ipmi_msghandler
> > > [ 24.716612] CPU: 0 PID: 422 Comm: kworker/0:2 Not tainted 5.19.0-0.rc3.27.eln120.x86_64 #1
> > > [ 24.716621] Hardware name: Intel Corporation EAGLESTREAM/EAGLESTREAM, BIOS EGSDCRB1.SYS.0067.D12.2110190954 10/19/2021
> > > [ 24.716625] Workqueue: events work_for_cpu_fn
> > > [ 24.716645] RIP: 0010:intel_pasid_get_entry.isra.0+0xcd/0xe0
> > > [ 24.716656] Code: a9 d1 ff ff 48 89 c7 48 85 c0 75 9e 31 c0 5b 5d 41 5c 41 5d c3 cc 41 83 e4 3f 5b 5d 49 c1 e4 06 4a 8d 04 27 41 5c 41 5d c3 cc <0f> 0b 31 c0 eb de 48 8b 05 e6 dd 59 01 eb 87 0f 1f 40 00 0f 1f 44
> > > [ 24.716664] RSP: 0018:ff848155c79bfd00 EFLAGS: 00010046
> > > [ 24.716671] RAX: 0000000000000206 RBX: ff3deaf807bfdcc0 RCX: 0000000000000001
> > > [ 24.716677] RDX: 0000000000000000 RSI: 0000000000000001 RDI: ff3deb0789f53240
> > > [ 24.716682] RBP: ff3deb0789f53780 R08: 0000000000000001 R09: 0000000000000003
> > > [ 24.716688] R10: ff848155c79bfcf8 R11: 0000000000000000 R12: 0000000000000003
> > > [ 24.716693] R13: 0000000000000001 R14: 0000000000000001 R15: ffffffff84e10000
> > > [ 24.716700] FS: 0000000000000000(0000) GS:ff3deb073f600000(0000) knlGS:0000000000000000
> > > [ 24.716705] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
> > > [ 24.716709] CR2: 0000558a19e81c58 CR3: 0000000108252005 CR4: 0000000000771ef0
> > > [ 24.716714] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
> > > [ 24.716719] DR3: 0000000000000000 DR6: 00000000fffe07f0 DR7: 0000000000000400
> > > [ 24.716723] PKRU: 55555554
> > > [ 24.716726] Call Trace:
> > > [ 24.716731] <TASK>
> > > [ 24.716738] intel_pasid_setup_first_level+0x36/0x200
> > > [ 24.716753] intel_svm_bind+0x2f8/0x3a0
> > > [ 24.716767] iommu_sva_bind_device+0x9b/0xe0
> > > [ 24.716785] idxd_pci_probe+0x259/0x1070 [idxd]
> > > [ 24.716866] local_pci_probe+0x3e/0x80
> > > [ 24.716890] work_for_cpu_fn+0x13/0x20
> > > [ 24.716900] process_one_work+0x1c4/0x380
> > > [ 24.716912] worker_thread+0x1ab/0x380
> > > [ 24.716922] ? _raw_spin_lock_irqsave+0x23/0x50
> > > [ 24.716945] ? process_one_work+0x380/0x380
> > > [ 24.716954] kthread+0xe6/0x110
> > > [ 24.716967] ? kthread_complete_and_exit+0x20/0x20
> > > [ 24.716976] ret_from_fork+0x1f/0x30
> > > [ 24.716999] </TASK>
> > > [ 24.717000] ---[ end trace 0000000000000000 ]---
> > > [ 24.717019] ------------[ cut here ]------------
> > >
> > > regards,
> > > Jerry
> > >
> >
>
