Re: [PATCH v12 0/8] Enable designware PCI EP EDMA locally

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, Jun 16, 2022 at 08:40:41AM -0700, Vinod Koul wrote:
> On 16-06-22, 18:20, Serge Semin wrote:
> > On Thu, Jun 16, 2022 at 07:30:23AM -0700, Vinod Koul wrote:
> > > On 16-06-22, 17:03, Serge Semin wrote:
> > > > On Thu, Jun 16, 2022 at 05:02:00PM +0300, Serge Semin wrote:
> > > > > On Thu, Jun 16, 2022 at 04:54:13PM +0300, Serge Semin wrote:
> > > > > > On Thu, Jun 16, 2022 at 06:51:55AM -0700, Vinod Koul wrote:
> > > > > > > On 24-05-22, 10:21, Frank Li wrote:
> > > > > > > > Default Designware EDMA just probe remotely at host side.
> > > > > > > > This patch allow EDMA driver can probe at EP side.
> > > > > > > > 
> > > > > > > > 1. Clean up patch
> > > > > > > >    dmaengine: dw-edma: Detach the private data and chip info structures
> > > > > > > >    dmaengine: dw-edma: Remove unused field irq in struct dw_edma_chip
> > > > > > > >    dmaengine: dw-edma: Change rg_region to reg_base in struct
> > > > > > > >    dmaengine: dw-edma: rename wr(rd)_ch_cnt to ll_wr(rd)_cnt in struct
> > > > > > > > 
> > > > > > > > 2. Enhance EDMA driver to allow prode eDMA at EP side
> > > > > > > >    dmaengine: dw-edma: Add support for chip specific flags
> > > > > > > >    dmaengine: dw-edma: Add DW_EDMA_CHIP_32BIT_DBI for chip specific
> > > > > > > > flags (this patch removed at v11 because dma tree already have fixed
> > > > > > > > patch)
> > > > > > > > 
> > > > > > > > 3. Bugs fix at EDMA driver when probe eDMA at EP side
> > > > > > > >    dmaengine: dw-edma: Fix programming the source & dest addresses for
> > > > > > > > ep
> > > > > > > >    dmaengine: dw-edma: Don't rely on the deprecated "direction" member
> > > > > > > > 
> > > > > > > > 4. change pci-epf-test to use EDMA driver to transfer data.
> > > > > > > >    PCI: endpoint: Add embedded DMA controller test
> > > > > > > > 
> > > > > > > > 5. Using imx8dxl to do test, but some EP functions still have not
> > > > > > > > upstream yet. So below patch show how probe eDMA driver at EP
> > > > > > > > controller driver.
> > > > > > > > https://lore.kernel.org/linux-pci/20220309120149.GB134091@thinkpad/T/#m979eb506c73ab3cfca2e7a43635ecdaec18d8097
> > > > > > > 
> > > > > > 
> > > > > > > Applied to dmaengine-next, thanks
> > > > > > 
> > > > > 
> > > > > > Vinod, this was supposed to be merged in through PCIe repo.( I asked
> > > > > > many times of that. Bjorn also agreed to merge it in. Could drop it
> > > > > > from yout repo?
> > > > > 
> > > > 
> > > > > I asked it several time including in the framework of this thread:
> > > > > https://lore.kernel.org/dmaengine/20220525092306.wuansog6fe2ika3b@mobilestation/
> > > > > There are dependencies of my patchsets from this one. Please consider
> > > > > dropping it from your dmaengine-next repo while it's still possible
> > > > > since taking DW eDMA and PCie patches through the PCie repo would be
> > > > > more natural.
> > > > 
> > > > The only thing we were waiting for was you ack tag...
> > > 
> > 
> > > Is there any dependency, since this has many dmaengine patches and one
> > > pcie patch which was acked by Kishon, so can go thru dmaengine tree...
> > 
> > Right. This one is fully suitable for the DMA-engine tree, but there
> > are dependencies of my work from this series. My patchsets in its turn
> > concern both PCIe and DMA-engine parts.
> > 
> > Here is the deal. My work consists of four patchsets:
> > [PATCH v4 00/18] PCI: dwc: Various fixes and cleanups
> > https://lore.kernel.org/linux-pci/20220610082535.12802-1-Sergey.Semin@xxxxxxxxxxxxxxxxxxxx/
> > [PATCH v3 00/15] PCI: dwc: Add hw version and dma-ranges support
> > https://lore.kernel.org/linux-pci/20220610084444.14549-1-Sergey.Semin@xxxxxxxxxxxxxxxxxxxx/
> > [PATCH v3 00/17] PCI: dwc: Add generic resources and Baikal-T1 support
> > https://lore.kernel.org/linux-pci/20220610085706.15741-1-Sergey.Semin@xxxxxxxxxxxxxxxxxxxx/
> > [PATCH v3 00/24] dmaengine: dw-edma: Add RP/EP local DMA controllers support
> > https://lore.kernel.org/dmaengine/20220610091459.17612-1-Sergey.Semin@xxxxxxxxxxxxxxxxxxxx/
> > 
> > The last patchset depends on the Frank series and my DW PCIe
> > patchsets listed above. To cut it shortly here is the
> > dependencies graph:
> > 
> >                 PCIe RP/EP            |               DMA engine
> >                     ^                 |                   ^
> >                     |                 |                   |
> > 1. Semin: [PATCH v4 00/18] "PCI: dwc: |                   |
> >    Various fixes and cleanups"        |                   |
> >                     ^                 |                   |
> >                     |                 |                   |
> > 2. Semin: [PATCH v3 00/15] "PCI: dwc: |                   |
> >    Add hw version and dma-ranges      |                   |
> >    support"                           |                   |
> >                     ^                 |                   |
> >                     |                 |                   |
> > 3. Semin: [PATCH v3 00/17] "PCI: dwc: | 4. Li: [PATCH v12 0/8] "Enable
> >    Add generic resources and Baikal-T1|    designware PCI EP EDMA locally"
> >    support"                           |                   ^
> >                     ^                                     |
> >                     |                                     |
> >                     +-----------------+-------------------+
> >                                       |
> >              5. Semin: [PATCH v3 00/24] "dmaengine: dw-edma:
> >                 Add RP/EP local DMA controllers support"
> > 
> > As you can see my series (5) depends on the Frank' series (4). My series
> > in its turn depends on the PCI patchsets (3), (2) and (1). So if you get
> > to merge the Frank' patchset into your tree we'll need to merge the
> > rest of the patchsets through your repo too. Seeing the DW eDMA device
> > is implemented as either a separate PCIe device or embedded into the
> > DW PCIe RP/EP controller and there are many PCI-related patches in my
> > work, it would be more suitable to merge all the patches through the
> > PCIe tree. Bjorn already agreed to do that here:
> > https://lore.kernel.org/linux-pci/20220524155201.GA247821@bhelgaas/
> > We only waited for your ackes. BTW should you have some free time
> > please review my series (5) too since it mainly concerns the DW eDMA
> > driver (though Mani, in Cc, has already done it and even performed
> > the testing).
> > 
> > > 
> > > I can drop if that suits all...
> > 
> > Yes please. Please drop the Frank' series from your repo, give your
> > explicit ack if you are ok with it and let's merge it and the rest of
> > the work through the Bjorn' repo. Patchset (1) has been fully reviewed.
> > Series (2) and (3) need one more iteration to be finished. So I very
> > much hope they will be done in the next few weeks, before the next
> > merge window.
> 

> Ok dropped now

Great! Thank you very much. Bjord has just merged in the series
through his repo.

-Sergey

> 
> -- 
> ~Vinod



[Index of Archives]     [Linux Kernel]     [Linux ARM (vger)]     [Linux ARM MSM]     [Linux Omap]     [Linux Arm]     [Linux Tegra]     [Fedora ARM]     [Linux for Samsung SOC]     [eCos]     [Linux PCI]     [Linux Fastboot]     [Gcc Help]     [Git]     [DCCP]     [IETF Announce]     [Security]     [Linux MIPS]     [Yosemite Campsites]

  Powered by Linux