Re: [PATCH v2 1/2] dt-bindings: dma: rework qcom,adm Documentation to yaml schema

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, 16 Jun 2022 01:54:03 +0200, Christian Marangi wrote:
> Rework the qcom,adm Documentation to yaml schema.
> This is not a pure conversion since originally the driver has changed
> implementation for the #dma-cells and was wrong from the start.
> Also the driver now handles the common DMA clients implementation with
> the first cell that denotes the channel number and nothing else since
> the client will have to provide the crci information via other means.
> 
> Signed-off-by: Christian Marangi <ansuelsmth@xxxxxxxxx>
> ---
> v2:
> - Change Sob to Christian Marangi
> - Add Bjorn in the maintainers list
> 
>  .../devicetree/bindings/dma/qcom,adm.yaml     | 96 +++++++++++++++++++
>  .../devicetree/bindings/dma/qcom_adm.txt      | 61 ------------
>  2 files changed, 96 insertions(+), 61 deletions(-)
>  create mode 100644 Documentation/devicetree/bindings/dma/qcom,adm.yaml
>  delete mode 100644 Documentation/devicetree/bindings/dma/qcom_adm.txt
> 

Running 'make dtbs_check' with the schema in this patch gives the
following warnings. Consider if they are expected or the schema is
incorrect. These may not be new warnings.

Note that it is not yet a requirement to have 0 warnings for dtbs_check.
This will change in the future.

Full log is available here: https://patchwork.ozlabs.org/patch/


dma-controller@18300000: reset-names:1: 'c0' was expected
	arch/arm/boot/dts/qcom-ipq8064-ap148.dtb
	arch/arm/boot/dts/qcom-ipq8064-rb3011.dtb

dma-controller@18300000: reset-names:2: 'c1' was expected
	arch/arm/boot/dts/qcom-ipq8064-ap148.dtb
	arch/arm/boot/dts/qcom-ipq8064-rb3011.dtb

dma-controller@18300000: reset-names:3: 'c2' was expected
	arch/arm/boot/dts/qcom-ipq8064-ap148.dtb
	arch/arm/boot/dts/qcom-ipq8064-rb3011.dtb

dma-controller@18300000: reset-names: ['clk', 'pbus', 'c0', 'c1', 'c2'] is too long
	arch/arm/boot/dts/qcom-ipq8064-ap148.dtb
	arch/arm/boot/dts/qcom-ipq8064-rb3011.dtb

dma-controller@18300000: resets: [[11, 13], [11, 12], [11, 11], [11, 10], [11, 9]] is too long
	arch/arm/boot/dts/qcom-ipq8064-ap148.dtb
	arch/arm/boot/dts/qcom-ipq8064-rb3011.dtb




[Index of Archives]     [Linux Kernel]     [Linux ARM (vger)]     [Linux ARM MSM]     [Linux Omap]     [Linux Arm]     [Linux Tegra]     [Fedora ARM]     [Linux for Samsung SOC]     [eCos]     [Linux PCI]     [Linux Fastboot]     [Gcc Help]     [Git]     [DCCP]     [IETF Announce]     [Security]     [Linux MIPS]     [Yosemite Campsites]

  Powered by Linux