[PATCH v3 01/24] dmaengine: Fix dma_slave_config.dst_addr description

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Most likely due to a copy-paste mistake the dst_addr member of the
dma_slave_config structure has been marked as ignored if the !source!
address belong to the memory. That is relevant to the src_addr field of
the structure while the dst_addr field as containing a destination device
address is supposed to be ignored if the destination is the CPU memory.
Let's fix the field description accordingly.

Signed-off-by: Serge Semin <Sergey.Semin@xxxxxxxxxxxxxxxxxxxx>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
Tested-by: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
---
 include/linux/dmaengine.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/include/linux/dmaengine.h b/include/linux/dmaengine.h
index 842d4f7ca752..f204ea16ac1c 100644
--- a/include/linux/dmaengine.h
+++ b/include/linux/dmaengine.h
@@ -395,7 +395,7 @@ enum dma_slave_buswidth {
  * should be read (RX), if the source is memory this argument is
  * ignored.
  * @dst_addr: this is the physical address where DMA slave data
- * should be written (TX), if the source is memory this argument
+ * should be written (TX), if the destination is memory this argument
  * is ignored.
  * @src_addr_width: this is the width in bytes of the source (RX)
  * register where DMA data shall be read. If the source
-- 
2.35.1




[Index of Archives]     [Linux Kernel]     [Linux ARM (vger)]     [Linux ARM MSM]     [Linux Omap]     [Linux Arm]     [Linux Tegra]     [Fedora ARM]     [Linux for Samsung SOC]     [eCos]     [Linux PCI]     [Linux Fastboot]     [Gcc Help]     [Git]     [DCCP]     [IETF Announce]     [Security]     [Linux MIPS]     [Yosemite Campsites]

  Powered by Linux